HT5295 changing function of next and back buttons on podcast app

is there a way to set the next or back functions to skip ahead or back 15 or 30 seconds? So instead of going to the next track, when i would press the next button on a bluetooth device, the podcast would skip 30 seconds.

No.

Similar Messages

Problems with Next and Back Buttons ActionScript 3.0

Hi,
I have set up a Back, Play and Next buttons in a slideshow I am making. The next and back buttons work correctly until it gets to the end.
If I press the Next button it goes back to what appears to be Frame 1 and will not go to the next slide. If I press the Back button it will then go to Frame 201 and If I press next again it will go to Frame 1. It will only go back and forth in between those frames.
If I press the Back button from the beginning it goes through the slide show correctly then it gets stuck at Frame 1. If I press next button it goes to Frame 121 and gets stuck in between 121 and 1.
I can't figure this out please help.
My code on Frame 1 is:
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent) { gotoAndPlay(2); }
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
gotoAndStop(40);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
gotoAndStop(281);
My code on Frame 40 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
gotoAndStop(121);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
My code on Frame 121 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
gotoAndStop(201);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
gotoAndStop(40);
My code on Frame 201 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
gotoAndStop(281);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
gotoAndStop(121);
My code on Frame 281 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
gotoAndStop(1);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
gotoAndStop(201);

I found the solution! Flash CS5 Tutorial 6 Click On Button Go To Another Frame.avi - YouTube
I had to Convert to Keyframes each frames I wanted to jump to on the buttons layer. Then highlight the button and give each another instance name! Like forward1_btn, forward2_btn, back1_btn, back2_btn... I did that and adjusted the action-script for each button.
Frame 1
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent)
gotoAndPlay(2);
forward1_btn.addEventListener(MouseEvent.CLICK, Shoot_1);
function Shoot_1(event:MouseEvent):void
gotoAndStop(40);
back1_btn.addEventListener(MouseEvent.CLICK, Back_1);
function Back_1(event:MouseEvent):void
gotoAndStop(281);
Frame 40
forward2_btn.addEventListener(MouseEvent.CLICK, Shoot_2);
function Shoot_2(event:MouseEvent):void
gotoAndStop(121);
back5_btn.addEventListener(MouseEvent.CLICK, Back_5);
function Back_5(event:MouseEvent):void
gotoAndStop(1);
And so on...

Catalyst Image Gallery: Next and Back button.

I see a lot of tutorial uses thumbnail images to select specific stage or images using datalist.
What I'm looking for is how to create a button that function as a 'next' and 'back' button.

Would this tutorial answer what you are after?
http://chrisgriffith.wordpress.com/2010/08/14/building-a-scrolling-thumbnail-component/
Chris

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

How can i create forward and back buttons for a dreamweaver slideshow?

Hi
I am an illustrator attempting to create a website in dreamweaver (basically it will be an online portfolio). I would like to have a box/slideshow with images of my work that someone can browse through by clicking 'next' and 'back' buttons. Does anyone know how to do this? I have been trying to find out how to do this for ages - i dont want to use flash if possible as i am worried about making the site too complicated. I know how to make swap image thumbnails, but i think my site would be more user friendly (and look more professional) if i could have next and back buttons. Would this involve complicated css code (which scares the life out of me!) or is there a relatively easy way to do it? I have got two 'dreamweaver for idiots' books, but neither of them cover this topic. Can anyone help?

If you are using CS4, there is a Command to create a Web Album... this does it automatically for you.
Otherwise, you can create this manually. Say you have 3 pages,
page1.html (is the index page of the album)
page2.html
page3.html
Therefore, using ordinary text links
Home would link to page1.html
Previous would link to page3.html
Next would link to page2.html
You would need to make adjustments naturally to each page as you move along with the gallery pages, changing the previous and the next links as needed. Below is a a basic example of setting up the links in a simple table structure. You would also then style the table layout as you see fit - yes, using css preferably :-)
<table>
<tr>
<td><h2>MY GALLERY OF PHOTOS</h2>
<a href="page3.html">Previous</a> | <a href="index.html">Home</a> | <a href="page2.html">Next</a>
</td>
</tr>
<tr>
<td>
<br>
<a href="../images/img_2401_jpg.jpg"><img src="../images/img_2401_jpg.jpg" border=0></a><br>
</td>
</tr>
</table>
Here's an article on creating an album using the DW Command I mentioned earlier. You could create the album and then copy and paste the code into a current page if you've already designed on.,... not too difficult, I just tested it. You do however, need to have Fireworks to process the images.
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ad1.html
You could also check out the Lightbox effect which is very popular:
http://www.lokeshdhakar.com/projects/lightbox2/
Or do a google search for 'jquery'. There are different album effects using that framework as well.
Hope some of this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

How do I change the lable of next and previous button in GAF of FPM

Hi Experts,
How do I change the label of next and previous button in GAF application using FPM in each individual step?
Thanks!

