HTTP revceiver Error

Hi,
I am using an IDoc-to-Http scenario.
I am using a plain HTTP adapter receiver for my interface.
I an getting error at the Call Adapter section as mention below
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Bad Request</SAP:P2>
<SAP:P3>Bad Request</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 400 reason Bad Request explanation Bad Request</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does any one have any idea why i am getting this error? As all the mandatory data is available in the request.
Please help, as this is very critical.
Thanks in Advance,
Smita

Hi Smita,
>>Does any one have any idea why i am getting this error?
This error 400 bad request, means that a request for a URL has been made but the server is not configured or capable of responding to it. This might be the case for URLs that are handed-off to a servlet engine where no default document or servlet is configured, or the HTTP request method is not implemented.Many servlet applications give a 400 response if the request parameters have evidently been edited to make a request that is not permitted for<b> security reasons</b>.
http://www.codestyle.org/sitemanager/FAQ.shtml#why400
Regards
San

Similar Messages

HTTP 302 Error When Scheduling OEM Report

I'm trying to schedule a custom report to run out of OEM 11.1 and am receiving the below error. The report displays properly from the OEM console, but seems to get an HTTP 302 error when trying to schedule the report to run, have changed the schedule options from daily, weekly, one-time immediately, one-time later and all generate the same error. Not sure what is causing the HTTP 302 redirect during the report execution, any help is appreciated.
This is a scheduled report.
The most recently generated report completed with the following error.
Error: Unexpected error getting the HTTP response stream while generating report: oracle.sysman.eml.ip.publishJob.HttpConnectionException:Response code:302
Error Message :302 Moved Temporarily
This document you requested has moved temporarily.
It's now at https://<<hostname>>:7799/em/console/logon/logon;jsessionid=6NJRQGKd2NVwNdbpWpVfHlG7vRxnvmn3VW71JdJbtnLyCJt5hyYt!544936836
Connection: https://<<hostname>>:7799/em/console/home URI:/em/onetime/reports/render?printablePage=true&reportID=C47BD93ACFE176D4E040007F01004FA6&action=save&scheduled=true
Thanks,
Shawn

Issue was related to the Console URL setting in the Grid Control Overview tab, it was set to http://<host>:<port>/em/console and should have been set to http://<host>:<port> instead.

401 Unauthorized:HTTP transport error while calling external WSDL from BPEL

Hi,
I have simple BPEL process whic calls siebel WSDL file through partner link.
I have successfully compiled and deployed BPEL process, when i initiate the Process, instace got errored out at invoke activity.
Error Goes like this
"<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>
</part></remoteFault>"
Can anybody help on this issue, Could you please give me possible solution.
Thank youl.

we have not provided any authentication credentials to XMLSpy, we have just uploaded siebel WSDL file then sent the SOAP request with some customer Id then we have received proper response with all desired customer data.
In the same way we tried to call same siebel WSDL file from BPEL process throgh partner link. errored instance has created with 401 unauthorised HTTP transport error..
Do you think is this probem at siebel application side?
We have deployed our BPEL process to SOA server which is having HTTP port 7777.
as per my investigation,i found that we have to open port from siebel side (which WSDL file we are calling) which matches with above HTTP port number.
Do you have any idea on this above clue? Please let us know more details on this.

While Creating Web service call from JDeveloper getting http 403 error

1. I have created the new application as Oracle Fusion (ADF) application
2. I have included the web service technology to the application
3. I am trying to create new web service data control layer , after specifying URL we are getting the following error
WSDL:Exception:fault code:=OTHER_ERROR failed read from WSDL from http://10.141.28.242:1030/oraclediagent/OdiInvoke?wsdl
HTTP connection error code is 403.
could anyone please try to solve this
thanks
887401

HTTP 403 means you don't have permission to access that URL. Have you supplied credentials?

Exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPExcept

Hi all,
I am getting below error while invoking Siebel web service from BPEL service,
<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
</summary>
</part>
</remoteFault>
</fault
Please help me to resolve this issue.
Thanks,
Santosh M E

Resolved, I was invoking an external Web service which is an Asynchronous 2 way.
Didn't capture the reply back from the Async service.

HTTP 500 Error while login.

