HT5312 Exceeded Maximum Attempts

Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
<Edited By Host>

I'm not sure why the hosts edited you post, but if you posted personal info then you are talking to fellow users on here, not iTunes Support.
If you can't remember the answers to your questions then if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

Similar Messages

HT5312 How do I receive rescue email - I have exceeded maximum attempts

How do I receive rescue email - I have exceeded maximum attempts
I have this message:
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.

If there's an option on that message to have it sent to you, use it, wait a few hours, and check the spam filter. If not or it doesn't work, you need to contact Apple, either through the link in that article or by phoning them.
(79307)

I can't remember my security question and now it's Exceeded Maximum Attempts.

I want to buy line's sticker, it ask me to verify my apple id with my security question.
But I can't remember them, so I've try to find the way to change them.
And I try to answer but they're wrong.
Now it already reach Exceeded Maximum Attempts,
What can I do now?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Exceeded Maximum Attempts Problem

Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here for assistance.
This message appears with the knowledge that Save the questions and answers well
I hope to solve the problem and thank you very much

And, did you Click here for assistance?
Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Project Exceeds Maximum Content Duration? - Help!

Have a new Dual G5 iMac and running iMovie HD 6.0. I've just finished editing a graduation video that is 97 minutes in length and 5.35 GB in size. When I attempt to burn after creating a iDVD intro theme, I get the message that "the project exceeds maximum content duration. To burn a DVD change the encoder settings to best quality."
Of course I have changed the setting, but the same message keeps appearing. I thought I had 2 hours worth of space? Making the video any shorter is not an option.
Can anyone help me get this burned and out to my graduates?
Many Thanks!
Chris

To repair disk permissions, go to your Applications folder, Utiltities folder then open Disk Utility. In there you will find buttons for check disk permissions and repair disk permissions. Just click on the repair one. This sort of sets a lot of stuff back to where they should be and it is generally recommended that you repair permissions, at the very least, after you install anything new. Some people do it before and after an install. And in general once in a while is a good idea. I always do it before I go to burn a new DVD with iDVD. Repairing permissions takes a couple minutes.
Patrick

CSA 5.0: Complexity Exceeds Maximum

Recently I was tuning out some false positives and was unable to generate the rules due to a complexity of greater than 7500 exceeds maximum of 7500.
I searched the forum and found out the there is a limit to the number of complexity points set at 7500.
The post says to remove old Rules/Groups and Rule Modules or try condesing all of those.
I have gone through and made the changes that would put me under the limit. But when I attempt to generate these rules to move under the limit I receive the same warning.
How can I get under the limit if I cannot generate any changes?

Response from Cisco Tech Support.
This happens when there are too many literals in the ruleset. A literal is anything defined in a fileset. For example, foo.exe is 1 literal. foo.exe, foo2.exe are two literals. To reduce the literals and thus generate rules successfully, one needs to wildcard and generalize when possible. So foo*.exe would change the literals to 1 from 2 (from foo.exe and foo2.exe for example). The maximum literals is 7500.
Basically, for a little insight into why the value of 7500 was selected. The default rule sets have a complexity of no more than 2500. The internal Cisco Policy is not even double that value. So triple the default was selected to allow plenty of rule for customization.
If you exceed 7500 literals, rule generation would be extremely slow and would most likely timeout.
As a rule of thumb: always wildcard where possible.

