HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

http://en.wikipedia.org/wiki/4K_resolution
http://en.wikipedia.org/wiki/4K_UHD
http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
Wall Street Journal · 2 hours ago
Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

Similar Messages

Why does my Mac Pro late 2013 drive both monitors with one GPU?

System report shows both of my WQHD monitors are running on one GPU. When I add an HDMI display, it also runs on the same GPU. Why would it not split the load? This makes me wonder about when both GPUs are working, if ever. Since Activity Monitor does not report GPU activity, does anyone know of an app that gives real-time reports on GPU usage?

If you add six displays, they will all be supported by one GPU -- the display GPU. The second GPU is reserved for un-interrupted GPU computing and has no Display output Hardware.
Anandtech has a discussion of this in his review of the late 2013 Mac Pro.
Under OS X the situation is a bit more complicated. There is no system-wide CrossFire X equivalent that will automatically split up rendering tasks across both GPUs.
By default, one GPU is setup for display duties while the other is used exclusively for GPU compute workloads. GPUs are notoriously bad at context switching, which can severely limit compute performance if the GPU also has to deal with the rendering workloads associated with display in a modern OS. NVIDIA sought to address a similar problem with their Maximus technology, combining Quadro and Tesla cards into a single system for display and compute.
from section 9:
http://www.anandtech.com/show/7603/mac-pro-review-late-2013/9

Why isn't Photoshop fully optimized for the Mac Pro (Late 2013), and when will this happen?

On the new Mac Pro (late 2013):
Currently, Photoshop CC 2014 seems to lag behind iMacs and Macbook Pros (even older ones) for some tasks.
I assume that this issue is related to either multi-core processing but seems more likely to be a problem with the ATI GPUs not being optimized as the Nvidia GPUs are.
Why is this the case, and when will this be addressed?
Any feedback from Adobe official would be appreciated.
Thanks

jameskachan wrote:
…The obvious reason [sic] seems to suggest…
That's what it suggests to you, in the limited scope of your vision and knowledge, and without your having provided detailed specs about your hardware.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
We don't even know what your specific issues are, and for all we know you may be running the pathetic, buggy Yosemite OS—which Apple is giving away for free.
In this case, you have been enormously fortunate in that you received a reply from none other than Gµrµ Chris Cox, a top Adobe engineer who has been writing Photoshop code since the last millennium.
It's hight time you drop the attitude and avoid further embarrassing yourself in a public forum. Just my two cents.

Why does the Mac Pro merge email accounts?

When I set up the email the MacPro merged mine and my husbands accounts. How can I separate them?

INBOX is by design, the Union of all of your listed email accounts. I have six email accounts for various purposes that feed into my inbox.
If you want to look at them individually, just select the specific email account you wish to see displayed.
Mac OS X is prepared to have login accounts for each person, so that all their individual preferences (screensaver, opened Applications, desktop background, and lots of other items) can be tracked separately.
If you do not want to view your husband's email in your Inbox, give him his own login and put his email account there instead of in your inbox.

How can Mac Pro (late 2013) create a WiFi network for Mac Books to connect to internet?

I am moving my Mac-Pro (late 2013) to a garden office. I have an ethernet cable to connect it to the house network. I also have a Mac Book Air which will only connect to a network by WiFi. I can use this Mac-Pro to create a WiFi network and the MacBook can talk to the Mac Pro over this WiFi network. But the Mac Book does not see the local network let alone the Internet, both of which are seen on the Mac Pro.
Is there a way that I can connect the created WiFi network to one of the two Ethernet cards in the Mac Pro?
Or what?
Tim

I have half cracked it.
For some reason the first step it to turn internet sharing off.
Then internet sharing can be configured and the wireless network set up and given a password.
Then, and then only, turn internet sharing back on and turn WiFi ON. All this is on the Mac-Pro (late 2013).
Now the Mac Air sees the new network and can log on and connect to the WAN internet locations, at least via Safari.
BUT if I use Finder on the Air, it will connect to the Mac Pro but it will not display what is on its disc. Though I can do screen sharing. Odd.
Also Air-Drop has stopped working, so there is no means of transferring files between the Pro and the Air.
I am going away now for a few days and will revisit this on my return.
Thanks for your help.

How Do I format my Mac Pro Late 2013

the mac pro late 2013 is well known the be equipped with a PCIe SSD .... Will the Erase function in disk utility with one time pass Zeros work or will it damage the drive? Thanks

Zero is the same when using a SSD as doing writes, so basically you just filled the drive which now needs to be restored and used cells "trimmed.:"
Damage, no, but SSDs have spare cells, can manage quite well, and you don't need to try to force it to reallocate cells.
Clone the drive.
If you play around with Windows and Boot Camp or have created partitions you want to remove and want to start over, you still would not want to zero the drive.

Sound Card Specs on Mac Pro Late 2013

Does anyone have detailed information about the Sound Card used in the Mac Pro Late 2013 or where I can find these?
Is this sound card capable of outputting a digital signal capable of professional audio processing? I'd like to connect it straight to a high end external DAC.
Thanks!