Hi Friends,
I have fresh installed R121.1 on 2003 server. just after instalation i checked my application was working fine.
then i shut down my application using adstapal.cmd and did one reboot.
Post reboot i started my DB with it's listner after this as expected DB is working fine. and then started all the services with adstrtal.cmd
Every services are started.
When i was trying to login to application i an getting HTTP 500 Error Below is my steps and services status.
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>adstrtal.cmd apps/apps
ECHO is off.
ECHO is off.
Thu 11/11/2010 10:21 PM
ECHO is off.
ECHO is off.
Connected.
The logfile for this session is located at D:\oracle\VIS\inst\apps\VIS_ora\logs\
appl\admin\log\adstrtal.txt
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adopmnctl.cmd start
script returned:
Thu 11/11/2010 10:21 PM
Starting Oracle Process Manager (OPMN) ...
CALL D:\oracle\VIS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
opmnctl: opmn started
        STATE              : 4 RUNNING
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adalnctl.cmd start
script returned:
ECHO is off.
ECHO is off.
Thu 11/11/2010 10:23 PM
ECHO is off.
The environment settings are as follows ...
ECHO is off.
       ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2
             LOCAL : VIS
        ORACLE_SID :
              PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\te
ch_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre
\bin;D:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\ap
pl\fnd\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\ap
ps\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.
8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unz
ip;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st
\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\app
s\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\o
racle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3
\bin;D:\oracle\VIS\apps\apps_st\appl\cz\12.0.0\bin;D:\oracle\VIS\apps\apps_st\ap
pl\iby\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\pon\12.0.0\bin;D:\oracle\VIS\a
pps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\V
IS\apps\apps_st\appl\cz\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\iby\12.0.0\bi
n;D:\oracle\VIS\apps\apps_st\appl\pon\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl
\au\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_st\
10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps
\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\
jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_st\10.1.3\
appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_s
t\10.1.3\appsutil\jdk\bin;C:\Dot_Net_VC\Common7\IDE;C:\Dot_Net_VC\VC\BIN;C:\Dot_
Net_VC\Common7\Tools;C:\Dot_Net_VC\Common7\Tools\bin;C:\Dot_Net_VC\VC\PlatformSD
K\bin;C:\Dot_Net_VC\SDK\v2.0\bin;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C
:\Dot_Net_VC\VC\VCPackages;D:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;D:\orac
le\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\ad\12.0.
0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\
tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\apps\apps_
st\comn\util\unzip\unzip;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\o
racle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk
\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\Dir\bin;C:\WINDOW
S;C:\WINDOWS\system32;D:\oracle\VIS\apps\tech_st\10.1.3\ant\bin;D:\oracle\VIS\ap
ps\tech_st\10.1.3\ant\bin
   LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib
ECHO is off.
The service "OracleVIS_ora_TOOLSTNSListenerAPPS_VIS" is already started
adalnctl.cmd exiting with status 0
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adapcctl.cmd start
script returned:
Thu 11/11/2010 10:23 PM
Oracle Managed Process HTTP_Server is already running
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adoacorectl.cmd start
script returned:
Thu 11/11/2010 10:23 PM
Oracle Managed Process oacore is already running
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adformsctl.cmd start
script returned:
Thu 11/11/2010 10:23 PM
Oracle Managed Process forms is already running
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adoafmctl.cmd start
script returned:
Thu 11/11/2010 10:23 PM
Oracle Managed Process oafm is already running
exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adcmctl.cmd start
script returned:
ECHO is off.
ECHO is off.
Thu 11/11/2010 10:23 PM
ECHO is off.
ECHO is off.
Thu 11/11/2010 10:23 PM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2005 x86 tools.
APPSORA.cmd exiting with status 0
Starting concurrent manager for VIS ...
The OracleConcMgrVIS_ora service is starting...
The OracleConcMgrVIS_ora service was started successfully.
adcmctl.cmd exiting with status 0
.end std out.
.end err out.
Executing service control script:
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\jtffmctl.cmd start
script returned:
You are running jtffmctl.cmd
Thu 11/11/2010
10:23 PM
"Starting Fulfillment Server for "VIS" on port "9300" ...\n"
The Oracle Fulfillment Server VIS_ora service is starting.
The Oracle Fulfillment Server VIS_ora service was started successfully.
jtffmctl.cmd exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
All enabled services for this node are started.
Check logfile D:\oracle\VIS\inst\apps\VIS_ora\logs\appl\admin\log\adstrtal.txt f
or details
adstrtal.cmd exiting with status 0
ERRORCODE = 0 ERRORCODE_END
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>adapcctl.cmd status
Thu 11/11/2010 10:28 PM
Checking status of OPMN managed processes...
Processes in Instance: VIS_ora.ora.apps.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |    7980 | Alive
OC4JGroup:default_group          | OC4J:forms         |    1936 | Alive
OC4JGroup:default_group          | OC4J:oacore        |    7884 | Alive
HTTP_Server                      | HTTP_Server        |    7828 | Alive
ASG                              | ASG                |     N/A | Down
exiting with status 0
ERRORCODE = 0 ERRORCODE_END
D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>At the botom i have given status of adapcctl.cmd as well
Please Suggest
Bachan.

