Http to bapi scenario runtime mapping exception

Hi,
I am doing to http to bapi scenario and I am giving the valid sales order number and organization. And It is throwing me below exception when I see it in sxmb_moni.
======================
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_request_sales_bapi_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_request_sales_bapi_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
========================
I have executed individual mappings with sample data and worked fine.
Any inputs on this?
Thanks
Balaji

hi,
you need to test the mapping as shown in my blog:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
to find the error
then correct your mapping and try again
Regards,
michal

Similar Messages

HTTP to BAPI Scenario

Hi Friends
I am doing one scenario in XI and getting an error can anyone please help me
The scenario which I am trying to achieve is this:
                       A Web Client using SOAP protocol calls the BAPI "BAPI_USER_GET_DETAIL" in R/3.
    Configuration
    ==========
1) System Landscape Directory: Created a new product and one software component for it. Created 2 technical systems : One for Web Client and the other for R/3. Created two business systems for these two technical systems. For both the technical and business systems, I added the software component of the product which I created.
2) Integration Repository: Imported the created software component and allowed for the import of RFC's and IDOCs and then imported the structure for "BAPI_USER_GET_DETAIL". I then created a OUTBOUND SYNCHRONOUS message interface, let's call it "MSGINTRF_BAPI". The outbound structure is "BAPI_USER_GET_DETAIL" and the inbound structure is "BAPI_USER_GET_DETAIL.Response".
3) Integration Directory: Created a new scenario and added the two technical systems as services and then created communication channels for them. Since the Web Client is the sender, I used the SOAP adapter for it and for R/3 which is the receiver, I used the RFC XML adapter.
In receiver determination, the sender service and message interface - "MSGINTRF_BAPI" were specified and then the R/3 system was specified as the receiver system.
For interface determination, the sender service, the message interface and the inbound interface (BAPI_USER_GET_DETAIL) were specified.
For receiver agreement, the receiver service, the message interface (BAPI_USER_GET_DETAIL) and the communication channel were specified.
For sender agreement, the sender service, the message interface (MSGINTRF_BAPI) and the communication channel were specified.
I am using XMLSpy for testing the scenario. I have generated the 'Web Service' 'wsdl' file from the Integration Directory. I use XMLSpy to generate a SOAP request using the generated 'wsdl' file. The error which I get back is that "User does not exist". There is a space between the words "User" and "does not exist". You can replicate this error if you were to run this FM in R/3 without passing the value for the parameter 'username'.
          This means that XI is not passing this value to R/3 when it calls this FM in R/3.
What I would like to know is what else should I do in my configuration to let XI transfer the 'username' parameter value, which I pass from my Web client, to R/3 so that I can get the results back?
I hope I have been comprehensive enough to explain the scenario and the problem I am facing...
Please help me in this as i am very new to the XI .
Thanks and Regards

Hi ! Ishika
refer these
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
/message/266750#266750 [original link is broken]
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
check with this for http client
/message/266750#266750 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
http://help.sap.com/saphelp_nw04s/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
Follow this weblog
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
have a look also at these
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/httpToRFCSynchronousScenario-FAQs&
Unable to view payload in HTTP to RFC Scenario
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Pls reward if useful

HTML to Web Service Scenario - Runtime Error Exception

Hi Friends,
I am tryin to do HTML to Web Service Scenario for Validating email for the fWeb Service Email
Validation http://www.webservicex.net/ValidateEmail.asmx?wsdl. While executing the scenario in
Integration Directory there is no error but when sending the payload (Payload contains onl)from SAP
HTML then getting error in SXMB_MONI as
"Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EmailRequest_To_ValidateEmail_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog."
Please guide me for the same.
Regards,
Nitin Patil

Hi,
well it might be the reason that XI is always working with XML but not HTML. It's important that your HTML should be following the XML wellformness. It would be strongly recommanded that you use XHTML but not normal HTML here, because I think XI has no tolerence at all when the inbound HTML is not XML-wellformed.
Try to compose your XHTML like the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title/>
</head>
<body>
some email address
</body>
</html>
Make sure there are no weird characters and empty lines within and before the <?xml
Regards,
Chen

Throw message mapping exception

Hi All,
In message mapping, I am using User defined function for validating 2 fields of the input file. Through this funtion, I want to throw an message mapping exception incase the validation fails.
Can anybody let me know, how can we forcefully throw an exception using java program.
Thanks in advance,
Ashish.