Field in data file exceeds maximum length

Hi,
I am trying to run the following SQL*Loader control job on my Oracle 11gR2 . Running the SQL*Loader control job results in the ‘Field in data file exceeds maximum length’ error message. Below, I am listing the control file.Please Suggest. Thanks
It's giving me an error when I run SQL Loader on it,
Record 61: Rejected - Error on table RMS_TABLE, column GEOM.SDO_POINT.X.
Field in data file exceeds maximum length.
Here is my SQL Loader Control file,
LOAD DATA
INFILE *
TRUNCATE
CONTINUEIF NEXT(1:1) = '#'
INTO TABLE RMS_TABLE
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS (
   Status NULLIF Status = BLANKS,
   Score,
   Match_type NULLIF Match_type = BLANKS,
   Match_addr NULLIF Match_addr = BLANKS,
   Side NULLIF Side = BLANKS,
   User_fld NULLIF User_fld = BLANKS,
   Addr_type NULLIF Addr_type = BLANKS,
   ARC_Street NULLIF ARC_Street = BLANKS,
   ARC_City NULLIF ARC_City = BLANKS,
   ARC_State NULLIF ARC_State = BLANKS,
   ARC_ZIP NULLIF ARC_ZIP = BLANKS,
   INCIDENT_N NULLIF INCIDENT_N = BLANKS,
   CDATE NULLIF CDATE = BLANKS,
   CTIME NULLIF CTIME = BLANKS,
   DISTRICT NULLIF DISTRICT = BLANKS,
LOCATION
NULLIF LOCATION = BLANKS,
   MAPLOCATIO
NULLIF MAPLOCATIO = BLANKS,
   LOCATION_T
NULLIF LOCATION_T = BLANKS,
   DAYCODE
NULLIF DAYCODE = BLANKS,
   CAUSE
NULLIF CAUSE = BLANKS,
   GEOM COLUMN OBJECT
     SDO_GTYPE       INTEGER EXTERNAL,
     SDO_POINT COLUMN OBJECT
       (X            FLOAT EXTERNAL,
        Y            FLOAT EXTERNAL)
CREATE TABLE RMS_TABLE (
Status VARCHAR2(1),
Score NUMBER,
Match_type VARCHAR2(2),
Match_addr VARCHAR2(120),
Side VARCHAR2(1),
User_fld VARCHAR2(120),
Addr_type VARCHAR2(20),
ARC_Street VARCHAR2(100),
ARC_City VARCHAR2(40),
ARC_State VARCHAR2(20),
ARC_ZIP VARCHAR2(10),
INCIDENT_N VARCHAR2(9),
CDATE VARCHAR2(10),
CTIME VARCHAR2(8),
DISTRICT VARCHAR2(4),
LOCATION VARCHAR2(128),
MAPLOCATIO VARCHAR2(100),
LOCATION_T VARCHAR2(42),
DAYCODE VARCHAR2(1),
CAUSE VARCHAR2(17),
GEOM MDSYS.SDO_GEOMETRY);

Hi,
Looks like you have a problem with record 61 in your data file. Can you please post it in reply.
Regards
Ivan

ORA-01044: size of buffer bound to variable exceeds maximum

Hello Oracle Gurus,
I have a tricky problem.
I have a stored procedure which has to retun more than 100,000 records. In my stored procedure, I have "TABLE OF VARCHAR2(512) INDEX BY BINARY_INTEGER". It fails when I try to get 80,000 records.
I get an error "ORA-01044: size 40960000 of buffer bound to variable exceeds maximum 33554432"
A simple calculation shows that 512*80000=40960000.
Oracle help suggests to reduce buffer size (i.e., number of records being returned or size of variable).
But, reducing the number of records returned or reducing the size of variable is not possible because of our product design constraints.
Are there any other options like changing some database startup parameters to solve this problem?
Thanks,
Sridhar

We are migrating an application running on Oracle 8i to 9i and found the same problem with some of the stored procedures.
Our setup:
+ Oracle 9.2.0.3.0
+ VB6 Application using OLEDB for Oracle ...
+ MDAC 2.8 msdaora.dll - 2.80.1022.0 (srv03_rtm.030324-2048)
I am calling a stored procedure from VB like this one:
{? = call trev.p_planung.GET_ALL_KONTEN(?,?,{resultset 3611, l_konto_id, l_name,l_ro_id, l_beschreibung, l_typ, l_plg_id})}
If setting the parameter "resultset" beyond a certain limit, I will eventually get this ORA-01044 error. This even happens, if the returned number of records is smaller than what supplied in the resultset parameter (I manually set the "resultset" param in the stored procedure string). E.g.:
resultset = 1000 -> ORA-06513: PL/SQL: Index der PL/SQL-Tabelle ungÃ¼ltig fÃ¼r Language-Array vom Host
resultset = 2000 -> OK (actual return: 1043 Recordsets)
resultset = 3000 -> ORA-01044: GrÃ¶Ãe 6000000 des Puffers fÃ¼r Variable Ã¼berschreitet HÃ¶chstwert von 4194304
resultset = 3500 -> ORA-01044: GrÃ¶Ãe 7000000 des Puffers fÃ¼r Variable Ã¼berschreitet HÃ¶chstwert von 4194304
... therefore one record is calculated here 7000000/3500=2000 bytes.
In Oracle 8i we never had this problem. As this is a huge application using a lot stored procedures, changing all "select" stored procedures to "get data by chunks" (suggestet in some forum threads in OTN) ist not an option.
Interesting: I can call the stored procedure above with the same parameters as given in VB from e.g. Quest SQL Navigator or sql plus successfully and retrieve all data!
Is there any other known solution to this problem in Oracle 9i? Is it possible to increase the maximum buffer size (Oracle documentation: ORA-01044 ... Action: Reduce the buffer size.)? What buffer size is meant here - which part in the communication chain supplies this buffer?
Any help highly appreciated!
Sincerely,
Sven Bombach

