HT5085 how can i know how much of the content of my library will be added to iTunes Match, and if some of it will be left out??

I mean... I don't wan to start paying a service, to find out later, that half of my library doesn't match or something like that and will be left out. I've never bought a single song from iTunes (maybe just a couple...) all my music was added from imported CD's or downloaded and added to iTunes from the internet, so I'm afraid most of it won't will be matched or recognized by iTunes...
If somebody knows a way to "test" your library to find out how much of it is compatible with iTunes, i will be very thankfull.

I didn't say "re-create" I said "restore from a backup." Restoring from a backup will place all the files just as they were right back where they need to be. This includes the .itl, .itdb ad .xml files iTunes needs to recognize that the files on the internal HDD are the same as the files in the cloud.
You do have a backup, don't you? If you don't then I strongly recommend you start backing up immediately.
If all else fails you can email iTunes Store support and ask them to reset your iTunes Match DB on the server. This will require your iTunes to go through the entire scan, match and upload process as if it were the first time.

Similar Messages

  • How can i know how to redeem the code? how can i get this code?

    how can i know how to redeem the code? how can i get this code? please i need you help
    <Email Edited by Host>

    You are trying to create a new Apple ID? You don't have one yet? Is that correct?
    If so, then see this article on how to creat your Apple ID - and make up a password for it. Remember to write it down immediately.
    http://support.apple.com/en-us/HT203993

  • How can I know how many processors do I need for a new SQL Server machine?

    My company intend to buy a new server and will dedicate that for SQL Server which will serve an in-house developed application.
    How can we know how many processors are enough to buy?
    I know that each SQL Server edition and version has it's different limitation of the number of processors it can support, for example SQL Server 2012 Standard Edition can support up to 4 sockets or 16 cores per SQL Server Instance, but this does not mean
    that I have to buy 4 physical CPUs. two could be enough. how can I know? 

    How can we know how many processors are enough to buy?
    I know that each SQL Server edition and version has it's different limitation of the number of processors it can support, for example SQL Server 2012 Standard Edition can support up to 4 sockets or 16 cores per SQL Server Instance, but this does not mean
    that I have to buy 4 physical CPUs. two could be enough. how can I know? 
    This is off topic question how can we answer it. We even dont have any knowledge about your application.
    Please speak to licensing specialist about servers and cores below link will give you more information.
    https://msdn.microsoft.com/en-us/library/ms143760.aspx?f=255&MSPPError=-2147217396
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • How can I know how many people subscribded to my podcast ?

    How can I know how many people subscribded to my podcast ?
    Is there a tool or something ?
    See ya !!
    Steph

    This depends on where you have your podcast hosted. Some ISPs provide logs of access to pages and downloads: if your podcast is embedded in a web page then some ISPs provide facilites for a hits counter (though this wouldn't necessarily show how many people had bothered to listen to it).
    However if your podcast is hosted on .Mac then there are no such facilities provided, and it's not something you can do from your end, it would have to be on the server. Similarly the iTunes store doesn't provide any way of tracking subscribers.

  • How can i know how many visitors are online now?

    i'm making an application like forum...
    but what i cant do,, is how can i know how many persons are viewing my forum (members, and guests)???

    It's not possible to know with absolute certainty because HTTP is a stateless protocol.
    The HttpSession object, however, gives you a lot of information that can bring you pretty close.
    On my site, I have a sample application that uses filters and a context scoped map to track user information and make it available to an admin servlet.
    It shows the user's name, IP, session number, how long they've been on, how long it's been since the last time they've hit the site, how long before their session expires (if they don't hit the site again), and what page they were on last.
    You can download this app at:
    http://simple.souther.us
    Look for SessionMonitor.

  • How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

  • I have monthly subscription app how can i know about who cancel the supscription ?

    i have monthly subscription app how can i know about who cancel subscription ? and how i can calculed the monthly revenue ?

    Apple20141 wrote:
    Or open sim tray and find out the carrier ring the carrier and give them numbers on sim
    The carrier will not give out information about the owner of the phone.

  • How can I know how many Itabs are active

    Hi Experts,
    How can I know all the ITABS that are active during DEBUGGING?
    I AM USING 4.6C.

    Hi,
    When you go in the debugging mode for eg when you use call function in a prog the internal tables defined in that prog become inactiv in the function code unless you pass it as an interface in the call function
    Also ,the internal tables are acticve depending on the place of declaration.
    You can find which internal tables are active in which part of the code by going to tables tab in debugger , if the internal table is not active there you will get an error message when you type the table name in the field and press snter.
    the msg will read that table is not defined.
    Thank you1
    Please reward points if helpful.
    Sunmit.

