HT3669 Lexmark Optra E310 not available?

I tried to install a printer connected via AirPort, the printed is easily found and offered to "Download & Install", however, it failed with following dialog,
Setting up ‘Lexmark International Lexmark Optra E310…’
Can't install the software for the Lexmark International Lexmark Optra E310 because it is not currently available from the Software Update server.
Where can I find the driver?
Cheers,
Henry

For OS X 10.8 or later:
OS X Mountain Lion: Reset the printing system
For earlier versions of OS X:
Mac OS X: How to reset the printing system

Similar Messages

Connect Lexmark Optra E310 printer to iMAC

I have recently purchased aniMAC running OS Lion and cannot connect my Lexmark Optra E310 printer. I am using a parralel port/usb connector but no message shows on the screen - I expected to see an installation wizard of some sort. Can anyone help please?

Your post is a little confusing, there isn't any such thing as a wireless cable modem. Are you sure you aren't talking about a wi-fi router?
Also have you read the instructions for connecting it?
Roger

Lexmark Optra T610: "Printer Not Responding"

Right. Where to start. Just got a new PB G4 17". Used to have a titanium G4 15" running 10.1 through 10.3. Now running 10.4.3 on this new 'book. I have a Lexmark Optra T610 with the USB option, which used to function just fine on the old computer but which is now making me want to toss gasoline and a lighted match on it. Basically, all the necessary software has been installed and the correct (ie, working) cable has been connected. The Printer Setup Utility sees and recognizes the printer, and I can select it in all the print dialogs, as well as change various settings such as resolution. However, when I press Print and the computer does its thing and sends the file to the printer, I get an error message saying "Printer Not Responding". This is driving me nuts and I can't find any word of this anywhere (mind you, I haven't come to the "end" of the internet yet, so maybe the answer is actually out there somewhere). And yes, I have tried doing strange things, such as deleting PPDs and preferences and so forth. I've also gone through all the menus on the printer until it's obvious I'm going in circles. It's like the printer has turned into a feline that simply ignores its master. GRRRR!!!! Thanks for any help you can provide. --Pete

I have had exactly the same problem from my iBook. Until I upgraded to Tiger all I had to do was plug in the USB cable and print. Now I get the "Printer Not Responding" message. I install the latest print driver for OS 10.4 from Lexmark and the computer lists the printer in the print dialog box.
I spoke with Apple tech support and he suggested resetting the printing system after reviewing what else I had done. Noting had worked and neither did this. The only other thing he could suggest was to contact Lexmark, if that didn't work he said we would have to try an archive and reinstall.
I really hope someone has a more constructive suggestion.
Thanks,
Edward
G4 PowerMac 350Mhz & G4 iBook 14 1.33GHz Mac OS X (10.4.2)

Lexmark Optra S 1255 and mac 10.6.8--not working? I have a 1284 cable, installed drivers, but it just swirls and states "printer offline"? Anybody? I really like this old laser printer. thanks for looking

1. Hello
2. Problem with old laser printer and compatibility.
3. My computer is a iMac
4. running 10.6.8
5. printer: Lexmark Optra S 1255
6. bought a IEEE 1284 printer cable
7. installed drivers
8. When I add the printer, it just swirls and state"printer offline"
9. Any advise would be greatly appreciated?

Explain #8.
Did you restart after adding the drivers?
If you open the System Profiler, under Firewire or Printers what do yo see?
(Apple Menu/About this Mac/More Info/Firewire or Printer)
If it sees them then you know it's a configuration problem.

