HT3702 how can i stop an ongoing payment being taken off my account

We purchased an app that automatically debits my account every week. How can I make it stop

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

Similar Messages

  • All my contact are being copied to my friend's iphone and i also am getting his contacts on my phone,when i delete a contact it also deletes it from his phone,we are sharing the same apple ID. How can i stop our contacts from being shared between us

    All my contact are being copied to my friend's iphone and i also am getting his contacts on my phone,when i delete a contact it also deletes it from his phone,we are sharing the same apple ID. How can i stop our contacts from being shared between us

    Everything that you have checked in your icloud settings will be shared between devices using the same Apple ID.  If you don't want icloud to share that information, then simply turn off that process under settings > icloud

  • How can i stop an email from being sent?  i cannot find an outbox in outlook

    How can I stop an email from being sent.  I cannot find an outbox in Outlook

    Outlook is a Microsoft product, I'd suggest posting on the Office for Mac Product Forums.

  • HT3702 How can I stop and remove my credit card from my iPad ,my children keep buying games and I want to stop it......please help me to remove any payment from now on.

    How can I stop and remove my credit card from my iPad ,my children keep buying games and I want to stop it......please help me to remove any payment from now on.

    iOS: Understanding Restrictions
              http://support.apple.com/kb/HT4213

  • Ipad keeps  coming on and  online, even though I have it shut off and  wifi shut off, why is this and how can I stop it?  After shutting it off,  sometimes   10 minutes,  or hours later it comes back on, even when not using it

    When my Ipad has been disconnected from wifi and  shut off, it keeps  coming back on and online.  It can happen in 10 minutes, or hours later,  happens  irregulary.  Have noticed when it happens, I get nofications  from facebook of  comments and or posts..  I can switch the wifi off,    switch the iPad off and  then set it beside me,  hour later it dings, i have  noficiations of  face book things, and its online again.. why is this and how can I stop it from happening?

    Yes, I went to settings and turned wifi off.  Thought at first I wasnt letting it set for a sec or two before shutting the iPad off.  so now I wait like a minute or two  before shutting the iPad down.  didnt  seem to help.  Tried  actually logging out of  facebook when I was  done with it,  worked for about  4 days, and now it has started  coming on and coming online again,,  I  went through my notifications and  shut things off,   Well  see if it works.  thank you.

  • How can I stop my contacts from being listed twice in my contact list?

    How can I stop contacts in my address book from being listed twice?

    That usually happens if you sync your contacts with both a supported application on your computer and over the air with Exchange or iCloud. You do one or the other, not both at the same time. You need to provide more info in order to suggest a solution.

  • HT3702 How can I just prepay say 500 dollars on my itunes account, so that I dont need to have multiple transactions on my credit card...?

    Hello There! How can I just prepay say 500 dollars on my itunes account, so that I dont need to have multiple transactions on my credit card...? Cheers Dilip

    Hello DilipVenkat,
    Welcome to the Apple Support Communities. If you want to have a purchase iTunes Gift Cards to have credit on your account, just purchase an iTunes Gift Card at your local Apple Online Store or through iTunes. Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/ht2736
    iTunes Store: How to redeem a code
    http://support.apple.com/kb/HT1574
    Regards,
    -Norm G.

  • How can I stop my Apps from being automatically updated on my iPad2?

    How can I stopy my Apps from being automatically updated on my iPad2? I have an extremely slow wi-fi at work and my iPad Apps appear to be frozen as they are waiting to be updated. Help!

    In iTunes use the File menu "Transfer purchases from..." item. Ordinarily you will get a warning to do this before an update. Presumably your computer is authorized to use your account and it is the computer to which you normally sync your iPod?

  • How can I stop Compulations CDs from being broken up into multiple different Albums when imported into Itunes?

    I am currently using Itunes 10.6.1.7.  When I attempt to import my CDs, any that are Compulation Cds (with multiple artists), the CDs aren't being imported into the same folder and are broken into multiple listing in my Itunes library.
    How can change this so that they are imported only by Album?

    I think even using Get Info may not reveal the change, though it is possible the behaviour has altered since I last tested it. Playing or updating the tracks location in a script such as UpdateTagInfo seems to get iTunes to re-evaluate the tag.
    Assuming WMP is involved it may be best to make the necessary settings adjustments to prevent further changes, use the script to get all of the background changes exposed within iTunes, then correct as you see fit. Alternatively I do have another script called ExportImport that could be used to back up the current state of your tags (you should temporarily rename the media folder during the export phase), after which you would then run UpdateTagInfo and then use ExplortImport in its import mode to restore the corrupted data.
    tt2

  • How can I stop sound track from being divided when adding clips to other tracks in PrE12?

