HT3986 WHO IN BREMERTON/TACOMA WA AREA CAN INSTALL WINDOWS 7 AND BOOT CAMP FOR ME??

I purchased a Brand New 27" Imac in January with the 3tb fusion hard drive and I am looking for someone to help me install BootCamp5 and Windows 7.0 Professional.
I live in the Silverdale/Bremerton Washington are area. I can drive to Tacoma or Seattle if needed.
Thanks
Drew Painter

Contact a local AASP for that, this is a user forum and does not offer paid services.

Similar Messages

  • I can not use my mouse or keyboard when I am trying to install windows via boot camp

    Please can you help!
    I can not use my mouse or keyboard when I am trying to install windows via boot camp

    Starting a couple of days ago my mouse and keyboard stopped working suddenly.  
    How are they connected?   In my case they are wireless and their receiver is plugged into my USB hub.  After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it.  My fix was to
    plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.)  Once I had normal access into my machine again I used Device Manager to remove all USB controller and
    hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going.  Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized. 
    If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK.  I have no idea why updates have such a catastrophic effect for USB devices.
    Robert Aldwinckle

  • Can I partition my external hard drive so that one partition is for Time Machine and the other is to install Windows with Boot Camp?

    I have a Seagate FreeAgent GoFlex 1TB USB 3.0 external hard drive that I currently use just for Time Machine backups.  Is it possible for me to go into Disk Utility and create a new partition on the drive so that I may install Windows 7 via Boot Camp? Or since I am already using it for Time Machine do I have to keep it only for Time Machine?

    You must install Boot Camp in your internal drive because Windows can't be installed in an external disk and Boot Camp can't do that

  • Why can't I start Mac after installing Windows using boot camp???

    I'm new to Mac.... Have installed Windows 7 through Bootcamp... Well, I tried to at least!!  I can now only get into Windows every time I start the mac up.... What have I done wrong - and how do I fix it!?!

    Flying kiwis wrote:
    Thanks Vinmar.... I can't see anything down on the bottom fit of my screen, apart from the time, date, connectivity, speaker volume etc. am I looking in the wrong place??
    The restart in Mac OS X icon (a grey diamond) will only appear after you've installed the Boot Camp drivers. If you installed the drivers, try clicking on the sideways triangle to show any hidden system tray icons.  You can also use the boot camp control panel to restart in Mac OS X.
    For how many partitions you have, you should be able to see those in the Disk Utility application in Mac OS X or the Disk Management app in Windows.  Be careful not to delete any of them.  If you want to remove a partition, I'd use the Boot Camp Utility to do that.  Nore as well that OS X 10.7 and above add a hidden recovery partition to your drive that you won't see in Disk Utility but will see in the Windows app. 
    Hope this helps.
    Cheers,
    Vinmar

  • Can't partition during Boot Camp for Windows 8?

    I am trying to install Windows 8 on my early/mid-2011 MacBook Pro. I am using the Boot Camp Installation & Setup Guide, but when I get to the area of partitioning the hard drive, I am choosing around 60GB and clicking next. After a minute or so, it is telling me that this drive cannot be partitioned?
    I am not as savvy on the Mac as PC (switched from the Dark Side in early 2011), so I was wondering if the MacBook hard drive needs degragmented so that

    jak9498 wrote:
    I am trying to install Windows 8 on my early/mid-2011 MacBook Pro. I am using the Boot Camp Installation & Setup Guide, but when I get to the area of partitioning the hard drive, I am choosing around 60GB and clicking next. After a minute or so, it is telling me that this drive cannot be partitioned?
    Backup your user data files off the machine to a storage drive (not only TimeMachine as it might fail to restore) and disconnect everything else.
    Reboot the computer and hold command option r keys down (wired or built in keyboard) on a Ethernet conection to your router or modem (power off/on modem to reset) use Disk Utility there to Repair your internal drive.
    Reboot the machine normally.
    Use Disk Utility and select the internal Macintosh HD partition, then click Erase Free Space (Zero) and move the slider one space to the right and Erase. You can't erase the entire Macintosh HD while booted from it, so your data is safe, this will only erase the FREE space. This will take some time so let it complete.
    Next head to BootCamp and attempt to partition again, if it fails, then see this User Tip of mine to shift OS X data up.
    BootCamp: "This disc can not be partitioned/impossible to move files."
    If your still having problems, it's likely a bad drive and or a gltich in the 10.8.3
    ..Step by Step to fix your Mac

  • Can't Install Windows in Boot Camp - Windows Driver Issue

    Before update to Mavericks, I had an installation of WIndows 7 running in Bootcamp.  I had updated this to Windows 8.
    Just prior to Mavericks release, the hard drive in my MacBook Pro started to fail.  I had a full backup of the OS X partitiion, but did not have one of Windows.
    After the drive was replaced, I did a fresh install of Mavericks and I'm planning on doing new installs of my apps over the coming days.  (It's an opportunity to clear-out remains of old apps/OS's.)  I have hit a wall with Boot Camp, though:
    I used the Boot Camp Assistant to download the driver sets ("Windows support software")  to a USB stick and partition the HD. However, although the Mac then boots off the Windows 8 (64-bit) installer DVD I can only get as far as choosing the installation language before I get stuck on the next step where it's looking for missing drivers.  At first, I thought this was some reference to the ones downloaded from Apple, but I am now pretty certain that these just get installed after [in] Windows to allow access to the Apple hardware.
    I have tried installing Windows 7 and get hung-up at the same point (which did not happen on 10.8).
    Does anyone have any insight into what's happening and how I can get around the problem please?

