HTTP-JDBC sync scenario - detailed error message

Hi all,
We have a sync HTTP-JDBC (DB2) scenario.
The sender is expecting a meaningful error message.
HTTP is on ABAP and JDBC is on the Java engine.
So how can I get the error message on the JDBC adapter to be passed to the user.
Say I would like to pass the sql-codes that I find at the Communication Channel monitoring for the comm Channel.
reg

Hi,
One suggestion is to configure alerts at adapter engine level..
to get the error messages to concerned user.
Regards,
Sreenivas.

Similar Messages

Http to jdbc sync scenario needed

hi all,
Can any one give me certain example of http to jdbc sync scenario
Thanks in advance.

Hi,
Refer this link.
For JDBC receiver side settings
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
JDBC Receiver Adapter -- Synchronous Select Step by Step
For HTTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b1/f29e7a56e18a439984a3c6630951d2/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
JDBC Receiver Adapter -- Synchronous Select Step by Step
HTTP Queue
error in HTTP to file scenario
Regards,
Sharanya.
Edited by: sharanya devaraj on Aug 5, 2008 8:09 AM

SSIS - Getting the detailed error message from a FTP Task

Greetings all,
I'm working on a SSIS package that pulls a file down from an FTP server, then has its way with it.
Under expected conditions, everything is working perfectly. However, I never want to download the same file twice. In order to enforce this, I just set the OverWriteFileAtDest option to false. Obviously, if the file has already been brought over, the package
fails. This is the intended functionality.
However, in such a case I want to handle the error separately. Now, when I setup a EventHandler to deal with it, the error message that's passed over is:
"Error: An error occurred in the requested FTP operation"
Oh joy. Ambiguity at its finest. However, the detailed description is:
"Receiving file "/server/folder/file.XLS". File "\\server\folder\file.XLS" already exists.
Try as I might, I can't seem to capture the detailed error message so that I can act on it. I'm looking for a way to capture this info, pass it to an expression, and then handle it from there.
Thanks!

Did you try enabling logging for the package and capturing it in SQL table which case you should get error messages in sysssislog table
http://msdn.microsoft.com/en-IN/library/ms186984(v=sql.110).aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SXMB_MONI detailed error message in XML how can be it retrive .

Hi Guys/SAP,
Iam creating a Zee report for my client to capture all my detail error message which is Display in SXMB_MONI
Error Tab in XML formt .How can i capture this and how it is stroed in SAP.Please kindly let me know.Iam also alalyais this issue for the past 4 days but iam not able to find out where it is stored.If any one come accross this issue or know kindly let me know .Iam expecting few tips from SAP also .Iam also exploring more on this .
The below detilas of error message in SXMB_MONI is required,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Test_SenderJDBC_ReceiverFILE_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Test_SenderJDBC_ReceiverFILE_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Sri

Hello Sri
See the link below:
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
You can use the container variables to output the error information from the message in sxmb_moni.
Regards
Mark

New ipod not syncing to library - error message -69?

Just bought new ipod and it begins to sync with my existing library, but once it gets to the "K"'s it says it can't sync a particular song and then only syncs a tiny fraction of what it was syncing before the error message.
I thought it was a particular problem with the song, so I deleted the song. Then I deleted an entire artist. Then it had the same issue with the next artist in line alphabetically.
Help!

The message is saying that iTunes can find the file for "Stuff you need to know part 3" can't be found. Does (what ever it is, a song? podcast or what) play in iTunes? Try deleting and redownloading.

I am getting this for the first time when i sync .iphone 3gs error message itunes could not sync calendars to the iphone because the sync server failed to sync iphone

i am getting this for the first time when i sync .iphone 3gs error message itunes could not sync calendars to the iphone because the sync server failed to sync iphone

I have tried the suggestion to reset the sync log to no avail. Anyone have another idea? This just started after I downloaded 4.3.5.

I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself.

