Http proxy not working with 8.1
Morning, all
Ever since updating to 8.1, I can no longer use an http proxy with my iPhone 4s. This worked fine with 8.0 and earlier, but now I get network errors or Safari says "Safari cannot open the page because the network connection was lost."
The http proxy does work, as confirmed by using it with my MBP connected to the same WiFI router.
I have tried resetting the network settings and have forgotten/reconnected to the network.
Any suggestions?
hi there
just update your driver
here:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-23-inch-Displays/7274717/model/5304243#Z...
Wisnu Suryandi
Similar Messages
-
Http tunnelling not working with virtual host
Hi,
We have recently migrated our application from OC4J server to the Weblogic 11g server. There is one EJB client module which connects using t3 protocol. We are trying to use Http Tunneling for it. The server setup consists of two machines (machine1.global.com and machine2.global.com) in clustered mode. A virtual host cbs.global.com is configured to load balance across the above 2 two machine. Also Apache HTTP Server plugin is used for handling the web tier.
For enabling tunneling, we have checked the 'Enable HTTP Tunneling' check box in the server. Also in the Httpd.conf file, we have added a block for
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
If we give the initial context url as http://machine1.global.com:7005 or http://machine2.global.com, then it is working fine. But when we give the virtual host names - http://cbs.global.com or http://cbs.global.com:7005, it is not working. This application needs to be accessed outside the company network, so we cannot directly give the machine names and have to make it work using virtual host.
Please advise whether any other settings need to be done for enabling the tunnelling for virtual hosts.
Highly appreciate your help in this regard.
Best Regards,
Jaison
Edited by: user13152776 on Aug 29, 2011 7:00 PMThanks Peter for the reply.
We are having multiple managed servers configured to multiple ports - 7003, 7005, 7007, etc. Please find below the mod_wl_ohs.conf file
# NOTE : This is a template to configure mod_weblogic.
LoadModule weblogic_module "${ORACLE_HOME}/ohs/modules/mod_wl_ohs.so"
# This empty block is needed to save mod_wl related configuration from EM to this file when changes are made at the Base Virtual Host Level
<IfModule weblogic_module>
# WebLogicHost <WEBLOGIC_HOST>
# WebLogicPort <WEBLOGIC_PORT>
# Debug ON
# WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/weblogic.log
# MatchExpression *.jsp
# Dev Cluster Configuration - Port 7003
<Location />
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
<Location /intApp>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
# Ocean Cluster Configuration - Port 7005
<Location /CQS>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7005,nooslux051d.gl.2wglobal.com:7005
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/oceancluster.log
MatchExpression *
</Location>
# Websi Cluster Configuration - Port 7007
<Location /si>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7007,nooslux051d.gl.2wglobal.com:7007
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/websicluster.log
MatchExpression *
</Location>
</IfModule>
Best Regards,
Jaison -
Https apache not working with IE
as of a couple patches ago, IE clients stopped being able to access https pages on my server. any attempt to access an https page on my server gives the standard IE "The page cannot be displayed" page. i haven't done anything magical or unusual to my apache config. i have tried the SetEnvIf and the SSLCipherSuite solutions to certain IE I/O errors, but they do not seem to solve my problems. anyone have any insights for me?
yes, I have the same problem and am about 24hrs from losing all my ecommerce clients because of it. If anyone at apple can assist please respond ASAP. I have tried using older binaries of OpenSSL 0.9.7g (instead of i) and libssl.so with no luck. I have adusted httpd.conf for SSLv3 and backing up to SSLV2 using the SSLProtocol and SSLCipherSuite
and have the old fix for ie:
SetEnvIf User-Agent ".MSIE." \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0 -
Applet does not work with a proxy server.URgent
Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
at com/ms/net/wininet/http/HttpInputStream.connect
at com/ms/net/wininet/http/HttpInputStream.<init>
at com/ms/net/wininet/http/HttpURLConnection.createInputStream
at com/ms/net/wininet/WininetURLConnection.getInputStream
at TalkClientApplet.rendezvous
at TalkClientApplet.actionPerformed1
at TalkClientApplet.start
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
System.out.println ("Protocol: " + url.getProtocol());
System.out.println ("Host :" + url.getHost());
System.out.println ("Port :" + url.getPort());
System.out.println ("File :" + url.getFile() );
System.out.println ("Full :" + url.toExternalForm());
System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopperThanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
URL url = new URL(protocol,hostName,portNumber,URLstring);
InputStream in = url.openStream();
BufferedInputStream bis = new BufferedInputStream(in);
StringBuffer input = new StringBuffer(60);
int c;
while ((c = bis.read()) != -1){
System.out.print((char)c);
input.append((char)c);
bis.close();
dataFromServer = input.toString();
catch(Exception ex) {
ex.printStackTrace();
}I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ? -
Revision: 16395
Revision: 16395
Author: [email protected]
Date: 2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java -
Urgent--custom servlet not working with https/gateway of the portal server
We have created the custom servlet to add some more authentication to the login screen. I have explained detaildely below.