Hi,
You can use something as an incoming schema to validate, see this weblog and at last screen shot you see the result of validations,
/people/jacob.vandborg/blog/2005/11/29/schema-validation-of-incoming-message
You can also see a much detailed validation document here,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
i think you donot need at this level but just for understanding, (This is for incoming file validations)
Or
you may also use node functions to check if values are coming or not, like exists, and if the value do not exist send a blank space to prevent runtime mapping exceptions,
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii point 6
All this can be tried,
All the best,
Anirban.

Http == rfc (bapi) - bapi not created

Hi
I've got an http <==> rfc (bapi) scenario. QoS is Best Effort. I am using SAP's http test tool. After enabling the "synch-logging" I can see two successful rows. I am using the bapi "bapi_master_savedata".
Some weird things:
- no material master data is created.
- The parts of the response message are only "Call Adapter" and "Request Message Mapping", nothing else.
Thanks
Go:khan

Hi
I think you pointed to the right problem.
I haven't written something like that before, but I will try if there is no other solution.
So I don't need any wrapper for a syn. rfc call with SP 14??
But the following article doesn't use any wrapper "/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit ??
Thanks
Go:khan

HTTP to BAPI

Hi,
I am doing HTTP to BAPI. In this one I am following the setps of TBIT - HTTP to BAPI scenario. Now when I compleated I am getting error The requested resource does not exist.. ( MY sender service is correct and all parameters like host,port,client and etc were correct.)
Is there any thing to be changed in the XSD and XSL files.
regards,
Ansar.

Hi,
Where you are getting this error... is it while sending a request to XI, I mean to the HTTP adapter?
If so please check of you are using a proper URL
check out this link for HTTP adapter URL
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
Regards,
Prakash

HTTP 2 BAPI

Hi 2 all,
I am running the HTTP to BAPI scenario ....
My test Html tool for executing the scenario is showing Error Msg on page.
and Error message : Permission Denied is showing..
Help needed ..XI guru's
Regards,

Sorry guys,
you took me wrong....
Scene is : When i am clicking on Send button of Test HTML...A message is coming up at the status bar of Explorer saying "Error in Page".
Regards,

Run-time mapping exception in JDBC Scenario

Hello There,
 We are working on a "Communication between IDOC and JDBC" Scenario where in the IDOC is successfully getting called in SAP XI from an SAP R/3 system. But!, when we try to map the IDOC structure with a JDBC Database structure through a manually created XSD, it gives the following run-time mapping exception :
"During the application mapping com/sap/xi/tf/_RequestMapping_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
The following is the XSD that we have created manually for the Target JDBC database table structure which shows the parent-child relationship of the database and is causing the above stated exception :
<?xml version="1.0" encoding="UTF-8"?>