    The situation:
    I have a project with several minutes of video clips on the timeline (expert view) in "Video 1/Audio 1."  There is also music on the sound track (below the empty "Narration" track).
    Any time I make an edit to the Video 1 track, PRE cuts the Sound Track.  (Note that this is not the Audio 1 track, it's the sound track which is two tracks away.)  If I insert a clip, the Sound Track is cut and left with a gap.  Same if I do a FreezeFrame insert.  This is bad enough (make ten insertions, have the Sound Track chopped into ten separate pieces), but it gets worse: when I try to slide the Sound Track pieces back together, the Video 1 clips will be moved around.
    This appears to be a major bug but I'm hoping there is a simple way to deal with it.
    Here's what the Manual (p.71) has to say about it (not much).
    "When you insert a clip into the Expert view timeline, adjacent clips on all tracks shift to accommodate the new clip. By shifting all clips together, the audio and video of the existing clips remain in sync."
    * The question here is, adjacent to what?  The Sound Track is a continuous music clip of many minutes; it is alone on the Track, and there is nothing on the track above it (Narration track).  So it's not adjacent to anything, and yet it is being chopped up.
    The Manual continues:
    "Sometimes, you don’t want all clips to shift with each insertion. For example, when you add background music that superimposes the entire movie, you don’t want clips to shift."
    *They got that right, but they don't say anything about how to prevent it.
    This next makes no sense at all:
    "To shift specific clips togather, press the Alt key as you insert.  At a time, you can shift specific clips simultaneously on a maximum of two tracks.  These include the track receiving the insertion and the track containing the linked audio or video (if any). The affected tracks shift together, remaining aligned. The clips on other tracks are unaffected."
    *There is no mention of how to specify what clips would be shifted, or not.
    I'm not dealing with linked clips.  And they tell me how to shift clips (sort of) but nothing about how to stop clips from being cut up and shifted.  This all makes it very hard to create a coordinated product.
    Any suggestions or solutions will be much appreciated.

    Thanks, ATR,
    I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
    UPDATE:
    In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
    1. Put Video on Vid1 track
    2. Put Music on Sound Track
    3. Ran a few seconds of Vid
    4. Stopped Vid, selected Freeze Frame
    5. Held down Ctrl key while clicking "Insert in Movie"  also tried with holding down Alt key.
    Result: a 3 second still was inserted int the Vid1 track.  A corresponding gap was created in the Sound Track.
    6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
    Result: the video following the final Freeze Frame was pushed to the right end of  Video1 track.
    7. Slid the Sound Track all the way to the left.
    Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
    I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
    UPDATE #2
    In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
    1. Locate video in Project Assets
    2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
    Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
    2b.  R click video in Project Assets (pull-down menu appears), push Alt
    Result: pull-down menu disappears as soon as Alt is pushed down.
    I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

  • How can I stop high res photos being pixellated in an In Design Brochure?

    Hi,
    I'm trying to create an In Design Brochure but am finding that many of the photos are pixellated despite being of high res 300 dpi.  Is it better to use photos with a higher or lower resolution that I want to be for example a sixth of A4 on a page?  I can't understand why, as these photos look fine when I've used them in other non Adobe publications previously.  Your help would be most useful.  Should I post this in Photoshop forum?  Thank you

    If you select a bunch of layers in Photoshop, you can right click and make them into a Smart Object.  It differs from using a Group, because the original is always kept in memory, so if you were to make it very very small, and then make it big again, you would not lose quality.  You can do the same thing with a single layer for the same reason.
    To edit a SO, double click it, and it will open in another Photoshop window.  Make your changes, save them, and the original will be updated.
    Photoshop CC 14.2 has added ‘linked SOs’ which are close to a holy grail in Photoshop, because a linked SO can be used in multiple image documents, and they will all update (when next opened) if the master SO is edited.  That is a major new feature and much appreciated.
    Adobe Dynamic Links are similar to the right click you used in InDesign.  Items in a Premiere Pro timeline can be very easily edited in their original, or relevant Adobe application, directly from the PremPro timeline.  This would be Photoshop, Audition, After Effects, Encore…  It’s powerful stuff, and a huge time saver.

