HTML ATTACHMENT - SPECIAL CHARACTERS IS COMING WRONLY

Hi All,
i have used SO_DOCUMENT_SEND_API1 to send the attachment in mail ... in attachment mail it is not supporting special characters, showing the characters wrongly
For example..
User given Decription
Moeda Comemorações e Evento
Recieved Output like this
Moeda Comemora瀵es e Evento
Please let me know any parameter i have missed to enable unicode functionality.
searched in the SDN, some suggestions to apply the sap note but my system is already applied ...
Thanks,
ram

Hi,
Pass the attachement data to contents_hex instead of contents_bin
See the conversion between the bin and hexa..
CALL FUNCTION 'SO_RAW_TO_RTF'
    TABLES
      objcont_old = lt_objbin
      objcont_new = lt_objbin.
LOOP AT lt_objbin INTO l_line.
   conv = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' endian = 'B').
    CALL METHOD conv->write( data = l_line ).
    l_buffer = conv->get_buffer( ).
    MOVE l_buffer TO l_hexa.
    MOVE l_hexa TO l_hex-line.
    APPEND l_hex TO lt_contents_hex.
ENDLOOP.
For more help refer to this link for example..http://docs.google.com/Doc?id=dfv2hmgs_6hf8nm5f4&hl=en

Similar Messages

HTML Editor - converting "special characters" into entities

Hi everyone,
I'm currently in the middle of formatting my wife's novel into 'clean' html so I can use Calibre to create a well formatted epub/mobi/etc.
I've read that TextMate on Mac includes a function to "Convert Selection to Entities excluding Tags". In other words it will replace all special characters (ellipses, copyright sign, etc) with the html entities.
I'm currently using Kate and I can't seem to find anything similar. Is anyone aware of any linux editors with the same function?
Thanks for the help!

ctarwater wrote:Encoding is already UTF-8 but I'm trying to make these docs as "universal" as possible and I've read that little things like replacing quotation marks and other symbols with their html entities is a good step in that direction.
In situations with multiple encodings this might be the case, but the XML spec requires UTF‐8 support at minimum and defaults to it when the encoding is not declared. All XML parsers can deal with UTF‐8.
In fact, replacing UTF‐8 characters with entities is less portable in XML. This is because the available entities are defined by the doctype, and XML only supports five by default (<, >, ", &, and '). Things like … are defined in the HTML and XHTML doctypes, but not in other dialects of XML. This used to bite RSS pretty hard (probably still does), because people assumed the entities were available everywhere when they’re really not. EPUB and Mobi are based on XHTML, but other formats might use other XML dialects.

Html special characters

when using the Dreamweaver 'Set Text of Layer' behavior,
Dreamweaver correctly converts all html
special characters, such as accents like � and &,
and quotes and double quotes, so that it is safe
as a javascript string, and will display properly.
I am trying to figure out what PHP function can do the same
encoding, to simple text files (textEdit
on the Mac).
I have tried htmlentities(), but it does not work, accented
letters like � just desappear from the
string.
I have tried htmlspecialchars() and it does not work
either...
I have tried about 10 others functions found on Google but
nothing works.
Anybody knows what exact function Dreamweaver uses to do this
conversion?
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

should be > to >
< to <

HTML special characters in form input

In my site I store form input in my database. Before I store
the data, I parse out smart quotes, en dashes, and other extended
special characters and convert them into HTHML quivalents such as
’
All is well and good until the user goes to edit their info.
In my form these characters show up in my <input> tags as
their long-winded HTML equivalents, such as ’ instead of
a smart apostrophe.
Is there any way to convert these back to the special
characters from the HTML on the form input text fields so that
users can edit them without being confused?
Thanks.