Hello Anthony,
as far as I am aware only the final step before the confirmation screen can be changed. Which you can do by clicking on it in the configuration view - click on the last but one step - and click on the next button - at the bottom of the screen you'll get a view where you can change the label of the step.
There is some logic in this - in that it does make for a more consistent user experience across various apps.
It's different to how we could do things in Java - but it's nice that there is a certain level of conformity across FPM apps.
hope this helps,
Cheers,
Chris

How to make next and previous button function

Hello
Can anybody help me with how to achieve next and previous button function such as the one at www.bestbuy.com?
I would appreciate any help or suggestion.
Thank you!

if you're not familiar with flash it might be easiest to place your initial "page" in frame 1, the 2nd (or next) page in frame 2, the 3rd/next page in frame 3 etc.
place your previous and next buttons in their own layer that spans the main timeline (which will have as many frames as you have "pages"). give them instance names (say prevBtn and nextBtn).
you can then use the following code placed in frame 1:
var tl:MovieClip=this
prevBtn.onRelease=function(){
tl.prevFrame();
nextBtn.onRelease=function(){
tl.nextFrame();

Enabling Next and Previous buttons in their conventional functions

How do I enable standard "Next" and "Previous" buttons for
WebHelp in RoboHelp 2002 r2?
I learned from a previous message that the default "Next" and
"Previous" buttons that are displayed on the (small) Nav bar are
for Browse sequences only. I need to display "Next" and "Previous"
in their more conventional functions - as a method for moving
sequentially to topics already viewed.
Thanks for all your help - CKA

Hi beckela and welcome to our community
The link below should help with this.
Click
here

Next and previous button

Hi,
Just got back from the APEX class. Very new at this.
I just created two button called PREVIOUS AND NEXT. When I press PREVIOUS or NEXT button I want it to go to previous or next record within the same form page.
What do I have to do to make it functional in APEX. I mean, what code,processes is needed and how to do it.
I would appreciate it if someone has done it and maybe show me the code/process of how to do it. Maybe they can share their application on apex.oracle.com.
Please let me know.
Appreciate a lot
Munish
Edited by: user4848861 on Sep 4, 2009 8:37 AM

Hi,
When I first come to a page, I show an interactive report. Interactive report has an edit button.
When user clicks on the edit button, it goes to a form where user can edit the record.
Once the user edits the record, they want to go to the next or previous record. What needs to be done on next and previous button to accomplish that.
For eg. If I am on record 1, when I press NEXT I should go to record 2.

I cannot find the next and previous button in iTunes get info menu? Is there anyone that has also experienced this problem that can help me please

I cannot find the next and previous button in iTunes get info menu?
Is there anyone that has also experienced this problem that can help me please
I have the lates version of Itunes

I have managed to figure out how to solve this problem, after looking around I saw a lot of people kept saying makesure it is list view however this still did not work, I found the only way for me get these buttons back was to change the Movie to a TV Show and only then did the "Next" and "Previous" button appear. Right Click> Get Info > Options > Media Kind and then Select TV Show, this is extremely inconvienent but the only way that I found that has worked so far.
Hope this works for you too!!

Updated to 3.0 - sluggish responses and "back" button no longer working?

Hi all, first post - I'd like to know if others are having similar experiences after upgrading to 3.0 on a 2nd gen ipod touch.
First off, when playing music, the "back" button always used to take me back to the previous song if the current song had only just started. However, now when I press "back", I get a random song, just like pressing "forward" in shuffle mode - so I cannot go back to re-rate a song for example. I want my "back" button back!
Second, does anyone else find the responses to the "forward" and "back" buttons slow? There's like a half-second delay while the ipod "thinks" about performing the action, and before the screen updates (scrolls to the next album cover or details screen).
Hoping there will be an official update ASAP to address these issues!

Anytime you have problems like this, you should go through this routine:
1. Restart your iPod - Hold the Sleep/Wake button down until you see the red slider - turn it off. To turn it back on, use the Sleep/Wake button and you will see an Apple icon as it restarts.
2. Reset your iPod - Hold the Sleep/Wake button and the Home buttons down together until you see an Apple logo (takes about 10 seconds). Let your iPod restart.
3. And finally, if those don't work for you, restore your iPod in iTunes. Everything will be wiped off and reloaded - and no, you won't lose anything.
BTW, broken WiFi seems to be a very individual problem and there appear to be some work arounds. Battery life doesn't seem to be a general issue but again, an individual problem.

In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

Forward and Back Buttons Don't Work

Greetings,
My forward and back buttons on the mouse don't work in PSE 7. Instead I always have to click the forward or back buttons on the toolbar, or use keyboard shortcuts (alt+left arrow or alt+right arrow).
Does anyone else have the same problem?
Thanks,
Shane.
Photoshop Elements 7
Windows Vista Home Premium SP2

This is working for me. The forward and backward buttons on the toolbar would work only with pressing of Alt button i.e. Alt+Left arrow.
Suppose you are in Single image view, and press left and right arrow keys, application would switch to previous and next photo respectively.
Please let me know if you have other concern.
~Sourabh

How do I make a custom Forward button and Back button?

I've got an almost completely custom theme and it's working great with one exception: The forward and back buttons (used to move between menu pages) are from the original theme I based mine on, and they are now white on white = invisible.
I tried showing package contents and completely replacing the two images in the Forward button folder, but when I return to iDVD and reapply the theme, there is no change.
Thanks,
ck

A further note: They seem to be the one button type that you can't select. Even in editing (non-preview) mode, if you click on them, they route you to the appropriate page. So there's no way (apparently) to select them and change their color.
In case you're curious how I saw them to click them, I just took some lucky guesses. They appear while pressed on, and they also appear if you cursor to them in Preview mode using arrow keys or the virtual-remote window.

Next and previous button issue with Prettyphoto in filtered gallery

Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolf

bump PLEASE HELP

HT5295 changing function of next and back buttons on podcast app

Similar Messages

Maybe you are looking for