Hyperlink Bag : Passing two Parameters to Hyperlink bag

Hi,
Pls let me know if any one has worked on how to Pass two parameters to Hyperlink Bag in MSA 5.0.My code is working fine with single Parameter but when I pass two parameter it is throwing an error.
Appreciate if some one can share a code for the same.
Thanks in Advanace.
Thanks and Regds
Harish

Hi Ramakrishna,
Thanks for your prompt reply. I have gone through this document. My requirement is different than what's stated in the document. The users filter their records in the VC application by using more than one filter and press the button called 'Open Query' button. The system then takes them to WAD. The WAD should be able to set the same filter value/s that they select in VC application. But at the moment, it passes only one parameter to WAD regardless of how many filter values that users select in VC. Please suggest on this matter.
Thanks.

Similar Messages

How to pass two parameters in one url?

the tutorial teaches me to use
/faces/Details.jsp?personId=#{currentRow.value['PERSON.PERSONID']}
to pass one parameter.
How can i pass two parameters in one url?
/faces/Details.jsp?personId=#{currentRow.value['PERSON.PERSONID']}&personName=#{currentRow.value['PERSON.PERSONNAME']}
is not right.

The '&' character needs to be escaped, lest it be interpreted by the application server as a separator character in the HTTP query string. Instead of '&', try '%26'.
// Gregory

Pass two parameters using extraParams attribute in protlet:createWebFlowURL tag

Ho do I pass two parameters using extraParams attribute in portlet:createWebFlowURL?

<portlet:createWebFlowURL event="RTFM" extraParams="read=manual&do=you">
"Linda" <[email protected]> wrote:
>
Ho do I pass two parameters using extraParams attribute in portlet:createWebFlowURL?

How to pass two parameters to sql query

I try to create a sql script to update two columns in one table. I want to set it as parameter. When people execute this sql script, they need to pass parameter into sql query, then query will be executed successfully. The problem is I am only able to pass one parameter. If set two parameters in one line code, it will get ORA-00933 errors. Please advice me where I was wrong. The code is simple and like this:
update MY_TABLE set year = &year AND month = &month where application_type = 'xxxx';
If I only have: update MY_TABLE set year = &year where application_type = 'xxxx'; It works. If I set two parameters to pass value. It will get error.

Hi,
When you UPDATE two or more columns in the same statement, use ',' instead of 'AND' to separate them:
update MY_TABLE
set     year = &year
,       month = &month
where   application_type = 'xxxx';The correct syntax for all SQL statements, including UPDATE, can be found in the [SQL Language manual|http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10008.htm#sthref9598].

Passing two values in two different views using view criteria in adf bc

I have two tables. Message and MessageProperties. Message table is connected with itself as same as Employee table of HR. Means a Message can have various child message. MessageProperties contains the message properties. A message can have various properties. I want to show the message only if it has a particular value in MessageProperties,then its properties,its child message. If its child message have the same value in MessageProperties,then it shows that. Likewise it should give me a tree structure with its all properties.
When I am hardcode the value then its shows fine.
SELECT Message.MESSAGE_ID,
Message.MSG_CONTENT_ID,
FROM MESSAGE Message, MESSAGE_PROP MessageProp
WHERE (MessageProp.Message_Id=Message.Message_Id) AND ((MessageProp.Key='From' OR MessageProp.Key='To') AND (MessageProp.value='B'))
But when I use the Bind variable in view criteria then I am not able to achieve this.
1. How to do that in adf bc and how to link message and messageprop with this condition?
2. How to pass two parameters in serviceinterface FIndViewCriteria method i.e. messageId and value so that it will show only that message having that value?

