HT3728 What is the WPA key number and where can I find it?

I need to find my WPA2 key for setting up my Livio Radio. Can anyone tell me how to find the WPA Key

Can anyone tell me how to find the WPA Key
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Express and click Manual Setup
Click the Base Station menu item at uppermost tip top of the screen (up where Help is located)
Click Equivalent Network Password and your "key" will be revealed

Similar Messages

GCF what are the functions of GCF and where can i find that

Hello All,
Can anyone throw some light on what the user expecting..What is GCF what are the functions of GCF and where can i find that
user would like to have the list of customers who have made modification by the GCF (eg modification of the subscription period, the amount, the contract ended ....).
Thanks in advance
Srikanth Ravinutala

Hello Dinakar,
Please read this before closing your old threads.
Read This Before Closing your Threads
Thanks,
Jignesh Mehta

What is a disk serial number and where can I find it on my Mac?

I'm trying to gain access to a Software program that requires a disk serial number to generate a license. Where can I find this information?

Apple Menu > About This Mac > More Info... > Hardware Overview.
See if the Serial Number or the Hardware UUID satisfies their requirements. Both are unique to your Mac.

HT201317 what is the icloud control panel and where do i find it

i just swaped my ipad to a refurbished one and i can not get my photos back on my ipad 2

Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure".

What is Picture Motion Browser (PMB) and where can I find support information?

Solved!
Go to Solution.

PMB is original Sony® software that is supplied with various Sony cameras, camcorders, and digital photo printers. It enables you to manage, view, and edit your recorded pictures and movies on a computer. With its calendar view, you can view your pictures and movies according to the date and time of the recording. You can also print pictures, and attach pictures to e-mail messages.
Support information can be obtained from the PMB Online Help or from the appropriate PMB Web site below.
PMB Web site for North America
PMB Web site for Latin America

What is a "FIN" file and where can I find it?

When I try to open my project a message comes up saying that I need this "menu media-FIN-0000000f" file or the project cannot play properly. It will not even open all the way.
What is this type of file and where can I find it?
Thanks

It is a render file. And what this means is that you exported a reference quicktime of a sequence instead of a self contained QT file, and one of the render files it references has been deleted or gone offline (this happens when a sequence no longer references the file). Only option is to delete the ref QT from your Browser and sequence.
Shane

I want to install on my other computer the "creative suite 6" and I can't find the serial number. For some reason, there is no sticker on the cover of the disc. I think I bought it at 2012. What should Ido?

I want to install on my other computer the "creative suite 6" and I can't find the serial number.
For some reason, there is no sticker on the cover of the disc.
I think I bought it at 2012.
What should Ido?
Hagar

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

What is the WEP or WPA password, and where can I find it?

I just bought an HP dv9013cl with wireless 802.11a/b/g and I am able to connect to my airport, but after it asks for a WEP or WPA password. What is this password and where can I find it. Thanks for the help.
Halfpiper900

Goto Airport Admin Utility, click on CONFIGURE. At the top of the screen that opens, click on PASSWORD, you'll see what looks like a lock. A drop down screen will show the Hex WEP password.
Wayne.

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

Move iTunes from PC to MAC, http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

Im syncing my iphone to itunes because i cant unlock the phone due to water damage so that i can take what is on it and put it on a new phone. how can i ensure that everything was taken from the phone and where can i find it in itunes?

my phone recently suffered water damage so that the screen does not reigster when i slide to unlock. I am sycing the data from the phone onto itunes so i can put it onto a new phone. How can i ensure that i took everything off of the old phone before i restore it and where can i find all of that stuff when i sync with the new phone?

iTunes will only store a back up of the iPhone and you find this by following the steps below:
Windows
Edit>Preferences>Devices
Mac
iTunes>Preferences>Devices
The link below can show you what is stored in an iTunes back up:
iTunes: About iOS backups

So i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

so i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

If the application supported auto-save, yes, if not, then no.
If you were creating a mail message, it might be in the drafts folder of the e-mail program.
What evidence do you have the computer restarted itself? Did the Apple logo come up?

What is the package mzm.stuhjljp and how can I re download it ?

What is the package mzm.stuhjljp and how can I re download it ?
I opened it and a Lion icon went to apps folder, then I deleted the
package folder and package,because I did not recognize what it
was and after I found out I need the whole package stored
someplace else beside my download folder.

Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
    REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
    Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic

What is the '._v1_.swf' cookie and why can't I delete it?

What is the '._v1_.swf' cookie and why can't I remove it?

The '._v1_.swf' cookie is placed by Adobe Flash. When you delete the cookie Flash promptly puts it back. If you uninstall Flash ( https://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html ), the cookie will go away.

Just purchased Mac Book, VERY new to Mac world, "ouch",, I am looking to design my own website,, is there a program built in that will allow this, if so,, what is it called, and where can I find it??? Thanks,

Just purchased Mac Book, VERY new to Mac world, "ouch",, I am looking to design my own website,, is there a program built in that will allow this, if so,, what is it called, and where can I find it??? Thanks,

There are many ways and applications that you can use to build a web site. Which will be best for you will depend on the site you want to build and your level of expertise. Many experienced web developers just use a text editor, often one with specialized features for web programming (BBEdit, for example), but there are programs that can offer additional help, up to and including "drag and drop". Without knowing more about your needs, it's difficult to offer specific advice, but here are some possibilities:
iWeb - came with your Mac. Easy to build but rather limiting in what you can do.
RapidWeaver - more flexible and capable than iWeb but harder to use; sort of an "inbetweener" application
Dreamweaver - powerful but expensive and a steep learning curve
There are of course a number of other options. If you can provide more detail about what you wish to build and your level of experience, someone can probably make more targeted recommendations.
Regards.

The InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and where can I find a description of this function?

the InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and what does she do?and where can I find a description of this function? Can i use this function with visualc++ 6.0?

The InitCVIRTE function is in the CVI run time engine (cvirte.dll)..not part of NI-DAQ.
Applications written or using CVI may call this function..
How are you running into this ?
From the CVI help...
This function performs initialization of the CVI Run-Time Engine. It is needed only in executables or DLLs that are linked using an external compiler. Otherwise, it is harmless.
It should be called in your main, WinMain, or DllMain, function. The parameter values you should pass depend on which of these three functions you are calling InitCVIRTE from. The following examples show how to use InitCVIRTE in each case.
If you are using main, your code should be as follows.
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are using WinMain, your code should be as follows.
int __stdcall WinMain (HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpszCmdLine,
int nCmdShow)
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are creating a DLL, you must call InitCVIRTE and CloseCVIRTE in your DllMain function, as in the following.
int __stdcall DllMain (void *hinstDLL, int fdwReason,
void *lpvReserved)
if (fdwReason == DLL_PROCESS_ATTACH)
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
/* your other ATTACH code */
else if (fdwReason == DLL_PROCESS_DETACH)
/* your other DETACH code */
CloseCVIRTE ();
return 1;
NOTE: The prototype for InitCVIRTE is in cvirte.h, not
utility.h.
NOTE: In CVI 4.0.1, this function was expanded from one to
three parameters. Executables and DLLs that were
created using the one-parameter version of the function
will continue to work properly.
/*-------------------- Prototype ---------------------*/
int InitCVIRTE (void *HInstance, char *Argv[], void *Reserved);
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

HT3728 What is the WPA key number and where can I find it?

Similar Messages

Maybe you are looking for