Hi,
[Fri Nov 12 13:22:04 2010] [error] [client 192.168.100.1] [ecid: 1289596924:192.168.100.1:3020:2668:1,0] Directory index forbidden by rule: c:/oracle/vis/apps/apps_st/comn/java/classes/
[Fri Nov 12 04:08:42 2010] [error] [client 192.168.100.1] [ecid: 1289563722:192.168.100.5:3528:3312:2,0] File does not exist: c:/oracle/vis/inst/apps/vis_ora/portal/favicon.icoThese errors can be ignored.
And Data base is running perfectly fine.
I can query, compile n can do any thing on DB.Have you check the log file for any ORA-XXXXX errors?
i am able to login and after few min it went to same status HTTP 500 Internal server errorAre you still above to access the forms? Is the issue with HTTP server only?
Thanks,
Hussein

HTTP 500 Error while using XML HTTP Port for idoc

Hi,
I am trying to send CRM idocs via XML Http instead of usual t-rfc.
After standard idoc - pi configs i get the below error.
transferring the IDoc by HTTP, the return code with the message '500Error during parsing of SOAP header' has occurred.
In BD87 I get the below error.
The target address was: http://yyyyyy.XXX.local:800X/sap/xi/engine?type=entry
I get the http 500 error as:-
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards
Any idea on how to trouble shoot or resolve this.
Regards,
Anirban

Hi Anirban,
Follow the below links for troubleshooting.
Troubleshooting File-to-IDOC Scenario in XI.
The specified item was not found.
Regards,
Leela

HTTP 500 error when opening "App Server Control" (EM) in OAS 10.1.3.5.0

Hi,
I have some (but not much) experience with OAS and am currently stuck. So hope to find someone who can help me further here.
When i open Oracle Application Server Control from the SOA Suite 10.1.3.5.0 home page i get most of the times an HTTP 500 error.
Initially i got this even when i opened the login page (/em) but worked around this by increasing the ThreadsPerChild from 100 > 250 in the httpd.conf and replacing the loopback adres 127.0.0.1 in the dms.conf for the virtual host configuration to the actual (fixed) ip-address.
The current situation is that when i restart the environment (opmn stopall & opmn startall) i can open the the EM login page.
After logging in om the Enterprise Manager, the page is partly loaded and a HTTP 500 error is shown when i refresh the page.
The apache log files now still shows the following errors;
[Tue Sep 07 15:46:19 2010] [error] [client 10.157.1.68] [ecid: 1283867060:10.150.50.110:10312:9568:5,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://ascontrol (no island or jgroup).
[Tue Sep 07 15:51:20 2010] [error] [client 10.157.1.68] [ecid: 1283867060:10.150.50.110:10312:9568:5,0] mod_oc4j: request to OC4J SOA-WTST:12501 failed: Connect failed
Any hints ?
Kind regards,
Peter

If finally found the cause of the problem, lack of PermGen space for the home instance;
When opening the EM Console most of the times i was able to open the login page, under stress opening this page failed most of the times.
The ascontrol-application.log pointed me in the right direction;
10/09/07 15:26:59.111 ascontrol: Servlet error
java.lang.OutOfMemoryError: PermGen space
When monitoring the PermGen of the home instance, is showed that the system was running out of PermGen space.
Increasing the PermGen size for the home instance in opmn.xml did the trick
<data id="java-options" value="-Xrs -server -XX:MaxPermSize=128M......"

Http 403 error message when connecting to WRT120n router

I recently upgraded to the WRT120n router at home. I quickly connected my desktop computer, my wife's Mac and two Lenovos, but my son's HP Pavilion cannot access the Internet. It returns the http 403 error message. Windows (Vista) and Network Magic tell me the laptop is connected to the router and the Internet, but the browser does not work. Have tried IE, Chrome and Firefox - same result. Have also tried to connect with cable. Hooking up wirelessly with WPA, was no problem, but the browser is unable to access the Internet.
Grateful for any help.