Thanks Timo,
It helps me a little bit.
It only shows me the parent message id and its properties. But it is not showing its child message id and its properties.
Let me explain you step by step what I have done.
1> I have created a view MessageView with two entities i.e Message and MessageProp and include the value attribute of MessageProp in it.
2> I have created the default MessagePropView from MessageProp Entity.
3> In MessageView I have modified the query which you have given.
4> I have created the Bind variables.
5> I have created a view criteria and in that view criteria I have included Message_Id=:Bind_MessageId and Value=:Bind_Value.
6> I have created an association connecting Message.Message_Id and Message.Parent_Id(1 to * cardinality) because a message can be a parent of many messages.
7> I have created a viewlink between Message and MessageProp using Message_Id.
8> I have created a view link between Message and Message using the association which I have created in step 6.
9> I have created the Application Module. In that,my Data Model looks like
---MessagePropView2
---MessageView1
---------MessagePropView1
---------MessageView2
10> Then I have created the service interface. In service interface view instances,I include these two view and select the GetByKey operation from basic operations.
11> From View Criteria find operations I have included the view criteria which I have created in message view in step 5.
12> Then I run the AppModuleServiceImpl.java and select the view criteria operation which I have created in step 11.
13> There I find two bind variables i.e. Bind_MessageId and Bind_Value. I give the values there.
But it checks whether that message Id(Bind_MessageId) which I have given have that value(Bind_Value) or not. If it has then it shows only that message along with its properties but it is not showing me its childs and their properties.
I want to show only those child message who have the MessageProp.value as (Bind_Value).
I hope you understand with the scenario.
I'll be very thankfull to you if you help me to do this.
Rohit.

Passing Action Parameters to R3

Hi Experts,
I have one radio button by index with one action attached to it. I have to pass two parameters "YES"
and "NO" to R3 system. And there should be a "if" condition on which parameter i am passing to
backend.
Please provide me the source code for this.

ok

Use hyperlink to open another page , and pass some parameters to that page

Hi
Thank you for reading my post.
How i can use hyperlink to open another jsp file in a new window meanwhile pass some parameters to it.
for example i need something like this :
http://127.0.0.1:8080/myProj/faces/Viewmessage.jsp?messageID=10
i can not use session bean because i must open that in a new window and use hyperlink not Action
Thank you

I tried the following in the equivalent of your Viewmessage (page bean):
        ExternalContext eContext = FacesContext.getCurrentInstance().getExternalContext();
        String text = "Parameters: ";
        Iterator it = eContext.getRequestParameterNames();
        Map requestParams = eContext.getRequestParameterMap();
        while (it.hasNext()) {
            String key = (String)it.next();
            String value = (String)requestParams.get(key);
            text += "; " + key + " = " + value;
        staticText1.setText(text);That works as expected when you reach that new page via a hyper link.
The session object is also the same as in your `old' window. So be careful about synchronization!
I hope this helps.
-- Marco

How to pass 2 parameters in a hyperlink?

Hi,
I have a jsp form:
<form name="form1" action="/servlet/ShoppingServlet" method="get">
     <input type="radio" name="productid" value="1">Solitaire Classic / 4.50<br/>
     <input type="radio" name="productid" value="2">Bingo / 3.95<br/>
     <input type="hidden" name="cmd" value="ADD">
     <input type="submit" value="Purchase">
</form>It has a button to submit the form. It passes 2 parameters: productid and cmd's values to ShoppingServlet.
If I use a hyperlink text, how can I pass 2 parameters?
<a href=\"/servlet/ShoppingServlet?productid=" + ProductID + "\">Add this item to cart</a>How can I pass the hidden variable "cmd" in the above hyperlink?
Thanks

<a href="\"/servlet/ShoppingServlet?productid=" + ProductID + "&cmd=ADD\">Add this item to cart</a>

Passing multiple parameters between two report portlets on the same page

Hi,
I want to pass multiple parameters between two report portlets on the same page.
I have been succussful passing a single parameter between two portlets. The
following are the steps :
(1) Created first report based on the query
SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
(2) Created 2nd report
select * from EMP where DEPTNO = :dept_code
(3) Added pl/sql code before display page on the 2nd report
portal30.wwv_name_value.replace_value(
l_arg_names, l_arg_values,
p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
et_value('dept_code'),10)));
(4) Created a page and added these reports as portlets.
Sofar it works fine for one parameter (deptno) . Now I want to add one more
parameter say empno to my first report query and would like to pass both the
parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
Thanks
Asim