I'm currently using a Meridian Explorer. It works quite well for me with my Audio Engine A5+ active speakers.

Mac Pro (Late 2013), Photoshop CC stamp tools and Yosemite Problems

Lately when I'm using the the stamp tool in Photoshop CC after a few clicks I hear a short "click click" out of the Mac Pro Late 2013 when then goes on to freeze
my keyboard and basically makes it useless. I then have to save the photo by clicking in the menu bar, restart the computer which clears the problem. I'm using a Wacom Intuos Pro and thought it could the problem but I tried it also with a normal usb mouth clicking on an image and get the same results. What is this "click click" noise because as soon as I hear that I know that the Mac Pro is going to freeze.........anyone else having any Photoshop problems?

I've not tried exporting with Premiere but with After Effects on my identical Mac Pro also using istat menus, I rarely if ever see the 2nd GPU spin up. I'm exporting right now for example and:
makes me wonder if this is infact an issue with Istat menus or if the 2nd gpu really isnt being utilized.

New Mac Pro (late 2013), Boot Camp, Windows Server 2012

Does new Mac Pro (late 2013) support Windows Server 2012 install by Boot Camp?

No.
Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
Apologies, Templeton Peck, did not see your post.

Why does my Mac Pro try to start up from a blank drive?

I fitted a 2nd drive to my 2006 Mac Pro in anticipation of dual booting Windows (not done yet). The dive is FAT formatted but is empty. Why does the Mac Pro try to boot up from that drive every time I start it up, despite having set the startup disc as OS X in the System Prefs?! Getting sick of seeing the flashing folder with the question mark evry time I start it up.

I might be inclined to think the problem is really on your startup drive. You might try reinstalling Snow Leopard.
Also, try:
Resetting your Mac's PRAM and NVRAM
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

After Effects is NOT using the full Twelve GB of memory on my Mac Pro late 2013 dual video cards

I would like to know if there is a reason why AE CC12 and CC13 (2014) is not using the full amount of video card memory on my MP late 2013. It's six GB per freaking card I invested in and its not accessing it.
Is there a work around this issue?

Why shouldn't it. When I upgraded to this new Mac Pro late 2013 with its dual video cards. Premier turned into a blasting fast editor. I no longer need to render my edited cuts and the scrubbing of preview and timeline footage is phenomenal. The only performance boost I've seen in AE with this new system is in rendering and I can't even say its double as fast in comparison to Premier or Encoder and its an 8-Core system with 32GB of ram. Everything else is flying.
So again to answer your why should it. I rebuttal with "Why shouldn't it". The other two mentioned programs are using GPU resources to improve performance why is AE so behind the curve.
I'm not the only one asking why. I was in the audience at a Dmala meeting here in LA with Todd Kopriva and Al Mooney previewing AE and Premier 2014.
People kept asking Todd about performance boost in between questions about new features. Todd finally just asked what do you prefer a couple of new features or performance boost. Everyone wanted performance boost over new features. If you think I'm making this up go ask Todd Kopriva.

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

My Mac Pro (Late 2013) with an Apple SSD as the only storage will not restart

I have a Mac Pro (Late 2013) with an APPLE SSD SM0256F as the only storage. When I restart all I get is the spinning bars. I have to manually hold the power button down to force shutdown. I have let it try to restart for as long as 30 minutes. It will start just fine from a shutdown. I am running Yosemite 10.10.2 (14C1510). I have used Disk Utility with no errors. The only time I need to restart is after a system upgrade. I have tried, as others have suggested, selecting the drive from the Startup Drive preferences with no difference. Any help is much appreciated!

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next note the time of text problem and then after reboot open the Console app and look for log entries at that time. Post suspicious ones here

Why does my Mac Pro turn completely off while in the sleep mode?

Why does my Mac Pro turn off completley overnight when I had placed it in the sleep mode?

A power fluctuation may also shut your computer off from sleep mode.
Is there anything in the System Log overnight?
Here is a related article:
About diagnostic and usage data in OS X Lion and Mountain Lion

USB Card Reader not recognized on new Mac Pro (late 2013)

My Sony USB multi-card reader (model: MRW62E), which I use for SD cards mostly, works on my MacBook Pro (Retina, Mid 2012), my new iMac, and my old Mac Pro (2009), via the USB ports, but is unrecognized entirely on my new Mac Pro (late 2013). All machines are running OS X Yosemite 10.10.2. Neither the card reader, nor the cards appear at all in FCP, image capture, apple system profiler, the desktop, or disk utility. I cannot find any drivers online addressing the issue, including Sony's website.
Perhaps an additional update for increased compatibility vis-a-vis the new Mac Pro would do the trick...

Does the reader show up under USB in System Report?
If the reader is working properly both the reader and an inserted card will show up.

HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

Similar Messages

Maybe you are looking for