What is the ip address you are getting on the Vista Computer..?
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Wireless Network Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Wireless Network Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

HTTP Transport Error in Net BEans 6.5

Hello,
I am consuming a web service using JAX-RPC. I am trying to log onto a web interface through my program but I am getting the following error:
Feb 6, 2009 1:10:54 PM ttsample.Engine Login
SEVERE: null
java.rmi.RemoteException: HTTP transport error: java.net.UnknownHostException: http; nested exception is:
Logged in...
HTTP transport error: java.net.UnknownHostException: http
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:819)
at ttsample.Engine.Login(Engine.java:77)
at ttsample.Main.main(Main.java:30)
Caused by: HTTP transport error: java.net.UnknownHostException: http
at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:802)
... 2 more
I searched the web and found that this is a proxy setting proble.
I configured apache earlier to use the local host that run the web client.
When I change the http port host and port number and try to login into the web client its giving me page not found error.So I changed the proxy settings to default and then restarted the system and then tried to log into the web client and it worked.
I dont know where i am going wrong.I want to consume the WSDL and log into the web client but i am gettingthe above error.
Anyone's help will be greatly appreciated.
Thank You,
Sravanthi.

Where did you get the address: http://sal006.salnetwork.com:82/bin/lccountrycodes.cgi (shouldn't the 82 be 83 instead?)

HTTP 401 error while connecting SAP PI 7.1 with SOAPAdapter

Hello,
I am trying to call webservice on R/3 system using SAP PI 7.1 but I am getting HTTP 401 error.
Following is the error for more detail:
Message: Server returned error code = 401 for URI : http://sapxx03x:50000/XISOAPAdapter/MessageServlet?channel=:BS_xxxxxxxxxxx_50:CC_xxxxxxxxxxxxx_WSDL_Sender.
same url when I use with SAP XI 3.0 it works fine. It is only giving problem with PI 7.1
I know this issue is related to authentication but what problem I am facing is how to pass the credentical with the url to
resolve this authentication issue? Are there any settings I am missing? or Any other way of doing it?
I have already tried following things to resolve this issue:
1. tried giving user id & password in URL but still having same error HTTP 401.
2. tried one of the SAP note (891877) regarding Netweaver Administration to change ROLE settings but problme still persist.
3. Checked SAP Help settings
4. Did changes to web.xml file to comment the security part and restarted the system
But, Problem still exist.
Please let me know what will be the solution for this issue.
Thanks,
Anand

Hello Abhishek,
Fine I will try using new URL but user id & password are working fine with PI 7.1.
I tried running URL directly and it is working fine and giving following message:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NWxx_xx_xxx/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of $Proxy45_10002
ModuleProcessorRemote not instantiated
Any other pointers,
Thanks,
Anand