<!W3C Schema generated by XMLSPY v2004 rel. 4 U (http://www.xmlspy.com)>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
 <xs:element name="ACCOUNT_GROUP" type="xs:byte"/>
 <xs:element name="AUTHORIZATION_GROUP" type="xs:byte"/>
 <xs:element name="CITY" type="xs:string"/>
 <xs:element name="CITY_CODE" type="xs:short"/>
 <xs:element name="COMPANY_CODE" type="xs:short"/>
 <xs:element name="COUNTRY_CODE" type="xs:byte"/>
 <xs:element name="COUNTRY_KEY" type="xs:byte"/>
 <xs:element name="CREATED_DATE" type="xs:short"/>
 <xs:element name="CUSTOMER_CLASSIFICATION" type="xs:boolean"/>
 <xs:element name="CUSTOMER_NUMBER" type="xs:short"/>
 <xs:element name="DISTRICT" type="xs:string"/>
 <xs:element name="FAX_NUMBER" type="xs:int"/>
 <xs:element name="FIRST_NAME" type="xs:string"/>
 <xs:element name="GROUP_KEY" type="xs:byte"/>
 <xs:element name="HOUSE_NUMBER" type="xs:date"/>
 <xs:element name="INDUSTRY_KEY" type="xs:byte"/>
 <xs:element name="INTIAL_CONTACT" type="xs:byte"/>
 <xs:element name="LAST_NAME" type="xs:string"/>
 <xs:element name="LOCATION_NUMBER" type="xs:string"/>
 <xs:element name="NAME_PERSON" type="xs:string"/>
 <xs:element name="POSTAL_CODE" type="xs:int"/>
 <xs:element name="REGION" type="xs:string"/>
 <xs:element name="REGIONAL_MARKET" type="xs:byte"/>
 <xs:element name="TELEPHONE_NUMBER" type="xs:long"/>
 <xs:element name="VENDOR_ACCOUNT" type="xs:byte"/>
 <xs:element name="resultset">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="row"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="row">
 <xs:complexType>
 <xs:choice maxOccurs="unbounded">
 <xs:element ref="CUSTOMER_NUMBER"/>
 <xs:element ref="COUNTRY_KEY"/>
 <xs:element ref="FIRST_NAME"/>
 <xs:element ref="LAST_NAME"/>
 <xs:element ref="LOCATION_NUMBER"/>
 <xs:element ref="AUTHORIZATION_GROUP"/>
 <xs:element ref="INDUSTRY_KEY"/>
 <xs:element ref="GROUP_KEY"/>
 <xs:element ref="ACCOUNT_GROUP"/>
 <xs:element ref="CUSTOMER_CLASSIFICATION"/>
 <xs:element ref="VENDOR_ACCOUNT"/>
 <xs:element ref="REGIONAL_MARKET"/>
 <xs:element ref="INTIAL_CONTACT"/>
 <xs:element ref="COMPANY_CODE"/>
 <xs:element ref="CREATED_DATE"/>
 <xs:element ref="NAME_PERSON"/>
 <xs:element ref="CITY"/>
 <xs:element ref="CITY_CODE"/>
 <xs:element ref="COUNTRY_CODE"/>
 <xs:element ref="DISTRICT"/>
 <xs:element ref="FAX_NUMBER"/>
 <xs:element ref="HOUSE_NUMBER"/>
 <xs:element ref="POSTAL_CODE"/>
 <xs:element ref="REGION"/>
 <xs:element ref="TELEPHONE_NUMBER"/>
 </xs:choice>
 </xs:complexType>
 </xs:element>
</xs:schema>
IS THERE ANY OTHER WAY OF ACHIEVING THE ABOVE TASK OF AUTOMATICALLY GENERATING THE REQUIRED DESTINATION STRUCTURE ON THE JDBC TARGET SYSTEM SIDE ?. PLEASE ADVICE ASAP.
REGARDS ......
K. Venkat!.

Try setting the classpath properly. It seems the runtime evironment is unable to find the compiled class files. Nothing else is wrong.
--Anil

Cannot create HTTP client Exception in Http -- XI -- RFC scenario

Hi,
We are testing Http --> XI --> RFC scenario
While testing this scenario from RWB we are getting following error message in the SXMB_MONI logs:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Cannot create HTTP client (exception 1)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Following is the info from the Trace:
<Trace level="1" type="System_Error">cl_http_client exc = argument_not_found</Trace>
We have tried following things:
1. In SICF we made sure the /default_host/sap/xi/adapter_plain is active
2. Applied SAP Note: 716739
Any response will be greatly appreciated.
Thanks,
Paresh

Hi UDO,
Thanks for your reply. The error was gone when I tested again this morning. I am guessing it must be the SAP Note 716739 that we applied and might not have refreshed the cache.
I am still intereseted in confirming what exacly fixed this issue.
As per your suggestion, I looked at the left Nav bar and the error was at the "Call Adapter" step. Even in the log message it says the same. The reciever/interface determination and mapping were successfull. I could successfully test the scenario in the integration directory.
Here is what the 716739 Note said:
Symptom
If you call the Integration Server from a sending Integration Engine (proxy), the following error message occurs:
Category = XIServer
Area = INTERNAL
Id = CLIENT_CREATE_FAILED.
In transaction SXMB_ADM, you used the Configure Integration Engine function to enter a URL of the type http://<host>:<port>/sap/xi/engine?type=entry instead of a URL of the type dest://<name>.
Other terms
SICF, SXMB_MONI, SXMB_ADM, XI
Reason and Prerequisites
You have configured the communication route from the sending proxy (Integration Engine) to the Integration Server using the URL of the type
http://<host>:<port>/sap/xi/engine?type=entry and have saved the logon data on the Integration Server in the Service
/sap/xi/engine (transaction SICF).
A program error has occurred: the communication log is not correctly set when the HTTP client is set up.
Solution
The problem is eliminated with SAP_BASIS Support Package 2. To eliminate the problem, you can use an URL of the type dest://<name>, where <name> refers to the name of a HTTP destination that you have maintained with transaction SM59.
Now, I was not using the proxies but Http post to XI. Do you guys also think this might have fixed my issue?
Thanks,
Paresh