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Getting more detailed error messages from Adobe Acrobat

Hi
Is there a way to get more detailed error messages from Adobe Acrobat reader when he detecs an error in a PDF file?
My program generates PDF files. There is one that throws an error in Acrobat while GhostScript and Google Chromes PDF Reader display it correctly.
I wonder where the error is, but the error message is just "expected dictionary", when I hold CTRL and press "OK".
GhostScript usually gives useful error messages, but it has no error this time.

More specifically, Acrobat Pro!
- Dov

DSEE 6.3: how to show detailed error messages to ldap clients?

Is there any possibilty in DSEE 6.3 to send to ldap clients detailed error messages about - for example - missing required attributes in ldap add operation?
I don't have access to ldap server's logs, so I loose a lot of time trying to figure out "which of 40 attributes I sent to server is bad?"...

Thank you for reply.
I know that I can view schema, but I need the functionality which is available in relational databases. When I try to store bad field value in database table, I get descriptive error message: "field XYZ has bad value". In DSEE I get "schema violation" or other cryptic message.
It's very hard to track the problem if you operate on 30 or more attributes. Which one causes error?
I see that this functionality is available in DSEE backend (error logs are descriptive). How to turn on this for clients?
If it is not possible, I will try to write special software module which will double DSEE functionality and check attributes before storing them in DSEE.

Detailled error messages

I'd like to see detailled error messages when using the JSP tags provided by the reference implementation. Presently, if you misspell a tag name, omit an attribute etc. all you get is a ServletException from the FacesServlet saying "Unable to compile class for JSP". It is not too easy to find an error based just on that message.

I'd like to see detailled error messages when using
the JSP tags provided by the reference implementation.
Presently, if you misspell a tag name, omit an
attribute etc. all you get is a ServletException from
the FacesServlet saying "Unable to compile class for
JSP". It is not too easy to find an error based just
on that message.Yes, I agree that providing better error feedback to the user at development time, and even at runtime, is a much needed feature of the RI. We'll be auditing our existing practices in this regard before the 1.0 release.
Thanks for noticing this issue. It's something I personally care deeply about and I hope we can nail it sufficiently to satisfy you.
Ed Burns
JavaServer (tm) Faces Reference Implementation team leader.

Detailed Error Messages

We're upgrading from CF8 to CF10. One of the things I always liked about Coldfusion was that it gave some pretty detailed error messages by default, so that you could see roughly where your code was exploding at.
I'm working through updating the places in the code where there's things not compatible before I upgrade on the server, but these generic error messages are pretty useless. Is there any way to get the older style of error messages back in CF10, atleast on the development machine? I'm using the built in web server.

Hi
In ColdFusion 10 Administrator, Debugging & Logging > Debug Output Settings check the first 3 options.
Enable Robust Exception Information
Enable Robust Exception Information
Enable Request Debugging Output
Thanks
VJ

How to get more detailed error messages when using Oracle JDBC

Here are some typical Oracle error messages that leave you guessing :
"ORA-01722: invalid number"
"ORA-00904: invalid column name"
Is there any way to find out which number or which column name is invalid ?
Why doesn't Oracle include this information in the error messages ? If it knows the number or column is invalid, it must know the number or column name !

Launch the query under sqlplus, it'll tell u :
SQL> select user_id, userna from dba_users ;
select user_id, userna from dba_users
ERROR at line 1:
ORA-00904: invalid column name

Sender ABAP Synchronous proxy -- PI -- JDBC sync scenario pls!!

Hi Guys,
Can any one help to find one sample scenario like ABAP Proxy --> PI --> JDBC Sync call ? Sync ABAP proxy sample code any 2 or more filelds going from ABAP proxy and maps on JDBC sync request, up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP one Z table with response.
Any help would be really great!!
Many thanks in advance
San

up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP
one Z table with response.
When you do an update you can get back the number of rows updated in the JDBC response....you can find this in the help page showing JDBC structure. If you are looking for any other response then probably the message needs to be genarated by PI itself after checking the response from JDBC.
Regards,
Abhishek.

HTTP-JDBC sync scenario - detailed error message

Similar Messages

Maybe you are looking for