    Just chiming in - having the same issue as Bernard and Ian here myself, but with Windows 7 Ultimate 64 bit.  Trying to install on MBP Late 2013, Mavericks, using USB.  I get through the bootcamp phase to the language selection in Windows and then get the drivers error message.
    Called apple tech support and they indicated that OEMs can sometimes be lightweight versions of the DVD installers (i.e. they leave out certain drivers because they assume a certain set of hardware components will be present, typically hardware that perhaps only PCs have and Macs don't) - so they suggested trying to get my hands on a retail version of the ISO file that might have all of the drivers necessary.  I tried downloading every feasible iteration of the windows trial ISOs here but every one of them gave me the same error message in Windows setup.  My next step is to call microsoft to ask them for a "complete" ISO - I'm hoping they can cooperate since I do have a valid, un-used authentication code for my Windows product.  I'll let you know if this works.
    In the meantime - has anyone found an easier fix?

  • Can't install Windows with Boot Camp. Cannot Verify/Repair HD drive, fails.

    Here's what it says when I click on Verify Disk:
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/iPodUpdater.framework/Versions/A/C odeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/DeviceLink.framework/Versions/A/CodeResources ", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iTunesAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
    ACL found but not expected on "Applications/Utilities".
    ACL found but not expected on "Applications".
    ACL found but not expected on "Library".
    Permissions repair complete
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    Invalid volume file count
    (It should be 618142 instead of 618143)
    Invalid volume directory count
    (It should be 160288 instead of 160287)
    The volume Macintosh HD needs to be repaired.
    Error: Filesystem verify or repair failed.

    "...so I don't think he has the discs still."
    Have him call AppleCare and get a new set. If his system goes south that's the only way he can do repairs, check his hardware or reinstall a new OS. Those disks are gold. (not really gold, just a metaphor).

  • I can't Install windows via Boot Camp Assistant please Help!

    My superdrive damaged so i use external dvd-rw. Boot camp assistant shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution.

    Also, If you have a Mac which is a UEFI model, and not in the list as shown by the BC Info.plist file, then a direct UEFI install of Windows 8 (not Windows 7) is possible and works very well.

  • I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

    I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
    I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint)  I need to use (duh).  I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.).  The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
    Anybody who can help will become my new best friend. Thanking you.
    Message was edited by: Marmadukemark
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : Mark-PC
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Bluetooth Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
       Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
       Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Local Area Connection:
    I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
       Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 348662292
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Wireless LAN adapter Wireless Network Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
       Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft 6to4 Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    Are you using a MacBook Pro? Is everything installed on the same drive?
    I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
    Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
    Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

  • I have a Macbook pro with Retina Display, and need to get bootcamp. Which one should I get so I can install Windows 7?

    I have to have windows so I can use CAD and photoshop for my classes. Any suggestions?

    Boot Camp Assistant is in your Utilities folder. You will have to purchase Windows somewhere. Preferred would be 64-bit Windows 7.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Enabling 'File Sharing' on my Mac allows my Macintosh HD and Boot Camp to be visible and writeable on my home network. How can I turn this off, so that only folders/files I share are visible?

    So I've been trying recently to get my MacBook Pro connected to my home network. There are two other desktop computers in the household, and I'd like to be able to connect to their shared folders, as well as allow them to access shared items on my MacBook Pro. I think I've read all the documentation regarding this issue on the Apple Support site. I do have administrator privileges on my Windows 7 computer.
    Issues connecting from PC to Mac
    A couple of days ago, I enabled SMB File Sharing on my MacBook Pro, and in addition to the already shared Public folder, I added another that resides within Movies. Then I went to my Windows 7 PC, and under Network, my MacBook Pro appeared. I double-clicked on it (I cannot remember if I was asked to enter my Mac user credentials; I think I was), and I saw the two shared folders: Public, and the Movies folder.
    However, today I went back to my Windows 7 PC, accessed my MacBook Pro, entered username and password, and in addition to the two shared folders, both my Macintosh HD and Boot Camp HD appeared as shared folders, both fully writable. However, under File Sharing on my MacBook Pro, only the two shared folders (Public and Movies) appear in the Shared Folders list.
    How can I prevent my Mac from sharing my entire partitions? How can I configure it so thatonly the folders I select to share are actually broadcasted across my home network? Also, it would be ideal if I can access these shared folders from my Windows 7 PC without having to enter my Mac user credentials.
    Issues connecting from Mac to PC
    I have a user account on my Windows 7 PC with the same name as my Mac, but with no password. When I try to connect to my PC from my Mac, the enter credentials dialogue pops up and asks me to either log-in as a Guest, or enter my User credentials.
    The Guest account is disabled on Windows 7, and I assume that's I'm not able to log in as Guest (if it is possible to connect as a Guest without having to enable the Guest account on Windows 7, please let me know). Leaving the password field blank on the enter credentials dialogue tells me that it's incorrect (even though I don't have a password on my Windows 7 account).
    Is it possible to access shared files and folders on my Windows 7 PC from my Mac without having to create a password protected account? If not, is it possible to create a password for the sake of accessing shared files, while not requiring it to log in to the account? I'm sorry, I know this last bit more falls under the category of Windows Help.

