HT4623 How do I get the calendar to show the whole month and not just the day or week.

How do I get the calendar on my updated i phone 7 to show the whole month and not just the week or the day?

Touch the arrow (or word) at upper left (e.g. September).

Similar Messages

  • Why does my back arrow close out the whole site and not just the one page?

    I just replaced my old MacbookPro with a new one.  The one difference that is driving me crazy is that the back arrow (button) closes the whole site, not just the page that I am on.  Is there a way to change this.  My old computer just sent me back to the previous page.  Thanks in advance!
    Cindy

    Red buttons, back buttons, I guess specifics matter.
    Glad you figured it out.

  • How do it get my app to show up with message and mail when the user press "share contact" on the iPhone

    Hi Everyone
    Would like to check if it is possible to let my app show up togather with message and mail app when the user clicks on "share contact" from their contact edit.
    Thanks in advance.

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    See also:
    * http://kb.mozillazine.org/Toolbar_customization

  • How do I get a chart execute on a FUNCTION/PROCEDURE and not just on  query

    So I have the following function. It does return a SQL statement which should populate a stack bar chart:
    create or replace FUNCTION stacked_repair
    RETURN VARCHAR2
    is
    l_var VARCHAR2(32767);
    BEGIN
    l_var := 'SELECT NULL LINK,to_char(open_time,"YYYY-Q") DATIME,';
    for r1 in (
    SELECT DISTINCT DECODE(REPAIR_TYPE,'DEPARTMENT PURCHASE','DEPARTMENT','USER OWNED','USER OWNED','BCCR','BCCR','','NO ENTRY') ||'-'|| DECODE(HARDWARE_WARRANTY_STATUS,'YES','WARRANTY','NO','NON-WARRANTY','UNKNOWN','UNKNOWN','','N/A') as STATE
    from
    SMINCREQ
    where
    (ASSIGNMENT = 'HARDWARE REPAIR' or ASSIGNMENT = 'CONTRACTED HARDWARE REPAIR') and (HW_HARDWARE_TYPE_BC='LAPTOP' OR HW_HARDWARE_TYPE_BC='DESKTOP') and open_time>'7/1/2011')
    LOOP
    l_var := l_var || 'sum(decode(state,''' || r1.state || ''',"1",0)) ' ||'"'|| r1.state || '",';
    END LOOP;
    l_var := rtrim(l_var, ',');
    l_var := l_var || ' FROM SMINCREQ GROUP BY to_char(open_time,"YYYY-Q") order by to_char(open_time,"YYYY-Q")';
    RETURN l_var;
    END;
    When I call though
    SELECT stacked_repair from DUAL;
    I get the error:
    ORA-06550: line 1, column 45: PLS-00428: an INTO clause is expected in this SELECT statement
    Im' completely lost of this. I need it though because my decode statements can grow and shrink depending on the amount of categories I have.
    So how do I get the data to fill the chart from the function back into the chart???
    Thanks
    Edited by: bostonmacosx on Jul 2, 2012 12:08 PM

    Your function stacked_repair is a single row function, which means you will only get one value returned - just like calling sysdate.
    So you would need to assign it to a variable preferably using
    l_my_value := stacked_repair;or extending your technique
    select stacked_repair
    into l_my_value
    from dual;I don't really have enough context to work out how you want to turn this into a stack bar chart.
    Actually, looking at your code, you are constructing some SQL? In that case you just need to place this in your chart source
    return stacked_repair;Scott

  • What is the easiest way to access information on my iMac when on my Air? Is there a way to connect to the whole computer, and not just the public folder?

    When I'm working on my laptop downstairs (or at a local coffeeshop, or when traveling), I'd love to be able to grab files that are on my iMac back home. (without relying on using Dropbox or similar...)
    Thanks!

    OS X: Using and troubleshooting Back to My Mac with your iCloud account

  • How do I get a calendar to show on the side bar if it no longer appears there?

    How do I get a calendar to show on the side bar it has disappeared?

    I had a calendar on the side bar that kept track of my daily exercise. One day it was no longer on iCal. Can I get it back somehow?

  • HT5622 how do we get all emails on to both our pc and iphone ,at the moment it is either / or ?

    how do we get all emails on to both our pc and iphone ,at the moment it is either/or ?

    DO you have an IMAP mail account, or is it POP?
    POP is designed to be accessed from one computer.
    IMAP is designed to o what you want.

  • HT203433 how do I get my ipod to recognize audiobooks as books and not music

    how do I get my ipod to recognize audiobooks as books and not music

    Well it was only one Slot Machine app that was working but that is not working either now.  I have to ask my son about the firewall port blocking, but I don't think so, or if it does that's not the problem as the iPod worked fine the first day and then it stopped all of a sudden.  Most of the apps I have on the phone are companions to the online game about farming and fighting and building towns.  The rest are slot machines. 
    Thanks for replying, appriciate any help.

  • How can I transfer photos from my  iMac to my iPad and not lose the ones already stored on the iPad.

    How can I transfer photos from my  iMac to my iPad and not lose the ones already stored on the iPad?  When using iTunes to sync a folder from the iMac to the iPad it always removes anything previously synced.
    Help appreciated
    David

    I've just found out the reason for this behaviour. I am syncing from a computer which is different to the one I first synced with. iTunes can't cope with this situation so deletes anything synced from another source.

  • How do i get my contacts to show up because they will not show up when i go to my contacts

    How do i get my contacts to show up because they will not show up when i go to my contacts?