We have set if password reset change password screen should come by using identity server.
First screen comes which asks �user id� and �password�.
after this next screen comes with �old password�, �New Password� and �Confirm Password� (as we have forcefully asked user to change password after reset by using identity server ).
On this page we have added two new filed �Date of Birth� and �Date of Joining�.
And we are forcefully transferring request to our Custom Servlet which will validate the �Date of Birth� and �Date of Joining� from the database and submit the same a form as required by Login Servlet to validate the default parameters �old Password�, �New Password� and �Confirm Password� (which is the default validation without adding custom Servlet).
This whole process is working with �http� protocol and giving �unable to connect� host with �https� protocol.
Without custom Servlet process is like this, which is working
Login (usrid, password) � Login (Old Password, New Password, Confirm Password) � Portal home Page
With custom Servlet , Which is not working with �https� Protocol. we are getting the message "Authentication Failed" screen.
Login (usrid, password) --> Login (Old Password, New Password, Confirm Password , Date of Birth, Date of Joinig) --> Custom Servlet validate Date of Birth, Date of Joining --> Login (Old password, new Password, Confirm Password) --> Protal Home Page
This one works with http, whereas this one gives the "Authentication Failed" screen with the https.
Please let me know if anybody have implemented this and help me to resolve the issue.
Best Regards
RamkumarHi,
I am also getting this error message in the sun ONE webserver error log file....
[20/Nov/2004:13:42:39] failure ( 6162): for host 172.16.5.21 trying to GET /amserver/UI/Login, service-j2ee reports:
StandardWrapperValve[LoginServlet]: WEB2792: Servlet.service() for servlet LoginServlet threw exception
com.iplanet.jato.CompleteRequestException
at com.sun.identity.authentication.UI.AuthenticationServletBase.onUncaughtException(AuthenticationServletBase
.java:141)
at com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
Regards
Ramkumar R -
AAA auth with ip http server not working
Hi all,
I am unable to get ip http server to authenticate against tacacs. attached is the debug output when logging in with the user "mark".
Router config:
aaa new-model
aaa authentication login default group tacacs+ local enable
aaa authentication login ALREADY-IN none
aaa authentication login web group tacacs+ local enable
aaa authorization exec web group tacacs+ local if-authenticated
aaa session-id common
ip http server
ip http authentication aaa login-authentication web
ip http authentication aaa exec-authorization web
the priv-lvl 15 attribute is being sent, but IP HTTP Auth fails.. any ideas why?
Cheers,
Mark
Update: Fixed it! I believe the access-enable autocommand was the cause!Hi,
I have seen that additional attributes such as "access-enable timeout 1920" would not allow http authentication to work with certain IOS versions.
Regards,
Vivek -
VM Manager's Launch Console not working with OpenJDK and IcedTea
Fedora 15
java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
icedtea-web-1.0.4-1.fc15.x86_64
ICEDTEA-WEB NOTES
Invalid XML
An error like
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
XMLPROC_PARSE OUTPUT
$ xmlproc_parse ovm_rasproxy-ws.jnlp
xmlproc version 0.70
Parsing 'ovm_rasproxy-ws.jnlp'
E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
Parse complete, 2 error(s) and 0 warning(s)
JAVAWS OUTPUT
$ javaws ovm_rasproxy-ws.jnlp
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
JAVAWS -VERBOSE OUTPUT
$ javaws -verbose ovm_rasproxy-ws.jnlp
No User level deployment.properties found.