Hi,
You will have to do the same thing
The select will be like this
SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
FROM EMP
In the additional plsql code do the same for empno like this
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
Thanks,
Sharmila

One parameters should pass two Infotypes at different times

I have two Infotype 0014 & 0015 which needs to be passed to the Class Z_CUSTOM_CLASS method CHECK_EGLIBILITY, Can any body help me in passing these Infotypes at different times but only through One Parameter ( IMPORTING or changing ) .
I need to know the TYPE or LIKE or Type Ref to for that Par1 ?
I dont want to specify two parameters each defined based on the structure of P0014 or P0015.
Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
importing
par 1 = 0014
or
Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
importing
par 1 = 0015
the class should be able to process both infotypes, the developer who uses this method would be given Privilege whether to pass 14 infotype or infotype 15 depending on situation.
it would be of great help if you can show some sample code.

You can use PRELP structure to type this parameter. This would work similary to customer exits ZXPADU01/02
data p0014 type p0014.
data innnn type prelp.
"before passing to method cast it to PRELP structure
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP
EXPORTING
PNNNN = p0014
IMPORTING
PRELP = INNNN.
"then pass it to method
Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
importing
par 1 = innnn. "type PRELP
"in method cast it back to either p0014 or p0015
data: p0015 type p0015,
         p0014 type p0014.
case innnn-infty.
when '0014'.
   CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
     EXPORTING
       PRELP = INNNN
    IMPORTING
      PNNNN = p0014.
   "your coding here
when '0015'.
   CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
     EXPORTING
       PRELP = INNNN
    IMPORTING
      PNNNN = p0015.
   "your coding here
endcase.
Regards
Marcin

Is it possible to pass Query parameters between two XLF's

Hi,
I have a parent dashboard (.xlf) and i'm trying to launch another .xlf (child) from the main dashboard using OpenDocURL.
Is it possible to pass Query Parameters from parent to the child using OpenDocURL ?
If not , how we can do it ? . I don't want to use SWF loader to load the child dashboard.
I'm using SAP Dashboard 4.1 SP4.
Thanks,
Shiva.

Hi Permisindo,
I tried the approach suggested in the blog, but the parameters are not being passed.
I have a master xlf and a child swf. I used swf loader to load the child and pass the paramters.
Here is the URL -
http://<Server>:8080/BOE/Xcelsius/opendoc/documentDownload?sIDType=CUID&iDocID=<doc id>&sKind=Flash&Fac=All Departments&RoomGroup=All Rooms
I created the flash varibles(Fac , RoomGroup) in the child swf which i mapped to the respective query trigger cells.

Issues passing drillthrough parameters from a multi-level tablix in SSRS 2008 R2

Hello,
I am really struggling with trying creating a drillthrough report that starts with a matrix (tablix) and passing those parameters. I am using SSRS 2008 R2.
Here's my scenario:
I have a matrix that has mulitple levels where you can drill down. Here an example with all the levels open:
Active
Term
Leave
Total
128
88
121
United States
110
80
85
New York
65
30
57
Manhattan
10
6
9
Buffalo
20
23
4
Albany
35
1
44
Texas
45
50
28
Dallas
40
30
22
Houston
5
20
6
France
18
8
36
Centre
18
8
36
Blois
7
2
8
Druex
6
1
15
Tours
5
5
13
I want to drillthrough to another report - Detail Report. As I understand it, I would click the 65 for New York and I would see the detail for the 65 Active people. If I click the 2 under Blois, I would see the 2 terminated people in Blois. My understanding
for this to work, the Detail Report would need a a parameter for each of the level possibilities in the matrix that I could click: Country, State, City as well as the Status (Active, Term, Leave).
While I understand about passing parameters, what I don't understand is how to pass the parameters if they are blank. Let's say I clicked 65 for New York, I would need to pass State = New York Status = Active. But the remaining parameters (Country
and City would be null). I know Country doesn't need to be Null in this case.
My Detail Report has the parameters defaulted to Null, but whether I put the parameters in a Filter for the dataset or in the query itself, I cannot get it to ignore the Nulls.
As a crazy work-around (I think) I can put in the Where of the query something along the lines of: this:
and (a.Country in (@paramCountryCode) or NULL in (@paramCountryCode) )
and I would need to do that for each parameter. Usually I have to use 'ALL' instead of NULL, I'm note sure why.
Additionally, in the Report Action of the Main Report, I need to pass those parameters for each level and their Status. I am also not clear whether or not I need to put in all the parameters on each of the levels (Country, State, City) of the matrix. And if
I do, do I need to make the expressions an IIF statement stating whether or not they are In Scope?
All the examples I was able to find, only showed one or maybe two parameters being passed. Doing the way I am trying, seems convoluted, error-prone and tedious. I really hope that I am wrong.
Is there a better way to approach drilltrough reports from a matrix when there are multiple levels?
Thank you for the help.
~J