Hmmm, well I ran the MX 6.1 updater and installed the two hot
fixes that had to do with null pointer exceptions and it still does
not work.
Here is the detailed error I'm getting, if it helps. Any more
ideas? Thanks again for the help, I'm really stuck on this one...
The system has attempted to use an undefined value, which
usually indicates a programming error, either in your code or some
system code.
Null Pointers are another name for undefined values.
The error occurred in C:\Inetpub\wwwroot\store\index.cfm:
line 1
1 : <cfquery name="getBooks" datasource="#dsn#">
2 : SELECT *
3 : FROM products
Please try the following:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.7) Gecko/20070914 Firefox/2.0.0.7
Remote Address 127.0.0.1
Referrer
Date/Time 09-Oct-07 02:20 PM
Stack Trace
at
cfindex2ecfm1770128649.runPage(C:\Inetpub\wwwroot\store\index.cfm:1)
java.lang.NullPointerException
at coldfusion.sql.QueryTable.populate(QueryTable.java:260)
at coldfusion.sql.QueryTable.populate(QueryTable.java:159)
at coldfusion.sql.Executive.getRowSet(Executive.java:505)
at coldfusion.sql.Executive.executeQuery(Executive.java:974)
at coldfusion.sql.Executive.executeQuery(Executive.java:886)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:236)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:447)
at
cfindex2ecfm1770128649.runPage(C:\Inetpub\wwwroot\store\index.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:147)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:357)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:62)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:107)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:24)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:47)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:35)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:43)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:249)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:192)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

SSRS and data from SharePoint lists - special characters in HTML

Hi All,
This may not actually fit into this forum, but here goes anyway...
We're using SSRS to report on data stored in Project Server workspaces (so SharePoint lists). Prior to upgrading to 2013, we could pull this data in and set the "Placeholder properties" of the text box to interpret HTML tags as styles and it would
format everything as it appeared in the SharePoint list. Now that we have upgraded to 2013, this works with a few notable exceptions - some special characters are rendered as their escaped/encoded (whatever the term is) - so a colon which is within the text
field in SharePoint, rather than appearing in the SSRS report as ":" appears as ":".
These are multiline, rich text formatted columns in the SharePoint list. Using =Replace(Fields!Description.Value,":",":") in the report makes the appropriate replacement, but given that this occurs with a handful of other special
characters as well, this solution becomes very unruley very quickly. Has anyone else encountered this, or does anyone have any other suggestions for a work around?
If not now, when?

Facing same issue but having no solution, please suggest..

Special Characters in a HTML region

I recently upgraded from HTMLDB 2.0 to APEX 2.2 and I'm having trouble with some special characters. 
 
I have HTML region in which I display a hidden item. The hidden item (P1_TEST) has the following value: 
 
STRING1 STRING2 STRING3 
 
The region source has a single reference to the hidden item: 
 
&P1_TEST. <- the period is there. :) 
 
In HTMLDB 2.0 the display in the HTML region would render the region as 
 
STRING1 
STRING2 
STRING3 
 
In APEX 2.2, the region is rendered as 
 
STRING1 STRING2 STRING3 
 
which is obviously not what I want. 
 
Any ideas anybody? I must be missing something simple. :) 
 
Thanks, Kent

Kent - This is explained here: Re: Computed Region TItles being Escaped in Apex 2.2 You can use an application item instead of a hidden page item as a quick solution. To continue to use a page item you can make its display type Display as Text (does not save state) and set its display condition to Never.
Although this change from 2.0 to 2.2 necessitates this type of inconvenient program modification, the benefit is that a cross-site scripting vulnerability that existed in your application will now be corrected.
Scott

Special Characters in imported HTML

I've got a Flash piece where the user fills out a
questionnaire, and based on their responses, they are shown a
handful of recommendations. These recommendations are all separate
HTML files that load into a scrolling text field as HTML text.
There is an English version and a Spanish version. The
English version works fine.
In the Spanish version, on the other hand, we've got special
characters such as accents over e's, tildes over n's, and so forth.
In the HTML, I've used codes for special characters, such as
ñ for ñ. That didn't work. In the resulting
recommendations, this code appears, not the ñ.
Then I tried just putting the special characters into the
HTML, without the special code. That looks fine on my computer (Mac
G5 running Firefox), but on Windows IE instead of the special
characters, we get one of those diamond shapes with a "?" in the
middle of it.
In my recommendations field, I have it set to embed all
characters. The font is Verdana, which should include the special
characters. Does anyone know if the display of special characters
in Flash is possible, and how I would do it?