SQL Server 2008 Reporting Services HTTP 500 error

Hi Everyone,
I recently tried changing authentication mode in RSReportServer.config, I changed from RSWindowsBasic to RSWindowsNegotiate. After restarting the services, I tried to access the Reports page (which worked before my change), but I was unable to load HTTP
500 error.
I then did what anyone else would do, revert back to the origin config and restart the services. I then tried to access but I got exactly the same error, HTTP 500.
I really dont understand why, I have reverted back to exactly the same configuration that work.
The error messages from the logs are as follows:
rshost!rshost!16ec!01/16/2014-13:33:53:: i INFO: CLR runtime is initialized.
rshost!rshost!16ec!01/16/2014-13:33:53:: v VERBOSE: Initializing Memory Monitoring
rshost!rshost!16ec!01/16/2014-13:33:53:: i INFO: Derived memory configuration based on physical memory as 4193848 KB
rshost!rshost!16ec!01/16/2014-13:33:53:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
rshost!rshost!16ec!01/16/2014-13:33:53:: v VERBOSE: Supported winsock version is 2.2.
appdomainmanager!DefaultDomain!18e4!01/16/2014-13:33:53:: i INFO: Entered managed ServiceMain in DefaultDomain.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing SecureConnectionLevel to '2' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException'
as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException'
as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing AuthenticationTypes to '8' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RSWindowsExtendedProtectionLevel to 'Off' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RSWindowsExtendedProtectionScenario to 'Proxy' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing EnableAuthPersistence to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MemorySafetyMargin to '80' percent as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MemoryThreshold to '90' percent as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing UrlRoot to 'https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsReportManagerEnabled to 'True' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing ReportServerUrl to 'https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxConnections to '2' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing Timeout to '10' second(s) as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing AppID to '(Default)' as specified in Configuration file.
library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing CacheLevel to 'Default' as specified in Configuration file.
resourceutilities!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Reporting Services starting SKU: Enterprise
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server internal url https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server external url https://TEST-SRV-DBA01:4445/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using url root https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: AuthPersistence does not apply to basic authentication.
rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Configuring maxPhysicalCpu=8, minLogicalCpu=0
rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Logical processor per physical processor 1
rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Maximum logical CPU is 1
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server internal url https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server external url https://TEST-SRV-DBA01:4445/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using url root https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: AuthPersistence does not apply to basic authentication.
appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Appdomain:2 WindowsService_0 started.
resourceutilities!WindowsService_0!d30!01/16/2014-13:33:55:: i INFO: Reporting Services starting SKU: Enterprise
library!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Catalog SQL Server Edition = Enterprise
appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: The UserAccountControl value for the service account is 512
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://TEST-SRV-DBA01.company.co.uk:4444/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=http://SSRSReportingPPE.companytest9.co.uk:8081/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4445/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4443/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4443/ReportServer/ on endpoint 2
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4445/ReportServer/ on endpoint 2
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url http://SSRSReportingPPE.companytest9.co.uk:8081/ReportServer/ on endpoint 2
rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://TEST-SRV-DBA01.company.co.uk:4444/ReportServer/ on endpoint 2
appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: The UserAccountControl value for the service account is 512
crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Initializing crypto as user: company\adm.sukh.gidda
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://TEST-SRV-DBA01.company.co.uk:4444/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=http://SSRSReportingPPE.companytest9.co.uk:8081/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://WMSvc-TEST-SRV-DBA01:4444/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4445/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4434/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4434/Reports/ on endpoint 3
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4445/Reports/ on endpoint 3
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://WMSvc-TEST-SRV-DBA01:4444/Reports/ on endpoint 3
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url http://SSRSReportingPPE.companytest9.co.uk:8081/Reports/ on endpoint 3
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://TEST-SRV-DBA01.company.co.uk:4444/Reports/ on endpoint 3
rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\ReportBuilder.
resourceutilities!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: Maximum memory limit is 2097152Mb
rshost!rshost!d30!01/16/2014-13:33:55:: i INFO: Derived memory configuration based on physical memory as 4193848 KB