On load, getting error: Field in data file exceeds maximum length

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0    Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I'm trying to load a table, small in size (110 rows, 6 columns). One of the columns, called NOTES is erroring when I run the load. It is saying that the column size exceeds max limit. As you can see here, the table column is set to 4000 Bytes)
CREATE TABLE NRIS.NRN_REPORT_NOTES
NOTES_CN      VARCHAR2(40 BYTE)               DEFAULT sys_guid()            NOT NULL,
REPORT_GROUP VARCHAR2(100 BYTE)              NOT NULL,
AREACODE      VARCHAR2(50 BYTE)               NOT NULL,
ROUND         NUMBER(3)                       NOT NULL,
NOTES         VARCHAR2(4000 BYTE),
LAST_UPDATE   TIMESTAMP(6) WITH TIME ZONE     DEFAULT systimestamp          NOT NULL
TABLESPACE USERS
RESULT_CACHE (MODE DEFAULT)
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          80K
            NEXT             1M
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
            FLASH_CACHE      DEFAULT
            CELL_FLASH_CACHE DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
I did a little investigating, and it doesn't add up.
when i run
select max(lengthb(notes)) from NRIS.NRN_REPORT_NOTES
I get a return of
643
That tells me that the largest size instance of that column is only 643 bytes. But EVERY insert is failing.
Here is the loader file header, and first couple of inserts:
LOAD DATA
INFILE *
BADFILE './NRIS.NRN_REPORT_NOTES.BAD'
DISCARDFILE './NRIS.NRN_REPORT_NOTES.DSC'
APPEND INTO TABLE NRIS.NRN_REPORT_NOTES
Fields terminated by ";" Optionally enclosed by '|'
NOTES_CN,
REPORT_GROUP,
AREACODE,
ROUND NULLIF (ROUND="NULL"),
NOTES,
LAST_UPDATE TIMESTAMP WITH TIME ZONE "MM/DD/YYYY HH24:MI:SS.FF9 TZR" NULLIF (LAST_UPDATE="NULL")
BEGINDATA
|E2ACF256F01F46A7E0440003BA0F14C2|;|DEMOGRAPHICS|;|A01003|;3;|Demographic results show that 46 percent of visits are made by females. Among racial and ethnic minorities, the most commonly encountered are Native American (4%) and Hispanic / Latino (2%). The age distribution shows that the Bitterroot has a relatively small proportion of children under age 16 (14%) in the visiting population. People over the age of 60 account for about 22% of visits.   Most of the visitation is from the local area. More than 85% of visits come from people who live within 50 miles.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02046A7E0440003BA0F14C2|;|VISIT DESCRIPTION|;|A01003|;3;|Most visits to the Bitterroot are fairly short. Over half of the visits last less than 3 hours. The median length of visit to overnight sites is about 43 hours, or about 2 days. The average Wilderness visit lasts only about 6 hours, although more than half of those visits are shorter than 3 hours long.   Most visits come from people who are fairly frequent visitors. Over thirty percent are made by people who visit between 40 and 100 times per year. Another 8 percent of visits are from people who report visiting more than 100 times per year.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02146A7E0440003BA0F14C2|;|ACTIVITIES|;|A01003|;3;|The most frequently reported primary activity is hiking/walking (42%), followed by downhill skiing (12%), and hunting (8%). Over half of the visits report participating in relaxing and viewing scenery.|;07/29/2013 16:09:27.000000000 -06:00
Here is the full beginning of the loader log, ending after the first row return. (They ALL say the same error)
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Aug 22 12:09:07 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File:   NRIS.NRN_REPORT_NOTES.ctl
Data File:      NRIS.NRN_REPORT_NOTES.ctl
Bad File:     ./NRIS.NRN_REPORT_NOTES.BAD
Discard File: ./NRIS.NRN_REPORT_NOTES.DSC
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table NRIS.NRN_REPORT_NOTES, loaded from every logical record.
Insert option in effect for this table: APPEND
   Column Name                  Position   Len Term Encl Datatype
NOTES_CN                            FIRST     *   ; O(|) CHARACTER
REPORT_GROUP                         NEXT     *   ; O(|) CHARACTER
AREACODE                             NEXT     *   ; O(|) CHARACTER
ROUND                                NEXT     *   ; O(|) CHARACTER
    NULL if ROUND = 0X4e554c4c(character 'NULL')
NOTES                                NEXT     *   ; O(|) CHARACTER
LAST_UPDATE                          NEXT     *   ; O(|) DATETIME MM/DD/YYYY HH24:MI:SS.FF9 TZR
    NULL if LAST_UPDATE = 0X4e554c4c(character 'NULL')
Record 1: Rejected - Error on table NRIS.NRN_REPORT_NOTES, column NOTES.
Field in data file exceeds maximum length...
I am not seeing why this would be failing.