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

  • Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Did you move to iOS 8 via iTunes?  Your photos should all be on your iPhone 5s without any issues even if you updated via WiFi.  The update should have no impact on your photos other than to have moved any photos in your former Camera Roll to your Photos.  When opening the Photo App you should see Photos and Albums available at the bottom of the screen.  You can also look at Settings>General>About and looking down the list your should see the word Photos and a Count at the right.  This count should represent all of the photos in your iPhone.

  • CAN I ENLARGE THE SIZE OF ALL TRACKS AND NOT JUST THE ONE TRACK AT A TIME

    I would like to enlarge the tracks on the top half of the mix screen and not just the one track I'm working on. I find that most times I'm working in 2 or 3 tracks only and it would be great if I could enlarge the size of those to work with rather than the thin tracks they appear as. I realize if I click on one that it will appear larger below to edit but can I have all the tracks recorded appear larger?
    [email protected]
    Ross

    NO

  • HT4623 How come my ipod only updates to ios 6.1.6 and not a iso 7 or 8?

    How come my ipod only updates to ios 6.1.6 and not an ios 7 or 8?

    Because iOS 7 requires 512MB of RAM and iOS 8 requires a dual-core processor. Your device doesn't have either of those.
    (118885)

  • Captivate 8 print widget does not print in landscape; prints full resolution of project and not just the certificate?

    I am new to Captivate and am tasked with learning how to use Captivate 8.  I need to add a certificate of completion to the end of my project and have many questions for which I cannot find any answers! Please, if anyone can answer these:
    1) I do not want the certificate to be printed until the score of the quiz reaches a specific minimum - for example, you need a score of 80% or better to print a certificate.  How do I do this with the print widget?
    2) I want the certificate to print out without the slide background and without the project's resolution - in other words, I only want the certificate image (with added text box for name) to print, IN LANDSCAPE, without the user having to make all the adjustments on their end (choosing landscape over portrait with their printer).  How is this accomplised?
    3) I want a date entered on the certificate - how do I add this specific element? 
    Without a certificate widget and the use of Flash with this version, I am confused as to how exactly Captivate provides the ability to print certificates?  I do not know HTML5, and am spotty with Javascript.  Why would a feature such as certificates and the ability to print them be such a clandestine thing?  No tutorials, no clear advice on how exactly to achieve this widely popular feature of training material development.  Seems to me that it should be MUCH easier to accomplish, but I'm stumped at this point.

    The solution I found is this: 
    Don't use the print widget in Captivate 8. It simply does not work the way it should be able to work.  Unless you are capable of scripting in Actionscript 2.0 and have access to an older version of Captivate, there is no way to get around this bug. 
    The problem I discovered is that Captivate 8 will only allow you to use Actionscript 3.0 in Flash; you can open the widget in Flash, but you MUST open it through Captivate first if you intend to use it in Captivate.  So, once you open the widget for adjustments through Captivate, it automatically chooses AS 3.0 as the scripting language to use, no other choice is available.  IF you have Captivate 7 or lower, however, it allows you to script in AS 2.0.  I do not, so I cannot assist you in scripting the widget.
    What I ended up doing was, I made my own certifcate in Photoshop, saved it as a .PNG, and added it to the last page. Using the internal coding of Captivate I told the program to only go to that slide upon success of the quiz. 
    To Print:  go to Window > Skin Editor.  On the left are check boxes for playbar choices - check off 'Show Playback Control,' and then choose your theme. From the dropdown, choose "print."  If you don't want anything else on the playbar, then check those items off; Choose where you want the playbar to show (I chose bottom and bottom center). See below:
    You can see the icons on the bottom, in the center.  The icon to the left is the Print button.  This works well, though you may have to make print choices from your local print dialog.  I have to tell it to print landscape, for instance, otherwise it prints portait and too small.  But this does work, and it solves the issue of non-working print widgets.

  • Why Has Adobe Removed The Option For Individuals To Purchase Software And Not Use The Cloud?

    As an individual who has been using Adobe products for about 25 years for my personal use and not as a business, I find the new policy of "renting" the software and using "The Cloud" for, at least in my case, a prohibitive monthly fee, to be totally unacceptable and will result in my no longer being able to afford using Adobe products.   I do not understand why Adobe cannot offer their new cloud program for individuals and companies that may wish to use the new system and have the resources to pay in perpertuity, but they should also have the option for those of us who would rather purchase upgrades for whatever programs we use and keep them on our computer without "The Cloud" service.
    I am 67 years old and living on a fixed income.  I basically use four adobe programs... Photoshop, Premiere, After Effects, and Audition as I do volunteer work at a local non-profit radio and tv organization.  If I were to "rent" those individually it would cost $80 per month... so I could take the next deal and get access to all software for $50 per month... I cannot afford either of those.  If I could upgrade one or more of the  programs every two or three years... keeping them on my computer and not using "The Cloud," then continuing to use the products would be doable.  However, being forced into a program that requires a monthly fee and use of "The Cloud" which I do not need to use, seems totally unfair.   I certainly understand that there are  businesses and individuals who will love the new program, but why not have the option?  Or perhaps a "Senior" discount as you do for educators and students?
    Something to think about.  It seems Adobe may be moving to the "Cable Television" model of monthly fees that will go no where but up.

    Hey there, you may have heard that Adobe is continuing to sell and support CS6 for customers who prefer traditional licensing.  It's last year's version instead of the latest-and-greatest CC release, but it's something to consider if that's important to you.
    As far as a "senior discount" on Adobe software, there has never been one – but one thing to consider is becoming a student or teacher because there is no age restriction on that, in which case you may become eligible for education discounts.
    Hope this helps.

Maybe you are looking for