servicecontroller!DefaultDomain!1d44!01/16/2014-13:33:55:: i INFO: Total Physical memory: 4294500352
rpcserver!DefaultDomain!1940!01/16/2014-13:33:55:: i INFO: Process monitoring started.
library!WindowsService_0!1f70!01/16/2014-13:33:55:: v VERBOSE: Transaction begin.
crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Exporting public key
crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Performing sku validation
crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Importing existing encryption key
library!WindowsService_0!1f70!01/16/2014-13:33:55:: v VERBOSE: Transaction commit.
library!WindowsService_0!1f70!01/16/2014-13:33:56:: v VERBOSE: Transaction begin.
library!WindowsService_0!1f70!01/16/2014-13:33:56:: v VERBOSE: Transaction commit.
dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: EventPolling polling service started
dbpolling!WindowsService_0!1ef4!01/16/2014-13:33:56:: i INFO: HeartbeatThread(EventPolling): heartbeat thread started.
dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: NotificationPolling polling service started
dbpolling!WindowsService_0!1f94!01/16/2014-13:33:56:: i INFO: HeartbeatThread(NotificationPolling): heartbeat thread started.
dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: SchedulePolling polling service started
dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: UpgradePolling polling service started
dbpolling!WindowsService_0!1a54!01/16/2014-13:33:56:: i INFO: PollingMaintenance: Polling started
resourceutilities!WindowsService_0!1a54!01/16/2014-13:33:56:: i INFO: Maximum memory limit is 2097152Mb
rpcserver!DefaultDomain!1f70!01/16/2014-13:33:56:: i INFO: RPC Server started.
servicecontroller!DefaultDomain!1f70!01/16/2014-13:33:56:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS10_50.MSSQLSERVER'
appdomainmanager!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: Appdomain:2 WindowsService_0 initialized.
library!WindowsService_0!1a54!01/16/2014-13:33:56:: Attempting upgrade of MigrateExecutionLog
rshost!rshost!18e4!01/16/2014-13:34:39:: v VERBOSE: AcceptCallback(): accepted new connection pipeline=0x000000000036DC50...
rshost!rshost!1478!01/16/2014-13:34:39:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x000000000036DC50, state=0, IOError=0, node=0.
appdomainmanager!DefaultDomain!1478!01/16/2014-13:34:49:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130343528892811172 started.
appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: i INFO: RS authentication mode is 8; effective ASP.NET authentication mode is Windows. vdir=/Reports.
appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Managed threadpool maxWorkerThread=100, maxIoCompletionThread=100 ...
appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Managed threadpool minWorkerThread=1, minIoCompletionThread=1 ...
appdomainmanager!DefaultDomain!1478!01/16/2014-13:34:49:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130343528892811172 initialized (#1).
rshost!rshost!1478!01/16/2014-13:34:49:: v VERBOSE: Processing request pipeline=0x000000000036DC50, callback=0xace640, callback->pipeline=0x000000000036DC50, id=17077649789136404660, connid=17077649788599533747 ...
httpruntime!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Response header encoding is Unicode (UTF-8).
ui!ReportManager_0-1!1478!01/16/2014-13:34:51:: v VERBOSE: User map'<Users><User><Name>TEST-SRV-DBA01\LocalAdmin</Name><Paths><Path>/Reports/home.aspx</Path><NrReq>1</NrReq></Paths></User></Users>'
rshost!rshost!1478!01/16/2014-13:34:51:: v VERBOSE: HttpPipelineCallback::EndOfRequest(): continue pipeline=0x000000000036DC50.
rshost!rshost!18e4!01/16/2014-13:34:51:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x000000000036DC50, state=2, IOError=0, node=0.
rshost!rshost!1180!01/16/2014-13:34:52:: v VERBOSE: AcceptCallback(): accepted new connection pipeline=0x0000000003631610...
rshost!rshost!1478!01/16/2014-13:34:52:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x0000000003631610, state=0, IOError=0, node=0.
rshost!rshost!1478!01/16/2014-13:34:52:: v VERBOSE: Processing request pipeline=0x0000000003631610, callback=0xace620, callback->pipeline=0x0000000003631610, id=17365880165288116379, connid=17365880164751245466 ...
ui!ReportManager_0-1!1478!01/16/2014-13:34:52:: v VERBOSE: User map'<Users><User><Name>TEST-SRV-DBA01\LocalAdmin</Name><Paths><Path>/Reports/Pages/Folder.aspx</Path><NrReq>1</NrReq></Paths></User></Users>'
ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: Microsoft.SqlServer.ReportingServices2010.RSConnection2010+MissingEndpointException: The attempt to connect to the report server failed. Check your connection information and that the report
server is a compatible version. ---> System.Net.WebException: The remote server returned an error: (404) Not Found.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.ReportingServices.UI.ServerAuthType.GetReportServerAuthentication()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetNewWebRequest(Uri uri)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2010.ReportingService2010.ListItemTypes()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.<ListItemTypes>b__10f()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.ListItemTypes()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: Microsoft.SqlServer.ReportingServices2010.RSConnection2010+MissingEndpointException: The attempt to connect to the report server failed. Check your connection information and that the report
server is a compatible version. ---> System.Net.WebException: The remote server returned an error: (404) Not Found.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.ReportingServices.UI.ServerAuthType.GetReportServerAuthentication()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetNewWebRequest(Uri uri)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2010.ReportingService2010.ListItemTypes()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.<ListItemTypes>b__10f()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.ListItemTypes()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.GlobalLinks.Control_Init(Object sender, EventArgs args)
ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: HTTP status code --> 500
Anyone seen this issue before? Or know why its failing from the logs?
Thanks,
John