Hi Jenna_Fire,
According to your description, you have a matrix contains total for each group on each level. Now your requirement is, when you click on any number (data field or total), it will go to the detail report which returns all the detail information of the people
within the group scope. For example, if you click on the total of Active users in United States, it will return the detail information of Active users in New York and Texas. Right?
In this scenario, we should set the parameter (@Country, @State, @City) allow multiple values in both main and detail report. And in Default Value (@Country, @State, @City), query out all distinct values. In the textbox which contains
those total values, when set use these parameters to run the report, we only need to pass the parameters of parent groups. For example, if we click on the total of Active users in New York, we only need to pass Country, State, Status to detail report, and
in the detail report, the City parameter will use all distinct values (Default Values) because we don't pass the City parameter. We have tested this case with sample data in our local environment. Here are steps and screenshots for your reference:
1. Create parameter Country, State, City and Status in both main report and detail report. Set both Available Value and Default Value get values from query (Create a dataset for each parameter, use "select distinct [column] from [table]" as query). Set allow
multiple values for parameter Country, State and City in both reports.
2. In corresponding textbox, pass appropriate parameters in go to report Action.
4. Filter data in detail report (in where clause or using filters).
5. Save and preview. It looks like below:
Reference:
Using Parameters to Connect to Other Reports
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Passing two variables in the body of the URL using the go to detail page SB in ASP

Hi all,
Would appreciate your assistance with the following, I'm
trying to set up a go to detail page sb that passes two variable in
the body of the URL rather than the standard one.
The code i've tried is -
<td><A HREF="gggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>&"PCL1ID=" +
othermenutwo.Fields.Item("PCL2PC1ID").Value
%><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></A></td>
Where the PCL1ID and the PCL2ID are the variables
The normal code generated by the go to detail page sb with
one variable is -
<td><a href="ggggggtest.asp?<%=
Server.HTMLEncode(MM_keepNone) + ((MM_keepNone!="")?"&":"") +
"PCL2ID=" + othermenutwo.Fields.Item("PCL2ID").Value
%>"><%=(othermenutwo.Fields.Item("PCL2Description").Value)%></a></td>
Unfortunatley my code tweaking isn't working as the second
variable isn't being sent, any help would be gratefully appreciated
Thanks

Instead of using DW's 'go to detail page' option, simply set
up the link the manual way in DW using the Link browser. Select the
file you want to link to and then use the parameters button at the
bottom of the 'Select File' dialogue to set the parameters to be
passed with the link. You can then manually set the name of the
parameter to be passed and then select its value from a recordset.
The key thing is that you can set as many parameters as you like,
so you can set both the parameters you want.
On the detail page you then filter by the parameter name you
chose (or both).
Personally I always code links this way rather than using the
go to detail page option as you get much better control of what is
going on.

