HT4623 I installed OS 7 to my IPad 5 today and added a passcode. Now when I try to enter the passcode, I get locked out. What can I do?
I cannot acces my Ipad. After I enter my passcode, I am locked out. I did install OS 7 today.
To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates
Similar Messages
-
I have an iPad that is stuck in recovery mode. When I try to restore the firmware, I get an unknown error occured (1611). Does anybody have a solution for this?
There is a way to get it recovered from the so called DFU mode. Try to restart the phone while holding the home and power button at the same time. Then try to connect it to iTunes and do the same again. If you try that again till it works you should be able to use your iPhone as before.
-
Problem signature:
Problem Event Name: BEX
Application Name: firefox.exe
Application Version: 33.0.0.5397
Application Timestamp: 54392479
Fault Module Name: nsib.dll
Fault Module Version: 5.1.3.2
Fault Module Timestamp: 53fdad24
Exception Offset: 001360a0
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 13a8
Additional Information 2: 13a84480b0d9c766a5e4c95aa1171a8d
Additional Information 3: 13a8
Additional Information 4: 13a84480b0d9c766a5e4c95aa1171a8dDo a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library? How do I sync with the newly installed iTunes without losing all of my data on my ipad?
Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.
Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum -
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I downloaded and installed Illustrator CS6 in Feb, 2014. Now, when I try to open the program it is asking me to sign in for a trial use. What happened to my software and how can I reinstall it?
CS6 or Creative Cloud Reverts to Trial Mode
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html -
Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3. I have trashed the CUDA program and reinstalled Premiere and AE but no joy. Same message followed by another error box with options to Retry, Send to Apple or ignore. I have tried all 3 options but nothing works! Every time I launch either program same message appears.
Hi? today i too have this problem.
I found a solution here: https://discussions.apple.com/message/25137524#25137524
Now all good.
Good luck! -
I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4
WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/ -
HT4097 I did a reset on my iPad now it will not accept my pass ode and I'm locked out what can I do
I did a restore on my iPad I was trying to take a screen shot but did something wrong I was following a manual app anyway it turned out I preformed a reset by pushing the off button and front control button together as a result it re set it self and now it won't accept my passcode and I'm locked out what can I do can't get to apple shop as on holiday in austria
If you can't unlock the device because it will not accept the passcode, there is only one thing you can do.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You may have to use recovery mode if that didn't work.
http://support.apple.com/kb/ht4097
BUT .... Just for the heck of it, reboot the device before you resort to restoring and see if ithe passcode will work.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Need help please I just bought this iPad today and I factory reset it and then I plugged into my laptop and downloaded the latest software I went and purchased a app store card and a iTunes card but when I try to download apps it won't let me if anyone can help with this problem it would be greatly appreciated. Thanks in advance. Antawn
Hello Tntingey,
The gift card you've given your father must be redeemed via the steps below.
Redeeming iTunes Gift Cards and content codes
http://support.apple.com/en-us/HT201209
Cheers,
Allen -
The installer for iTunes free download says when installing "The installer encountered an error that caused the installation to fail." I have been to the help page and run Disk Utility (not sure if that's worked or not) and it still comes up with this. Please help me get iTunes back up and running. Thanks
Go to HD>Library>Receipts - remove the iTunesX.pkg receipt. Drag the iTunes app to the trash.
Repair permissions with Disk Utility - reboot - then try to run the installer.
MJ -
I had to erase my hard drive and reinstall ox snow leopard. when i try to sync my Iphone or Ipad it says that my device was synced with another computer and I will loose my songs on the Iphone or ipad and it will be replaced by the library that is on my computer now. The library is empty since I had to erase the hard drive. Can anyone help?
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone/iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone/iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
I have a presentation in my Keynote app on my iPad when I try to open it on my MacBook Air I get a message I must update Keynote. When I try to update Keynote app I am told MacBook software must be updated but MacBook software updater says it's up to date.
RichlandBruce wrote:
When I try to update Keynote app I am told MacBook software must be updated but MacBook software updater says it's up to date.
Yes your MBA is up to date as far as Lion is concerned... But Keynote requires you Upgrade to Mavericks
Keynote for Mac = Compatibility: OS X 10.9 or later
From https://itunes.apple.com/app/keynote/id409183694?mt=12&ls=1
MAVERICKS... http://www.apple.com/osx/how-to-upgrade/
Question: How much RAM is in your MBA ? -
I updated my iPad os and now my iBooks app automatically closes as soon as I enter and none of my books are on it.
Do a hard reset ie hold the power and home buttons simultaneously until the Apple logo appears (ignore the red slider).
Maybe you are looking for
-
Has Cisco announced a release date for ISE 1.2.1?
We are anxiously awaiting it to fix bug CSCuj88888. Thanks.
-
I am unable to install Shockwave, I have Flash is that good enough for movies & games?
Hi everybody. Can you tell I am new at this computer stuff. So, it is not easy for me to ask my question. But I just got this new lab top for Christmas and I want to make sure everything is in working order. I stumbled upon some tips for setting up y
-
Problems to install the time capsule
Hey everyone, I really need your all help! I bought a time capsule and now I want to install it at my macbook pro. But everytime I try this I cant. It shows that I cannot install the time capsule at the macintosh hd 10.9.1!! And that the Mac OS X ver
-
Tablesorter null pointer exception
I have table dynamically updating from network, but when ever I read data into table it gave me exception as same as this forum. I try to look out for answer but so far every expert seem to live with it. here the link http://forum.java.sun.com/thread
-
Cloud disappeared from computer
I reset my password-and now Creative Cloud is removed from the computer- plus it will not allow the CC to download- Im current on payment whats the deal?