    Sharing files from a Mac to a PC is a different animal.  I've never done it myself so you may want to repost a separate question on this topic.
    From what I understand, in order to access files from a Mac on a PC, you must log in using your Mac username and password (no anonymous file sharing).  Since this is not very desirable from a security standpoint, Apple recommends creating a separate user account on the Mac that is dedicated to file sharing.  Give that account access only to the files/folders you want to share.  You can then give that user account name and password to your Windows users.

  • How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

    how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

    My carrier is Sprint. But I actually have checked with others and theirs work fine.

  • How can I get Windows 7 Boot Camp to find my Magic Mouse?

    Hey!
    So I just bought a Magic Mouse and it works flawlessly in OS X.
    But when I use Windows 7 Boot Camp I can't find the mouse to add it as a new device. My bluetooth works just fine and I have the Boot Camp 3.3 drivers.
    I tried rebooting, turning the mouse off and on, read a bunch of guides on the internet but no one is having issues CONNECTING the mouse, only getting it to work, so my research is proving to be hard.
    Can you guys help me?
    Thanks!

    Hi Maia,
    Can you please mention your MAC model (MBA 2011, MBP, iMac?). Which OS X version?. Have you problems pairing other bluetooth devices?
    You may want to try the following setps.
    1.- First make sure that you have the latest EFI and software updates. Including latest bootcamp bluetooth drivers.
    2.- Unpair MM in Mac OSX
    3.- Do a Nvram and SMC reset:
    http://support.apple.com/kb/ht1379
    4.- Restart
    5.- Pair your MM under Mac OSX
    6.- Boot on Bootcamp assiging bootcamp as a starting partition
    7.- Add your device.
    Let me know if that worked, there are another tricks you can try but I need additional information.

  • How can I download Boot Camp for Tiger

    Hello I cannot find anymore ways to download Boot Camp for Tiger not for Leopard because I don't have that kind of Operating system. It's kind of expensive.
    If you have any advice or links, please tell me..
    Thanks.
    Shang

    Shangqi wrote:
    Hello I cannot find anymore ways to download Boot Camp for Tiger not for Leopard because I don't have that kind of Operating system. It's kind of expensive.
    If you have any advice or links, please tell me..
    Apple discontinued BootCamp beta last year. They have all expired and no longer work.
    It was a beta program.
    You need to purchase Leopard in order to install BootCamp and get the updates.
    You can also install Winders without BootCamp using a virtual program like Parallels or using the free bootmanager, rEFIt. Either of these will allow you to install Winders, Linux or any other OSs on your HD, but you are on your own if you take that route.
    The only support path is using Leopard.

  • What are the delta mechanisms and tables used for  Lo Extraction & COPA

    Hi all
    what are the delta mechanisms and tables used for  Lo Extraction & COPA.
    please explain clealry.
    Thanks & Regards,
    James

    James,
    Please go through Roberto's weblog :
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    Anyways,
    As you know LO cockpit consists of different modules(MM, PP, SD, etc)
    They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
    coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
    Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
    Assign points if helpful
    Kalyan

Maybe you are looking for

  • Verizon is Capping Internet Speed/Service for "Unlimited" Customers

    Some recent news has been brought to my attention by Verizon Wireless' customer service department, and I think that given the severity of Verizon Wireless’ continued breach of contract to Internet customers, this matter should be brought to everyone

  • H67MA-E35 (B3) emitting high-pitched whine/chirp

    I am getting a high-pitched whine or chip coming from the bottom left area of the CPU/Heatsink. It isn't the fan, as I have stopped the fan and it still makes the noise. I was also able to correlate the vcore voltage with the noise. The noise is only

  • Has anyone downloaded 'pdf converter pro' for windows 8?

    Files don't open to allow editing, marking,etc

  • Importing Tables from Word Documents

    I have a new job where the majority of my colleagues are PC users and we must work on common documents. I have no problem saving documents as a word file and opening word documents. But I have had some issues with Tables coming from a word document.

  • Data drive for mac pro

    I want to put in another hard drive in my mac pro. Can I use the existing hard drive for applications, and the new drive for data storage? Do I just drag the documents folder, and itunes library to the new drive?