Html scripts for changing texts

does anyone have an html snippet code for flashing text like on the hot news headlines at the bottom of the apple home page - i have located scrolling text - but not flashing, or changing text? thanks

I just posted javascript snippet couple days ago to rotate images:
http://discussions.apple.com/thread.jspa?messageID=7079863&#7079863
The same method can be used for text head liners, however it's depend on how the head liners are supplied.
If you have to supply the head lines, you are on your own; you'll have to update them.
or you can use some ready made such as BBC: http://news.bbc.co.uk/nol/ifsnews/hi/frontpage/ticker.stm
or you can use webclip, webclip makes part of a web page into Dashboard widget, then process Dashboard code into HTML code. Anyway, here is Apple header liners in webclip: http://hdl.50webs.com/Dashboard/Widgets.html

Similar Messages

SAP VB script for updating texts in purchase orders

Hello,
I am trying to create a SAP script for updating texts in purchase orders. It is in the last third - Item Detail, Texts tab.
The script is ok apart from the fact that it always deletes whatever text is in there and than add a new one.
I would like to keep history in the texts tab and always just add one line to existing texts. Is there any way (command) how
to keep existing texts and only add a new line to the top?
Thanks a lot!
Jan

Yes, you are exactly right. I have already figured it out as well. I did not expect it would be that easy. But thanks a lot anyway for replying on this!
Now I am struggeling with changing SAPLMEGUI in vb scripts for ME22n. Sometimes, there is SAPLMEGUI:0010 and sometimes SAPLMEGUI:0015. Even when the users have the same screens in the beginning the SAPLMEGUI number differs. They also do one item by hand and than it changes. It keeps changing between SAPLMEGUI:0010 and SAPLMEGUI:0015
Is there a way how to have the same number of SAPLMEGUI or how to eliminate this issue?
Thanks a lot
Jan

Scripts for changing the address of the user when they have been in the box for 6 months

Scripts for changing the address of the user when they have been in the box for 6 months
If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old
Anyone have suggestions on how I can go about it?

What is this "box"? What is this "folder" you're asking about? You'll likely get a better answer if you use standard terminology.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I am in need of ai script for arcing text

i am in need of ai script for arcing text

A little vague aren't we… Is this the kind of arcing you mean? Text along a curve or do you mean distorting into an arch like some plug-in can?
#target illustrator
var doc = app.activeDocument;
doc.defaultFilled = false, doc.defaultStroked = true;
var textPath = doc.pathItems.ellipse( 0, 0, doc.width, doc.height );
textPath.pathPoints[3].selected = PathPointSelection.ANCHORPOINT;
app.cut();
doc.selection = null;
app.redraw();
var tp = doc.textFrames.pathText( doc.pathItems[0], 0, 0, TextOrientation.HORIZONTAL );
tp.textRange.paragraphAttributes.justification = Justification.CENTER;
tp.textRange.characterAttributes.size = 60;
tp.contents = 'I am in need of ai script…';
var tpd = tp.duplicate();
tpd.translate( 0, -150 );
tpd.textRange.characterAttributes.size = 90;
tpd.contents = '…for arcing text?';

Edit catt script for changes in in web appl server higher than 6.4 release

Hello Gurus,
Will you help me in editing the CATT script for changes in Web application server release higher than 6.4 release, when I look for edit mode it was showing the following message. will anyone suggest me is there any way to make changes.
While I was choosing change mode it was displaying the above message ( Message No:TT005)
Full points for the answer

It seems there there is no problem with my FireFox 7.0.1 on my Mac OSX 10.7.2. So, maybe you can solve the problem by updating your OS. The only minor problem here is that Firefox doesn't display in the Tibetan fonts that you choose, it always display in Kailas font for Tibetan.

Is there a script for changing layer names in ID CS4?

I have multiple documents with an average of 20 layers in each. Each of the layers is named for the expiration date of the coupon in the ads. When a new order comes in I retrieve the previous files and change the dates via scripts and the Find/Change option. I have looked but cannot find a way to rename the dates in the layers as well.
Does anyone know of a script for this?
Thanks in advance!

E-mail, eh? You're missing out a lot of fun stuff, as there is
- editing your own posts
- using bold and italics to highlight important stuff
- finally being able to shout (some posters think it's necessary to use a large bold font to make their post stand out in the crowd. They are correct, it does. In the Bad way.)
- inserting images
- uh, Jive (-- sorry, couldn't think of any more fun stuff to add)
Visit the scripting forum (using a web browser, s'il vous plait) by clicking here.

WLST script for changing password for userid in Weblogic 9.2

Hello Everyone,
We want to change password for userid in weblogic 9.2. Is there a way we can do this by using WLST script? If so please provide me with steps for doing that using WLST. Thanks in advance.
- - Weblogic Consultant

Did you try going to the WLST documentation and searching for it? Go to [http://edocs.bea.com/wls/docs92/pdf/config_scripting.pdf] and search for "Changing a Password". The example there seems to be what you need.

Script for changing tif links to jpeg

Hi,
I have a file linked to a bunch of tifs. I've run a script in PS converting those images to jpeg. I could manually change each link, but I'd much rather use a script to go through my doc and convert my link urls from *.tif to *.jpg
Has anyone come across a script for this? and if not, I can build one, but I'm having trouble finding the InDesign Scripting Reference pdf. Can someone point me in the direction?
Thanks,
Stan

I attached a new version of the script, but I haven't properly tested it yet.
Is there a repository of InDesign scripts online somewhere? if there isn't there oughtta be....
Here is Scriptopedia by Loik.
I started a new page on my site where I want to post scripts for download and links to scripts on other sites, sorted by categories.
There are loads of scripts on InDesign Exchange, but some of them are quite outdated — it takes ages to post scripts there.