  • How can I get my non purchased song content from ipod touch 4 back to my itunes library. My library

    How can I get my non purchased song content back into my itunes library from my ipod touch 4. My itunes had disappeared so I had to get another itunes & start again. I still have the original song content in the ipod.

    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • How can I know how much Gb I have in my iTunes music library

    I am thinking about buying a new iPhone which can store all my music. Therefor I would like to know how much Gb my library in iTunes now has to have an idea of what iPhone to buy (and save for). How can I easily check that?

    Liza,
    Also check out the "convert higher bit rate songs..." feature.  It can put smaller size versions of the songs onto your device, without changing the library copy at all. This helps you get more out of your iPhone storage space.
    It is very easy to use, although it may run slowly the first time you use it.

  • How can I know how many views are maintained for specific or group material

    Hello, All,
    How can I get know how many views which are already maintained in the material master for one specific or one group material? And which views? Is there any T-code or table to get those views list for material?
    Thank you very much

    Hi,
      You can check in table MARA, field VPSTA details as given below
    User department     Maintenance status
    Work scheduling           A
    Accounting                                 B
    Classification                            C
    MRP                                 D
    Purchasing                                  E
    Production resources/tools       F
    Costing                                  G
    Basic data                                  K
    Storage                                  L
    Forecasting                              P
    Quality management           Q
    Warehouse managemen          S
    sales                                        V
    Plant stocks                                 X
    Storage location stocks            Z
    regards,
    zafar

  • How can I know WHICH cookie in the list is the one I want to delete?

    OK, an unwanted, annoying cookie pops up.
    I go to the list of cookies in the Privacy section but I can't IDENTIFY the NAME of the cookie I want to delete.
    How can I tell its name?

    See also:
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies
    You can check to cookies for the domain in the currently selected tab:
    *Click the "Site Identity Button" (globe/padlock) on the location bar
    *Click "More Information" to open "Page Info > Security"
    *Click "View Cookies" to view the cookies for the domain in the currently selected tab
    Also make sure that you do not get confused by messages from BetterPrivacy.
    *https://addons.mozilla.org/firefox/addon/betterprivacy/

  • If your Iphone 2 is disabled, how can you restore it without losing the contents? We know the right passcode.

    We are trying to restore a disabled Iphone 3. It does not have active phone service, but is used for apps. We know the correct passcode but my son entered it wrong too many times and it disabled. The phone says to connect to ITunes but that is not working because of the passcode. Does anyone know how to restore the phone without losing the contents?

    You will have to restore, losing anything not saved to your computer.

  • How can I know if I have the Latest Version of LiveType?

    Warning, this falls into the "I'm stupid so this is a stupid question" category.
    How can I check to see if I have the latest version of LiveType?
    Currently I have version 2.1
    It came with my Final Cut Express -- my FCE version reads 3.5.1
    I tried software update, I tried the LT and FCE menus. Any ideas?
    Thanks.

    You have the latest version of LiveType; the information here will be updated shortly after any future updates.
    (23832)

  • How can i make sure all of the files in my music file are on my itunes??

    I copied all of my itunes music via usb drive (crappy process) onto my mac in my music folder.. but it too several times due to the small size of the usb drive.. anyways..
    When you add music to your music folder.. it doesn't go onto your itunes playlist until you choose that specific song..
    can itunes perform a search to make sure you have a copy of every music file on your itunes?

    iTunes menu File -> Add to library and select the \Music\iTunes\iTunes music\ folder.
    FYI: If you are using iTunes 9, go to \Music\iTunes\iTunes media\ folder.
    Make an alias on the desktop of the *Automatically add to iTunes* folder. Then drag songs to the is folder and they will automatically get added to iTunes and moved to the correct folder.

Maybe you are looking for

  • How to create a generic method?

    Hi,   I am using a std task TS01200205 to create instance for a BOR object. There are 2 key fields. I want to pass these 2 to the ObjectKey field. As for as I know, we have to concatenate these two Keyfields and assign it to 'Object Key' parameter.  

  • How to edit rescue email address

    I do not see a way to edit/delete my rescue email address as the support site tells me.  I do not remember my answers to the security questions and need to reset these.  Thank you

  • SD Material determination - copy control - print out

    Hi Experts, I'm using material determination for inquiries (AF). In that material determionation it's defined that substitute products will be displayed for selection and the original entered material number will be used for print out. When I'm creat

  • Necesito formatear de cero un imac g5

    Necesito formatear un imac g5 de cero sin los cds originales, me gustaría tener un poco de apoyo, para saber lo mejor a hacer, al no tener cds originales no se como sin piratear un dvd de mac os x tiger.Por favor ayuda

  • How to get Compilation (mix cd) artists to show up under Artists in itunes?

    Self explainatory. Added photo of what i'd like to be able to do: http://www.upload.ee/image/3426387/Capture.PNG I am using Itunes 10.7 Thanks