HI,
the problem is delimited data defaults to char(255)..... Very helpful I know.....
what you need to two is tell sqlldr hat the data is longer than this.
so change notes to notes char(4000) in you control file and it should work.
cheers,
harry

Column name length exceeds maximum allowed

Hello,
I get this error when am trying to create a table. ERROR: Column name length exceeds maximum allowed length(30).
Is it able to extend this length to be more than 30 ? By the way I am using Oracle 11g
Regards,
Moussa El Tayeb
about.me/MoussaEltayeb

Hello,
also Oracle has some limits. For more Information see the logical limits
http://docs.oracle.com/cd/E14072_01/server.112/e10820/limits.htm
regards
Peter

ORA-30951: Element or attribute at Xpath /AC//Doc[@] exceeds maximum length

Hi All,
I am trying to load the XML Files into a Table using the SQL Loader and i am getting the Error
Record 1: Rejected - Error on table COMMONASSETCATALOG.
ORA-30951: Element or attribute at Xpath /AC/T[1]/T[1]/T[1]/T[1]/T[1]/Doc[@] exceeds maximum length
The <Doc> Element which is child of the <T> contains an XML Schema inside it..
The Doc Element is declared in Schema as
<xs:complexType name="AsDocType">
          <xs:annotation>
               <xs:documentation>A (Doc)ument, a container for any type of file</xs:documentation>
          </xs:annotation>
          <xs:sequence minOccurs="0" maxOccurs="unbounded">
               <xs:any namespace="##any" processContents="lax"/>
          </xs:sequence>
          <xs:attributeGroup ref="AsDocAtts"/>
     </xs:complexType>
The Size of the XML Content that <Doc> Node has is around 34Kb.
Could you pls let me know how to resolve this..
Thanks
Sateesh

Hi All,
I am trying to load the XML Files into a Table using the SQL Loader and i am getting the Error
Record 1: Rejected - Error on table COMMONASSETCATALOG.
ORA-30951: Element or attribute at Xpath /AC/T[1]/T[1]/T[1]/T[1]/T[1]/Doc[@] exceeds maximum length
The <Doc> Element which is child of the <T> contains an XML Schema inside it..
The Doc Element is declared in Schema as
<xs:complexType name="AsDocType">
          <xs:annotation>
               <xs:documentation>A (Doc)ument, a container for any type of file</xs:documentation>
          </xs:annotation>
          <xs:sequence minOccurs="0" maxOccurs="unbounded">
               <xs:any namespace="##any" processContents="lax"/>
          </xs:sequence>
          <xs:attributeGroup ref="AsDocAtts"/>
     </xs:complexType>
The Size of the XML Content that <Doc> Node has is around 34Kb.
Could you pls let me know how to resolve this..
Thanks
Sateesh

Lax validation errors on schema import ('version' exceeds maximum length)