How To Pass Multiple Parameters In URL

Hi All,
I have a requirement to pass two paramaters to the URL which is expected to open a report with filtered data.
The context is, I have two reports 1. mainreport 2. subreport.
The mainreport provides a link ( which is TestcaseId ) which on clicking opens the subreport.
In my case the TestcaseId can have duplicates.So i wanted to pass the TestPlan name which helps me filter the data specific to the testcase which is clicked.
Expectation: I want the TestcaseId link to pick up the TestPlan name too when clicked and present the filtered data in sub report.
Note: The TestcaseId and TestPlan name are dynamic and should be picked from the main report.
I already have the report configured to pick the TestcaseId and now would like to know how do i pass TestPlan name as well to the URL.
Please help me with this.
Thanks,
Shekar

Hi Bipuser,
Thank you for your points.
I have URL with both the parameters defined in it.
Let me explain my requirement in detail.
My main report displays the contents in a table like the example below
Test Case Id     Test Plan
TC_1.1     ACR758TripReport
TC_1.2     ACR758TripReport
TC_1.3     ACR758TripReport
TC_1.1     ACR539
The test case ids are displayed as links and on clicking will open the subreport with detailed steps.
Considering the example above. When i click TC_1.1 which is appearing twice in the table, The subreport should fetch only steps specific to the test plan in the same row and not all.
So,To filter the data, I wanted to pass the test plan name to the URL.
Can you list out the steps in detail to achieve this.
Note: User clicks only on Testcase id link but the URL should pick testcaseid and testplan name to fetch the data.
Regards,
Shekar
Edited by: user12210094 on Apr 26, 2012 2:24 AM

Pass Checkbox Parameters from HTML Form to a stored procedure

I'm still looking for a solution to my forms problem. FYI, I'm not using Applications Express to build my application--I'm using straight PL/SQL. I need to know how to pass checkbox parameters from my Web form. I'm allowing folks to select one or more checkboxes on a form that will call a delete function to delete the selected records. What I read in Oracle's "Database Application Developer's Guide - Fundamentals" isn't helpful to me. If someone would point me to some examples, maybe I could see what I'm doing wrong. Here's what was written in "Database Application Developer's Guide - Fundamentals":
All the checkboxes with the same NAME attribute make up a checkbox group. If none of the checkboxes in a group is checked, the stored procedure receives a null value for the corresponding parameter.
If one checkbox in a group is checked, the stored procedure receives a single VARCHAR2 parameter.
If more than one checkbox in a group is checked, the stored procedure receives a parameter with the PL/SQL type TABLE OF VARCHAR2. You must declare a type like this, or use a predefined one like OWA_UTIL.IDENT_ARR. To retrieve the values, use a loop:
CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
AS
BEGIN
FOR i IN 1..checkboxes.count
LOOP
htp.print('<p>Checkbox value: ' || checkboxes(i));
END LOOP;
END;
SHOW ERRORS;

I'm not sure I understand what your issue is.
If your web form has the following checkboxes defined all with the same name:
<input type="checkbox" name="attrib" value="1">one</input>
<input type="checkbox" name="attrib" value="2">two</input>
<input type="checkbox" name="attrib" value="3">three</input>Then you would create and register a procedure to handle the form submission that has a parameter with the name attrib of type owa_util.ident_arr e.g.:
create or replace procedure handle_form(attrib owa_util.ident_arr) as
iter number;
begin
for iter in attrib.first .. attrib.last loop
    -- do something with attrib(iter)
end loop;
end;
/Now the one problem with this handler (or any form handler for that matter) is that if the user selects none of the check boxes, or no value for any of the expected parameters, the handler would be called with some parameters missing or with out any parameters passed to it, and the call will error out.
To get around that you need to provide default values for all the parameters passed to your handler including the ident_arr parameters, however with ident_arr parameters that's difficult to do with standalone procedures. If you place your procedure in a package you can define package level variables of the appropriate types that can be used as default values:
create or replace package my_web as
empty_arr owa_util.ident_arr;
procedure handle_form(attrib owa_util.ident_arr := empty_arr);
end my_web;
create or replace package body my_web as
procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
    iter number;
begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
end;
end my_web;
/now when you hit the situation where the user doesn't select any check boxes, the call to handle_form won't err out due to missing parameters, and the empty_arr won't have any elements to iterate over so the loop in the procedure body will be fine and you will be able to retrieve each selected check box value from the attrib array when you iterate over it.

Hyperlink Bag : Passing two Parameters to Hyperlink bag

Similar Messages

Maybe you are looking for