Starting security dialog thread
JNLP file location: ovm_rasproxy-ws.jnlp
Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
<?xml version="1.0" encoding="UTF-8"?>
line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
line: 4 <information>
line: 5 <title>Oracle VM Remote Access Service</title>
line: 6 <vendor>Oracle</vendor>
line: 7 <homepage>http://support.oracle.com/</homepage>
line: 8 </information>
line: 9 <resources>
line: 10
line: 11 <j2se version="1.5+"
line: 12 href="http://java.sun.com/products/autodl/j2se" />
line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
line: 14 <jar href="OvmCoreApi.jar" />
line: 15 <jar href="MgmtUtil.jar" />
line: 16 <jar href="Odof.jar" />
line: 17 <jar href="commons-logging-1.1.1.jar" />
line: 18 </resources>
line: 19
line: 20
line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
line: 22 <argument>-server</argument>
line: 23 <argument>192.168.4.21</argument>
line: 24 <argument>-service</argument>
line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
line: 26
line: 27 </application-desc>
line: 28 <security>
line: 29 <all-permissions/>
line: 30 </security>
line: 31 <update check="background"/>
line: 32 </jnlp> net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
... 8 more
Caused by:
net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
[gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
at java.io.DataInputStream.readUTF(DataInputStream.java:589)
at java.io.DataInputStream.readUTF(DataInputStream.java:564)
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
at java.security.KeyStore.load(KeyStore.java:1201)
at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
[gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
at java.io.DataInputStream.readUTF(DataInputStream.java:589)
at java.io.DataInputStream.readUTF(DataInputStream.java:564)
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
at java.security.KeyStore.load(KeyStore.java:1201)
at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
java.io.EOFException
at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
at java.io.DataInputStream.readUTF(DataInputStream.java:589)
at java.io.DataInputStream.readUTF(DataInputStream.java:564)
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
at java.security.KeyStore.load(KeyStore.java:1201)
at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.4.16
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000281734f86e6aab47
Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
INFO: Os is : linux
Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
The console starts and all is well with the world.
This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
[gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
#automatically generated - do not edit
#Tue Oct 04 16:43:29 EDT 2011
last-modified=0
last-updated=1317761009801
content-length=883
If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
Help? -
My operating system windows XP not working with photoshop cloud, why not?
I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
RoyDo you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes -
adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Flash player does not work with Ie or Firefox with win 8.1?
Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11 -
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
Captivate 4 AS2 Text Entry Box not working with Flash Player 11
I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?
You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai -
Hauppauge WinTV-HVR 95Q TV TUNER not working with windows 8.1 HP TouchSmart 15 Notebook PC
I've updated all drivers I can find from the manufracturer. Are there any other HP drivers I need? This worked fine on Windows 7 without having to update to a 'Pro with Media Center' edition. I've updated to Windows 8.1 Pro with Media Center. Another comsumer had their question answered here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/TV-TUNER-not-working-with-w...
Was going to ask if there was a driver for the Hauppague tuner there but it wouldn't let me post a question asking if there was one of those drivers for the Hauppauge WinTV-HVR 950Q.I updated all drivers to their latest versoins before beginning. Waiting on response from vendor.
-
Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeedsMatt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred
Maybe you are looking for
-
KM Activity Reporting -- Enhancing Customer Reports
Hello friends, I have a quick query on KM activity reporting . I came across this article by name "Enhancing Customer Reports with Commands and Parameters" by Thilo Brandt dated 11th July 2006 . Here is the link to the article https://www.sdn.sap.co
-
&DISPLAY_USER not working properly after import/export of application
I'm getting some weird functionality. Several variables are no longer working after I exported and imported a page into the same HTMLDB environment for example at the bottom of the page I now get: User: &DISPLAY_USER Language: &BROWSER_LANGUAGE I ver
-
VENDOR LINE ITEM INTEREST CALCULATION
Hi Friends. I configured all the settings relating to the line item interest calculation on vendor line items with interest calculation frequency as 1 month. When I run the program for the first month by using T.code F.47 by specifying the from date
-
Hello ! I was downloading my free copy of iwork and everything was fine . Keynote and Numbes downloaded and installed normaly but i wanted to pause Pages (in order to save some trafic for my network) but accidentially instead of pause i pressed the
-
RHX5 showing non-existent style
We imported two Word docs, using the same style sheet both in the doc and in RH. All the styles are fine in both docs, except for one style. Doc A shows a good style "InstructionIndent", but in Doc B, the RH style field shows that RH has seen the sam