  • How can i stop attached photos from being in the email body?

    I try to send pics often to places for printing and icloud puts them into the body of the email instead of as an attachment. THis can be quite annoying. Advice pleas,   Thank Carol

    When sending from your Mac, when composing the email click on Attach.  In the choose file dialoge, try checking the box that says "Send Windows Friendly Attachments".  From you iOS device, this happens automatically.
    The message may still look as if the photo is embedded rather than attached, but on a Windows computer it will appear as an attachment.  (On a Mac it will appear to be embedded but the attachment can be saved by control-clicking on the image.)

  • How can I stop the cursor from being dragged outside the bounds of an intensity graph in LV 7.1?

    Currently, an intensity graph cursor can be dragged outside the graph bounds, and the cursor position continues to change as if the graph had no bounds.

    You can maintain the cursor (and the graph scales...) between defined boundaries programmatically, using an attribute node. Not a very elegant solution, since there is some quivering. See the example.vi.
    Of course, if the user need to modify the scales (zoom in/out...), there will be some additional work ! :-)
    Hope this help.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Bound_cursor.vi ‏51 KB

  • HT204390 voice over is spelling the same word i played on a scrabble game when i put only finger on a word on the app.  I deleted the scrabble free game.  How can I stop the word ""****"  repeatedly being spelled on over my iPad and iPhone

    Taco Pasta Salad Recipe from Metabolic Cookbook:http://tiny.cc/Metabolic Ingredients: 1 package (16 ounces) spiral pasta
    1 pound ground beef
    3/4 cup water
    1 envelope taco seasoning
    2 cups (8 ounces) shredded cheddar cheese
    1 large green pepper, chopped
    1 medium onion, chopped
    1 medium tomato, chopped
    2 cans (2-1/4 ounces each) sliced ripe olives, drained
    1 bottle (16 ounces) Catalina or 16 ounces Western salad dressing
    Directions:
    Cook pasta according to package directions. Meanwhile, in a skillet, cook beef over medium heat until no longer pink; drain. Add water and taco seasoning; simmer, uncovered for 15 minutes.
    Rinse pasta in cold water and drain; place in a large bowl. Add beef mixture, cheese, green pepper, onion, tomato and olives; mix well. Add the dressing and toss to coat.
    Cover and refrigerate for at least 1 hour. 

    Just to close out ... the 'supervisor' was clueless as it turns out.  Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong.  Did he call back?  No ... he just let me go out and find out myself.
    So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
    About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again!  So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
    I got the email, saw 'auto-replace'.  Got the box on the 28th and immediately turned it around.  Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
    Yesterday I grab the box from FedEx and go home to check it out.  As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
    So ...
    - it was NOT my home network.
    - it WAS a hardware issue with the Mini
    - Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
    - non-retail customers ARE treated as second-class by support.
    This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
    For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them.

  • HT1918 how can I stop a reoccurring subscription charge on my itunes account if I don't have access to itunes ?

    I don't have access to a PC or mac with itunes and I am currently using an Android phone. Is there any way to log on through the web?

    Auto-renewing subscriptions can only be managed on a computer's iTunes or on and iOS device (iPad, iPhone, iPod Touch) : http://support.apple.com/kb/HT4098
    If you don't have access to a computer which has iTunes on it then you can try contacting iTunes Support and see if they can do it for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for

  • Can anyone tell me whats going on? Crystal Report Exporting issue

    Hi, I am having a issue with the way that CR exports a report. It was working GREAT until we restarted our server. At which point a 2 page CR exported to a PDF began to display enlarged and over 21 pages. The code never changed and if exporting from

  • Upload download files

    Hi SDN, My reqd is that i want to upload file to the application server and then download the file from <b>webdynpro ABAP.</b> This file can be of any format eq excel,word,pdf..etc file when downloaded also needs to be opened in the same format. ther

  • I want to change my security questions but i forget my answers for my current ones

    i want to change my security questions but i forget my answers for my current ones

  • File lastModified value

    Hi, I was wondering if anyone could point out what im doing wrong here. This is a simple Java program to rename a file. However, the lastModified stamp on the file is not updated when the rename is issued. Why would this be the case? Its running in J

  • String buffer too small

    In order to get they layout of the report the way the end user wanted it (basically embedded tables), I created a function that generates an html table and just call that function during the main report query. For example: select col1, col2, col3,