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

Reg http to jdbc Scenario

Hi all,
I am trying to execute a synchronous Http to Jdbc Scenario using MS Access table as my back end.
In design part ,I have followed the steps like
1. Created a http req ,jdbc req, jdbc response ,and then http response in Data types and the in Message types.
2.Created Outbound MI with http req and http response as input and output messages respectively,then Inbound message interface with jdbc req and jdbc response as input and output messages respectively.
3.In Message mapping with Http req and jdbc req as request mappings and jdbc response and http response as Response mappings following the Action and access Steps.
Thats Fine with design part
IN Configuration Part, Since it is a Http Sender ,i didnt create any sender agreement and sender communicatin channel.
Then Configured Jdbc adapter properly and i am able to access my table with that.
While Executing ,I can find that my message is sent in Runtime workbench and can find that Jdbc adapter is Running by showing green flag.
I was trying to send an empid of a table as key and expecting to retrieve the complete row of the corresponding key.
But I could not find the response even though everything is fine with XI.
Where Could be the problem ,where can I see the response from jdbc adapter .
Please help me out in solving this .
Thanks and Regards,
Kalpana

Hi Kalpana,
Can you check this weblog
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
This should help you...
Check the Response Mapping,also you have one IM with Reqest and Response mapping...
Also if you have SP16 then you can have sender CC for HTTP also ...
Regards,
sridhar

SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

HTTP connection to ABAP Runtime failed. Error: 403 Forbidden

Hi ALL
We where testing our scenario using the Test Configuration in Integration Engine.
We have come across the following error in the second step of Determining the receiver.Here is the error message we received...
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: _http://SAPXDV01.sap.client1.local:8000/sap/xi/simulation?sap-client=150 User: PIDIRUSER
Please, do let us know ... if you have received similar error & what solution can be applied...
Your help is greatly appreciated!
Thank you,
Patrick

Hi,
Go through this thread...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0f00c890-0201-0010-beb2-c96050edc426
JCO_COMMUNICATION_FAILURE
Error in XI server: JCO_COMMUNICATION_FAILURE in Message Mapping
This might help you..
Regards,
Divya

HTTP 401 - UNAUTHORIZED. in HTTP TO RFC scenario

Hi Friends,
I am beginner of XI and trying out HTTP TO RFC scenario referring the blog:
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
but got stuck while sending a message from runtime workbench.
I am getting HTTP 401 - UNAUTHORIZED. Please dont mind if it silly doubt. I am beginner to XI and badly stuck up here.
Also to let you know -
In Runtime Workbench > Integration Server > Integration Engine XI1. To the left there is yellow triangle but all others (BPE XI1, Mapping Runtime xi01 and Adapter Engine XI01)
were green. Is Integration Engine XI1 should also be green? is that causing a problem?
Please give your valuable suggestions.
Looking forward for your response.
Thanks and Regards
Sam

Samuel,
Check out your RFC adapter parameters / user id and password.
Also check whether userid used in RFC adapter has Authorization to run RFC on Remote system.
Nilesh

Simple xml file mapping exception

How come a file with this content works fine:
<?xml version="1.0" encoding="utf-8" ?>
<ns:Data xmlns:ns="http://natoil.com/xi/XI/TestFile">
<Name>Joe</Name>
</ns:Data>
But a file with this content gives a mapping exception:
<?xml version="1.0" encoding="utf-8" ?>
<Data>
<Name>Joe</Name>
</Data>
How can I get the second version to work? What am I not understanding?
thanks-

Hi Henry:)
to achive your scenario:
1. go to the Message Type of your file message (repository)
2. remove XML namespace - you can leave it empty
3. check if your mapping based on this message type works - now it shouldn't show the namespace when you go to Source Document View of the Source message
4. recreate message interface
5. activate it all again
6. now your scenario without the namespace should work:)
Regards,
michal
Message was edited by: Michal Krawczyk

Http to bapi scenario runtime mapping exception

Similar Messages

Maybe you are looking for