I have a schema as per below. I'm trying to import it into Oracle 10.2.0.2.0. However, I'm getting the following lax validation error:
Error loading ora_business_rule.xsd:ORA-30951: Element or attribute at Xpath /schema[@version] exceeds maximum length
I can fix it by modifying the attribute and shortening it but I'd like to know why it's occuring. Insofar as I can tell there is no imposed limit on the size of schema attributes according to the W3C standard. Which then makes me wonder: does Oracle impose limits on the length of all attributes or is this specific to 'version' ? If there is a limit, what is the upper bound (in bytes) ? Where is this documented?
Cheers,
Daniel
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:br="http://foo.com/BusinessRule_PSG_V001" targetNamespace="http://foo.com/BusinessRule_PSG_V001" elementFormDefault="qualified" attributeFormDefault="unqualified" version="last committed on $LastChangedDate: 2006-05-19 11:00:52 +1000 (Fri, 19 May 2006) $">
     <xs:element name="edit">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="edit_id" type="xs:string"/>
                    <xs:element ref="br:business_rule"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="derivation">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="derivation_id" type="xs:string"/>
                    <xs:element ref="br:derivation_type"/>
                    <xs:element ref="br:business_rule"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="derivation_type">
          <xs:simpleType>
               <xs:restriction base="xs:NMTOKENS">
                    <xs:enumeration value="complex"/>
                    <xs:enumeration value="format"/>
                    <xs:enumeration value="formula"/>
                    <xs:enumeration value="recode"/>
                    <xs:enumeration value="SAS code"/>
                    <xs:enumeration value="transfer"/>
                    <xs:enumeration value="count"/>
                    <xs:enumeration value="sum"/>
                    <xs:enumeration value="max"/>
                    <xs:enumeration value="min"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="business_rule"></xs:element>
</xs:schema>

Opps -- Sorry it's a decision we took when looking at Version
When we registered the Schema for Schemas during XDB bootstrap the Version attriubte was mapped to varchar2(12).
SQL> desc xdb.xdb$schema_T
Name                                      Null?    Type
SCHEMA_URL                                         VARCHAR2(700)
TARGET_NAMESPACE                                   VARCHAR2(2000)
VERSION                                            VARCHAR2(12)
NUM_PROPS                                          NUMBER(38)
FINAL_DEFAULT                                      XDB.XDB$DERIVATIONCHOICE
BLOCK_DEFAULT                                      XDB.XDB$DERIVATIONCHOICE
ELEMENT_FORM_DFLT                                  XDB.XDB$FORMCHOICE
ATTRIBUTE_FORM_DFLT                                XDB.XDB$FORMCHOICE
ELEMENTS                                           XDB.XDB$XMLTYPE_REF_LIST_T
SIMPLE_TYPE                                        XDB.XDB$XMLTYPE_REF_LIST_T
COMPLEX_TYPES                                      XDB.XDB$XMLTYPE_REF_LIST_T
ATTRIBUTES                                         XDB.XDB$XMLTYPE_REF_LIST_T
IMPORTS                                            XDB.XDB$IMPORT_LIST_T
INCLUDES                                           XDB.XDB$INCLUDE_LIST_T
FLAGS                                              RAW(4)
SYS_XDBPD$                                         XDB.XDB$RAW_LIST_T
ANNOTATIONS                                        XDB.XDB$ANNOTATION_LIST_T
MAP_TO_NCHAR                                       RAW(1)
MAP_TO_LOB                                         RAW(1)
GROUPS                                             XDB.XDB$XMLTYPE_REF_LIST_T
ATTRGROUPS                                         XDB.XDB$XMLTYPE_REF_LIST_T
ID                                                 VARCHAR2(256)
VARRAY_AS_TAB                                      RAW(1)
SCHEMA_OWNER                                       VARCHAR2(30)
NOTATIONS                                          XDB.XDB$NOTATION_LIST_T
LANG                                               VARCHAR2(4000)
SQL>