Script for changing InCopy assignment locations globally

I have a book with multiple documents with hundreds of separate stories. I need a script to change the assignment locations globally within the ID document to a single folder. As it stands now, I can only change them one by one using their individual Assignment Options dialogue box in ID. Also, it would be nice to also be able to change the "Assigned to" field to a specific set of person(s).
Someone had written a script a while back for ID2 that did just this but I can't seem to locate it. Not sure it would work with CS3.
Anyone have any ideas?

As Andbrowny asked, have you tried using OS X's Locations? See KB 106653, Using network locations in Mac OS X.
If that doesn't give you the power that you need, checkout Location X.

Use Story to create a script for subtitle text

I have found a way to use the Speech Analysis through After Affects to create subtitles. However, the film I am making is a documentary and in a foreign language. We have the transcripts of the translated speech and I need to get that into Premiere and eventually After Effects to create the visual subtitles.
I have seen some threads on using Story to enter transcripts, but I'm new to this Story application and can't figure out how to use it for what I want. I need to assign the text I have to a specific place on the clip. Can Story (and/or Premiere) do this and how do I do it?
I have assigned a scene number then some text, but nothing is showing up in the clip's metadata with the script assigned to it.
Any suggestions? Any other ideas for getting text assigned to timecode points for subtitles?
Thanks.

If you are looking at attaching the story scripts (scene's) data to the clips metadata please follow the instructions from this thread
http://forums.adobe.com/thread/1043216?tstart=0

How to make a script for find text object?

Hi everyone
I want to make a script for find and select text object and then find next, find next, and so on, but without any open dialog
Is that possible make a script for this?
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "(\[\x{2022}\])|(\x{25CF})";
app.findGrep();
thanks
Regard

You already have that. A script does not 'find, select, find next' - it finds all texts as soon as you execute the 'app.findGrep' command.

HTML Script For Video On iPhone

Hello everyone,
I've been trying for the past few months now to embed a .mv4 file into my website.
I tried every single script possible and am still incapable of making this file show up on my iPhone.
<body>
<div id="movie">
<a href="intro/intro.mov"><img src="../intro/intro-poster.jpg", border="0", width="428", height="222" />
</div>
</body>
Please check the following link for the full source
www.realworksanddesigns.com/mobileindex.html
Thanks for your help
Jeremy

Perhaps the information in this section of Apple's developer information will help:
https://developer.apple.com/library/safari/#documentation/AudioVideo/Conceptual/ Using_HTML5_Audio_Video/Introduction/Introduction.html
In particular review the "iOS-Specific Considerations" section.
Regards.

Script for validating Text fields or numeric fields

I'm looking for a simple script that will check the entered data in a specific field.If i enter numbers in the name/last name field i should get a pop up message that entering numbers in this field are not allowed.
(And vice versa regarding numeric fields).
What is the script for that ?

Hi,
try this:
//var reg = /^\d+$/;    // checks whether input contains ONLY digits
var reg = /\d+/;    // checks whether input contains digits AND letters
var check = reg.exec(xfa.resolveNode("#subform[0].#field[0]").rawValue);
if (check == null)
    app.alert("Everything's fine!");
else
    app.alert("Entering digits is not allowed!");
You may want to replace
#subform[0] with the name of the subform the field to check is located in and
#field[0] with the name of the field to check for digits.
Also, you may want to select any of the regular expressions, which fits best your needs. See comment in the above code-fragement for further information.
Regards,
Steve

Help: how to fix a line in this script (almost good) for change text to real UPPERCASE?

app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = '\\l\\l+';
app.activeDocument.characterStyles.item("SC");
foundList = app.activeDocument.findGrep(true);
for (i=0; i<foundList.length; i++)
foundList[i].changecase (ChangecaseMode.UPPERCASE);
The idea is to select the magenta words in scaps to be setted in uppercase.
The problem is the script (based in Jongware and P. Kahrel) is converting all texts to uppercase not assuming the condition under “SC" character style.
instead, it is changing all the text:

try:
app.findGrepPreferences.appliedCharacterStyle = app.activeDocument.characterStyles.item("SC");
*not tested

Can I create a keyboard shortcut for changing text colors in Mail?

When composing an email in Mail (v5.2), I often have the need to change the text of a few words to red to highlight them (e.g. names of people assigned to an action item) but want to do it via keyboard shortcut. I know I can do the following:
Press Command-Shift-C brings up to Colors panel
Choose the color (e.g. Red) with my mouse
Type the text
Choose the color (e.g. back to Black) with my mouse
Continue typing text
And that's if I want the color panel to stay visible (add at least 3 more steps all together if I close it in the interim).
I've tried using keyboard shortcuts to assign a color (couldn't find the right menu path) and Automator to create a script (the color panel always has to be in the right location which it may not be). None of those techniques work.
It's an annoyance more than anything else but I imagine it should be possible.
Thanks for any assistance!
John

Not only is this very possible, it's also very easy. You can do this not just for Quark but for any application in OS X. To accomplish what you want, do the following:
* Firstly, quit QuarkXPress completely. The rest of the steps won't work if it is still running.
* Go to the Apple menu and select System Preferences.
* Click the Keyboard & Mouse System Preference Pane
* Click Keyboard Shortcuts
* Click the + button to add a new shortcut.
* Select QuarkXPress as the application.
* In the Menu Title field type "Place Name" exactly like that but without the quotes.
* Click inside the Shortcut field and type the key combination you want to use for this shortcut. I suggest using Command + one of the F keys, like Command+F1.
* Click Add.
* Close System Preferences
* Run Quark, open a document, and try it out!
Robert

Html scripts for changing texts

Similar Messages

Maybe you are looking for