Hi John,
HTTP 500 error can occur if there are conflicting authentication settings in the report server Web.config file and the RSReportServer.config file. HTTP 500 is returned if authentication initially succeeds and then the mismatch is detected. In RSReportServer.config
file, make sure the AuthenticationTypes setting as follows:
<AuthenticationTypes>
<RSWindows*/>
</AuthenticationTypes>
In the report server Web.config file, please also check the authentication type:
Authentication=”Windows”
Reference:
http://technet.microsoft.com/en-us/library/ms159778(v=sql.105).aspx
If the issue is persist, please check if the web services URL in web.config file is correct.
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

How to Resolve HTTP 500 error in sharepoint 2013 workflow

Hi guys,
I am new to Sharepoint. I have created a workflow for sending if a document added or edited in a document library. When i added a document i
workflow status shows workflow started. But when checked in the internal status of the workflow it shows as cancelled.
RequestorId: 2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce. Details: System.ApplicationException: HTTP 500 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["132"],"SPRequestGuid":["2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce"],"request-id":["2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 05 Feb 2014 09:18:43 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.Activit
How to resolve this error. It shows http 500 error.

Go to one of your SharePoint boxes, open op powershell and get teh logs around the "SPRequestGUid" you see in your message... Do something like this:
Merge-SPLogFile -path "Desktop\wferror.log" -correlation 2bfd5ec9-1fd1-de92-ccc2-1f2a912c49ce
This will basically grab log files from all boxes ULS logs that have to do with that transaction.
*** not sure how far back it will look depending on your log size, but sometimes I've had to reproduce another error (with a new SPGuid) and then Merge logs with that Correlation...
Once you get this file, you can open it with ULSViewer and then you can filter/sort by Product/Category/ErrorLevel/etc... this will definitely help you determine what the issue is. The key is that SPRequestGuid (which is the "Correlation ID"
that you see when you get SharePoint Unexpected errors to reference the log files...

HTTP response error :Connection reset

Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj Dwivedi

Hi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi

HTTP Request Error

Hi Iam using Flex to display pie chart in my application. Im
getting the pie chart in Mozilla firefox but in IE iam getting Http
Request Error. Iam giving the code what i wrote. Please find. can
anybody help me in this? thanks
mxml file
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="300" height="232" backgroundColor="white"
usePreloader="true">
<mx:Script>
<![CDATA[
import mx.messaging.channels.StreamingAMFChannel;
import mx.charts.series.LineSeries;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.controls.Alert;
import mx.controls.*;
import mx.events.*;
[Bindable]
public var orXmlList:XMLList;
[Bindable]
public var orXml:XML;
[Bindable]
public var orderCount:String = "0";
private function getOrXML():void{
orRPC.cancel();
orRPC.send();
public function handleXML(event:ResultEvent):void
orXml = event.result as XML;
orXmlList = event.result.orderResultsData.order as XMLList;
var orMetaString:String = "orMeta";
orderCount = orXml.orderResultsData[0].orMeta[0].orderCount;
public function handleFault(event:FaultEvent):void
Alert.show(event.fault.faultString, "Error");
]]>
</mx:Script>
<mx:HTTPService result="handleXML(event);"
fault="handleFault(event);" id="orRPC" resultFormat="e4x"
method="POST" url="/global/corpOrderResults.csc"
useProxy="true">
</mx:HTTPService>
<mx:PieChart x="0" y="46.95" id="orPieChart" width="168"
height="126" dataProvider="{orXmlList}"
creationComplete="getOrXML();" showDataTips="true">
<mx:series>
<mx:PieSeries nameField="name" field="count" />
</mx:series>
</mx:PieChart>
<mx:Legend dataProvider="{orPieChart}" x="141.25"
y="56.6" verticalGap="0"/>
<mx:Label id="orInfoLabel" x="0" y="20.95" text="Orders
updated in the last 30 days: {orderCount}" width="283.4"
height="18"/>
</mx:Application>
Text
And my JSp page is:
<div id="flashcontent">
</div>
<script type="text/javascript">
var so = new SWFObject("/global/flash/litigationByNoc.swf",
"mymovie", "400", "200", "8", "#336699");
so.write("flashcontent");
</script>

Hi,
I have checked the logs. I am getting errors like the below:
1.     com.sap.engine.services.servlets_jsp.server.deploy.impl.exceptions.WCEApplicationNotStartedException: The application [sap.com/com.sap.portal.ivs.iviewservice] is configured to have ALWAYS start up mode. Currently it is in STOPPED status - because of this it will not be started implicitly by the Web Container service and any internal operation that needed this application to be running will fail. There are two possible reasons for STOPPED status: 1) The application failed to start during cluster startup. 2) The application is stopped by system administrator.
2.     .info.exception.WD4VCRuntimeException: FAILED: process plan id: generatedBindPlan_CWG_UI action: null
3.     Thread HTTP Worker [2] failed to acquire exclusive lock on client session
But the data is being processed by the code correctly. I tried printing the final values of the o/p and the values are as expected.

HTTP revceiver Error

Similar Messages

Maybe you are looking for