add <?xml version="1.0" encoding="UTF-8"?> tag to 1st
line of your xml, AND
save your xml file encoding as utf-8, if you are using
notepad, try this:
- save as, change the encoding (the bottom field) to UTF-8
no worry about your file extension.
UTF-8 (8-bit Unicode Transformation Format) supports multiple
languages.
good luck

Need help in setting file name with special characters in attachment

Hi
We have a requirement where we need to set the file name that contains special characters (like Russian) and send mauil using Java mail.
If we set the file name as such, the attachment in the email contains garbled filename
Can you pl let me know how to resolve this?
We should use the file name as attachment name and this will have say special characters. The receiver who gets the mail should get with the correct attachment name
One important point.. the attachments are opened from MS outlook.
Thanks and regards
Ram
Edited by: 884910 on 13 Sep, 2011 5:00 AM

Read the FAQ carefully. You don't need to call encodeText unless you're using a really
old version of JavaMail.
And, it depends on whether the mail reader you're using is handling encoded parameters
according to the (new) MIME standard, or according to the (old) non-standard hack.
Sadly, without knowing what mail reader the recipient is using, it's impossible to use
encoded filenames that will work everywhere.

Mail.app hang if mail attachment have special characters in file name

Hello,
I have upgraded to 10.5.1 from last version of Tiger.
After upgrade is not possible send message with attachment which have a czech special characters in file name (like á, í, é, ý, ú, ů, ě, š, č, ř, ž) with Mail.app. If I try it, CPU is overloaded and I must kill Mail.app process.
The same problem have my friends who are running a clear installation of Leopard 10.5.1.
Thanks for correction.

I have the same problem with Hungarian chars. I tried out Tomas suggestion and it really worked. It is so dissaponting to have this kind of bug in a system like this. They never tested against this situation.
I hope somebody at apple read this discussion and somehow this will be fixed in the near future.

Javamail API doesn't support special characters in attachment file name

Hi,
We are using Java Mail API to retrieve the attachment's file name, but it sometimes returns the file name as junk character (if the attachment contains special characters) and it is not able to return original file name for some attachments:
Our code sample :
void getFileName(Part part) {
String fname=null;
fname = part.getFileName();
Actually the problem is with the attachment file name which contains special character. For example below is the attachment file name (please find the sample attached file which is causing this issue):
Sample – 1234abc.doc
From above you could see the file name contains a special character (Sample – 1234abc.doc), i.e. The character ‘–’ is not a regular hyphen character, it’s a special character. Hence the Java mail API returns the name as below:
Sample ? 1234abc.doc
So the special character is being replaced with ‘?’ symbol. But if I store this file in local folder and try reading the file name using Java IO packages, it returns the file name without adding ‘?’ symbol.
Is there any way to handle such kind of special characters in Mail API?
Regards,
Vinodh

We dealt with this issue in a private email conversation.
JavaMail is returning the correct data for the filename. The problem is in the way the filename is being displayed.

Special characters in file name of attachment...

Hello,
I attached a file in SC which had # in the file name. I was not able to open the attachment... Is there any restrictions on using the special characters in attachment file name?
Regards
Amit

Hi. Yes, we had the exact same thing. If the file name is not A to Z or 0 to 9 it can not be opened.
I think we asked SAP and there was no solution for our system.
I think it depends on your file system and things like that though.
Regards,
Dave.

OT: HTML Special Characters

I often use HTML special characters in place of images. Until now, I've had to search many sites to find the exact character and code desired. This site has them all neatly organized for quick reference. Way cool!
http://ikwebdesigner.com/special-characters/
❄ ☃ ❄
Season's Greetings!
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

I know a lot of those that I use all of the time, but there are tons I've never used. This is a great holiday present, Nancy!
-Mark

Convert HTML special characters to String

Hi,
I'm looking for an easy way to convert HTML special characters (like "&#246") to String.
Any Ideas how implement this? Thanks

Hi,
I'm looking for an easy way to convert HTML special
characters (like "�") to String.
Any Ideas how implement this? Thankswell im assuming that you mean that when you are working with java you will be getting a ? instead of the character you want. assuming that you are reading and writing to this html file. if not well maybe this can stil help : BufferedReader inFile = new BufferedReader(new InputStreamReader(new FileInputStream(fileName),"ISO8859-1"));
PrintWriter outFile = new PrintWriter(new OutputStreamWriter(new FileOutputStream(fileName2), "ISO8859-1")); basically you need to make sure that ou define ISO8859-1 as the encoding.