Dual Core 10.4.4 & Lexmark Optra R+

I did a couple of short searches but no evident discussion readily available about this combination.
I purchased a Lexmark Optra R+ and AppleTalk in 1996 for use with a Power Mac 7500. A great working pair with OS 7, 8 and thru 9 and Lexmark continued to update the necessary supporting drivers.
In 2003, I purchased a G4 Dual 867 and began using OS X right away. I remember no trouble getting the Optra to work with 10.2.3 well from the start. The OS X drivers were again available from Lexmark. This time, I used it on a LAN running it at the end thru a router then a switch. Not only did the G4 use its services well, but a couple of WiFi computers (windoz) were suing it also.
Now we come to the present day. After a couple months of down time with a bad fuser, I got the Optra up and running again last week, and proceeded to begin the installation to a G5 Quad (now 10.4.4) I received December 1, 2005.
Again, Lexmark has a driver specific OS X.4. It’s really nice that they continue to work on drivers for a 10-year-old machine.
The driver installed easily enough, the Quad seemed to recognize its driver and the fact that it’s connected to the network, but it will not print a page. Even though it activates the printer from inactive mode just like the other two Macs, did, it seems to chew on the information being sent for a little while, then just goes back into its state of rest, not even a blank page is spit out. Bummer. I've also tried installing it on the second Ethernet port with a direct cable with the same symptoms as a result.
I’ve deleted and done the install process twice, talked to Apple Support (yes I have Applecare, doesn’t everyone?) for an hour (their stumped having me do that delete and install once again).
Well, that’s the basics. I suppose I could go on, but most of you will not care or have a clue. I understand, but for that one or two of you that might just have already been there, I’d appreciate your assist. Feel welcome in emailing me if you would like more explanation.
The worst that can happen would be that my poor baby will be relegated to the steady work from those other afore mentioned machines. Ugh!
Hey, if I haven’t already mentioned it to all of you, have a Happy New Year.

While checking other issues, I finally figured out where to install the correct settings for the network printer. Works fine now.

Hp laserjet 1022 driver not available

I am running 10.8.2 on a MacBookPro. After the recent update of the OS my HP Laserjet 1022 stopped functioning. In Mountain Lion, the HP drivers are meant to be installed by the OS. However all my attempts to update the driver software from within System Preferences, to to install a new printer have failed. I always get an error message saying that the appropriate software was not available on the server. Anyone have any ideas on hwo to fix this, or where to get driver software that I can manually install?

Power cycle both devices and try by downloading manually necessary drivers:
http://support.apple.com/kb/DL907
After downloading software, try add your printer again.
Acording to this:
http://support.apple.com/kb/ht3669#HP
Your printer is supported.

Just bought a new PC with Windows 7 installed on it. I'm having trouble Adding my Lexmark Optra S 1625 Printer ( no drivers found )?

I have contacted Lexmark and they claim that the OS has a compatable driver included. But, so far I have NOT been successful at adding the printer. The Optra S 1625 is currently shared by one of my XP PC's on my network. My new, Windows 7 PC, is finding the printer just fine, but is not able to locate an acceptalbe driver for it. Perhaps, I am just not familiar enough yet with how to work with Windows 7 to get around the issue. I need some help. Lexmark claims that Windows 7 should have a compatable driver included with the OS ??? Please Advise.

Hi Fidmon,
After performing a research, I just get the same conclusion as Rick Dee and Shadow Walker. There is no Lexmark Optra S 1625 Printer driver for Windows 7 provided on Windows Update Catalog. Also, no driver downloading information for your printer listed on the Lexmark Product Download Center.
At this time, you can try the suggestions raised by Shadow Walker to install the similar printer driver to check the issue. For your convenicen, I have located a driver for OPTRA S 1255 printer. Please download and install the driver to test the issue.
Please note: Since this is a Windows XP driver, I can't guarantee if it works for you, but we can try installing the driver under Windows XP Compatible Mode.
OPTRA S 1255
If the driver did not work, I strongly suggest communicating with Lexmark Support and ask them to produce the proper driver for Windows 7.
Judy :)

Lexmark Optra S 1255 Driver

Each time I print a document the Lexmark Optra S 1255 prints the job, and then an error page:
ERROR: undefinded
OFFENDING COMMAND:
STACK:
I am using Mac OS X 10.5.4 I downloaded the latest drivers from lexmark's website. I don't know where the problem is for the printer IS printing. There must been some data sent that the printer does not understand.
The error is printed even though I switched OFF the PS error page printing in the Lexmark's menu.
Anybody who has an idea or who could solve this problem is most welcome.
Thanx

Explain #8.
Did you restart after adding the drivers?
If you open the System Profiler, under Firewire or Printers what do yo see?
(Apple Menu/About this Mac/More Info/Firewire or Printer)
If it sees them then you know it's a configuration problem.