SDO_ORDINATES.X.Field in data file exceeds maximum length

Hi All,
While loading data in .SHP file into oracle spatial through SHP2SDO tool following error message appears:
Error message:
Record 54284: Rejected - Error on table GEO_PARCEL_CENTROID, column CENTROID_GEOM.SDO_ORDINATES.X.
Field in data file exceeds maximum length.
I read some where this is due to the SQL * Loader takes default column value to 255 characters. But there is confusion to me how to change the column size in control file because it is object data type. I am not sure this is correct or not.
The control file show as below:
LOAD DATA
INFILE geo_parcel_centroid.dat
TRUNCATE
CONTINUEIF NEXT(1:1) = '#'
INTO TABLE GEO_PARCEL_CENTROID
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS (
CENTROID_ID INTEGER EXTERNAL,
APN_NUMBER      NULLIF APN_NUMBER = BLANKS,
PROPERTY_A      NULLIF PROPERTY_A = BLANKS,
PROPERTY_C      NULLIF PROPERTY_C = BLANKS,
OWNER_NAME      NULLIF OWNER_NAME = BLANKS,
THOMAS_GRI      NULLIF THOMAS_GRI = BLANKS,
MAIL_ADDRE      NULLIF MAIL_ADDRE = BLANKS,
MAIL_CITY_      NULLIF MAIL_CITY_ = BLANKS,
MSLINK,
MAPID,
GMRotation,
CENTROID_GEOM COLUMN OBJECT
SDO_GTYPE INTEGER EXTERNAL,
SDO_ELEM_INFO VARRAY TERMINATED BY '|/'
(X FLOAT EXTERNAL),
SDO_ORDINATES VARRAY TERMINATED BY '|/'
(X FLOAT EXTERNAL)
Any help on this would appreciate.
Thanks,
[email protected]

Hi,
Looks like you have a problem with record 61 in your data file. Can you please post it in reply.
Regards
Ivan

SQL Loader - Field in data file exceeds maximum length

Dear All,
I have a file which has more than 4000 characters in a field and I wish to load the data in a table with field length = 4000. but I receive error as
Field in data file exceeds maximum lengthThe below given are the scripts and ctl file
Table creation script:
CREATE TABLE "TEST_TAB"
    "STR" VARCHAR2(4000 BYTE),
    "STR2" VARCHAR2(4000 BYTE),
    "STR3" VARCHAR2(4000 BYTE)
);Control file:
LOAD DATA
INFILE 'C:\table_export.txt'
APPEND INTO TABLE TEST_TAB
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
( STR CHAR(4000) "SUBSTR(:STR,1,4000)" ,
STR2 CHAR(4000) "SUBSTR(:STR2,1,4000)" ,
STR3 CHAR(4000) "SUBSTR(:STR3,1,4000)"
)Log:
SQL*Loader: Release 10.2.0.1.0 - Production on Mon Jul 26 16:06:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File:   C:\TEST_TAB.CTL
Data File:      C:\table_export.txt
Bad File:     C:\TEST_TAB.BAD
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 0
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table TEST_TAB, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
STR                                 FIRST 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR,1,4000)"
STR2                                 NEXT 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR2,1,4000)"
STR3                                 NEXT 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR3,1,4000)"
value used for ROWS parameter changed from 64 to 21
Record 1: Rejected - Error on table TEST_TAB, column STR.
Field in data file exceeds maximum length
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table TEST_TAB:
0 Rows successfully loaded.
1 Row not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                 252126 bytes(21 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             1
Total logical records rejected:         1
Total logical records discarded:        0
Run began on Mon Jul 26 16:06:25 2010
Run ended on Mon Jul 26 16:06:25 2010
Elapsed time was:     00:00:00.22
CPU time was:         00:00:00.15Please suggest a way to get it done.
Thanks for reading the post!
*009*

Hi Toni,
Thanks for the reply.
Do you mean this?
CREATE TABLE "TEST"."TEST_TAB"
    "STR" VARCHAR2(4001),
    "STR2" VARCHAR2(4001),
    "STR3" VARCHAR2(4001)
);However this does not work as the error would be:
Error at Command Line:8 Column:20
Error report:
SQL Error: ORA-00910: specified length too long for its datatype
00910. 00000 - "specified length too long for its datatype"
*Cause:    for datatypes CHAR and RAW, the length specified was > 2000;
           otherwise, the length specified was > 4000.
*Action:   use a shorter length or switch to a datatype permitting a
           longer length such as a VARCHAR2, LONG CHAR, or LONG RAW*009*
Edited by: 009 on Jul 28, 2010 6:15 AM

HT5312 Exceeded Maximum Attempts

Similar Messages

Maybe you are looking for