Special characters in java, oracle and html

Hi,
I'm working on a mini content management system and need help with dealing with special characters.
The input are taken from html form which are then stored into a varchar column in oracle database.
When i retrieve the data, some of the special characters have been changed to ??? and also
fields with double quote are modified.
I believe there two issues;
1. dealing with special characters
2. display special characters back in html form textfield after retrieving.
e.g.
This is the line with "quote" saved to database
This is the line with "quote" retrieved from database
This is the line with displayed in html text field.
Any help will be much appreciated.
Thanks in advance.

Maybe you should try this couple of classes: java.net.URLDecoder and java.net.URLEncoder
Andres
Best

How to Handle Special Characters in PI7.1

Hi Team,
I need to handle some special characters like <,>,& etc.. from WS Adapter to CRM in PI 7.1.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken]
By using the above blog i had implemented the Java Code as
public void execute(InputStream in, OutputStream out){
try{
int read_data;
while((read_data = in.read()) != -1){
if (read_data == '&'){
out.write("&".getBytes());
}else if (read_data == '>'){
out.write(">".getBytes());
}else if (read_data == '<'){
out.write("<".getBytes());
}else if (read_data == '/'){
out.write("&frasl;".getBytes());
}else if (read_data == '\''){
out.write("'".getBytes());
else { out.write(read_data);
out.flush();
} catch (Exception e){}
I had added this class file in Operational Mapping.
It is working if we have only one IF condition for & in while
Any suggestion
Thanks
Sriram

Hi Ramesh,
Thanks for your inputs, I have tried your code but it is not working. The error message stays the same.
Dear Stephane,
To describe the error more, the requirement is the payload coming from source through WS Adapter consists of the special characters <, > , & which are basic sematics of XML syntax. I need PI to process this payload with special characters and successfully transfer it to target CRM system. I have created the Java class with code (ref: Blog 9420) as stated earlier and added this class to my existing Operation Mapping. I am expecting the java mapping to replace the special characters in payload like < with ">" . So as the case with the other characters >,&,'
After activaton of my operation mapping, I triggered the test message with Soap UI client and I could able to get a successful mapping only When I put the logic for &ampersand symbol only. However when I am trying to add the logic for > or < or ' the mapping is failing . I am using UTF-8 encoding across the source and PI enviroments.
Sample SOAP message :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:abcabca.com">
 <soapenv:Header/>
 <soapenv:Body>
 <urn:MT_ABCDEFG_Req>
 <activity>
 <id/>
 <type>ZEMA</type>
 <actionType>C</actionType>
 <firewall>10000003</firewall>
 <subject>small > < attachment test</subject>
 <location/>
 <startDate>2010-07-08T10:53:31.000Z</startDate>
 <endDate>2010-07-08T10:53:31.000Z</endDate>
 <mainClient>1000319</mainClient>
 <mainContact>1000003</mainContact>
 <isConfidential>false</isConfidential>
 <summary/>
 <fullText>test body - small.txt</fullText>
 <owner>1000021</owner>
 <from>ABCDEDF</from>
 <sendTo>emailaddress</sendTo>
 <copyTo/>
 <keywords/>
 <referenceId/>
 <createdBy>1000021</createdBy>
 <additionalContacts/>
 <additionalClients/>
 <additionalParticipants/>
 <status>A0008</status>
 <attachments>
 <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
 <fileName>small.txt</fileName>
 </attachments>
 <attachments>
 <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
 <fileName>EMail 2010-07-08.pdf</fileName>
 </attachments>
 </activity>
 </urn:MT_ABCDEFG_Req>
 </soapenv:Body>
</soapenv:Envelope>
Output on the SOAP UI client for the above request:

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
 at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1160)
 at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(
What do you think where I am doing the wrong?
Sriram

HTML ATTACHMENT - SPECIAL CHARACTERS IS COMING WRONLY

Similar Messages

Maybe you are looking for