Last os upgrade creates printing error on Lexmark Optra E 312L

Dear Common Wisdom:
Every since I installed the 10.5.4 upgrade I can't print to my USB-connected Lexmark Optra E312L.
The following message is always printed out:
ERROR: undefined
OFFENDING COMMAND: csq
STACK:
Any ideas?

Here's what Lexmark techsupport responded to my inquiry:
Thank you for contacting Lexmark email support. I appreciate the opportunity to assist you.
In reply to your email, this printer is not supported on MAC 10.5 (Leopard) machine. I am not sure what driver have
you installed to print from this printer. This is why you are getting only this error message instead of printing the
document. If you open the compatibility list, you can find that Optra E312 L is not compatible with MAC Leopard.
I guess that's it? My printer died with 10.5.
No chance to revive it?

[Solved]"foomatic-rip" for printer "Z22" not available

I found CUPS drivers for the lexmark Z22 here: http://www.linuxprinting.org/show_print … exmark-Z22 and I installed the printer successfully but I get this in the status field: "Paused: Filter "foomatic-rip" for printer "Z22" not available: No such file or directory". I checked AUR and there's no foomatic-rip package.
Last edited by jordanwb (2008-12-17 17:58:44)

pacman -S foomatic-db foomatic-db-engine foomatic-filters
foomatic-filters itself might even be enough in your case

My app store wont let me download apps, says they are not available in the uk please help??

my app store wont let me download apps, says there not available in the uk?? please help??

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

Laptop (Running Windows 8.1) no longer able to print and now see message Active Directory Domain Services is not available

Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-Chris

Hi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

My external hard drive is not recognized by Time Machine; "The backup disk is not available" according to Disk Utility

I'm not completely tech savvy, but I'm having troubles with my external memory & time machine. I'm a student, and thus its very important to me to be able to back up my computer.
I wanted to back up my Time Machine the other day. I clicked the icon at the top of the page (beside the battery icon, etc.) and the message "The backup disk is not available". I have a 500GB Seagate passport (ie: http://www.bestbuy.com/site/Seagate---FreeAgent-GoFlex-500GB-External-USB-2.0-Po rtable-Hard-Drive---Silver/9929098.p?id=1218196478444&skuId=9929098)
My macbook pro is version 10.7.5 Mac OS X Lion. My external memory is only about a year old. It hasn't been dropped or anything; it permanently sits secured to my desk.
What appears when I click "Repair Disk":
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file shutdown_time
(It should be 1 instead of 0)
Invalid node structure
Rebuilding catalog B-tree.
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
After clicking "Repair Disk" this message pops up: "Disk Utility Stopped Repairing 'Time Machine Backups' Disk utility can't repair this disk. Back up as many as your files as possible, reformat the disk, and restore your backed-up files."
I don't want to wipe my memory on my external disk just in case the disk doesn't restore (as I do not have another disk to back up my computer on to).
What is going on? Why is this happening out of the blue? How can I fix this?

Sounds like it either has, or is about to die.
If you don't need anything off the old drive, then yes, replace it immediately with something a little more reolaable. I use WD Caviar Black personally. But anything that has a known low failure rate.

In Pages 5.2, some fonts "not available", yet present in Font Book and working in other apps

Using Pages 5.2, I open a document created in a previous version, and I get error messages about certain fonts within a font family being "not available" in OS X. However, these supposedly unavailable fonts are present in Font Book and work just fine in all other apps running on OS X. In fact, I still have the older version of Pages on my system, and it still finds the fonts without issue. The specific fonts troubling me at the moment are Myriad Pro Semibold It and Myriad Pro Cond. Pages 5.2 replaces them with Helvetica. I have wasted hours of time trying to resolve this problem, and I am at a total loss. What can I do?

Like so many other thing is is probably gone. Why not use Pages 09 that has about 100 features more than Pages 5. If you haven't deleted it it should still be in Applications/iWork 09 folder.

HT3669 Lexmark Optra E310 not available?

Similar Messages

Maybe you are looking for