I added extension: Print Friendly initial rev72.1 & Print/Print Preview 0.9 but they don't appear on the add on bar. How can I use these two?

My OS is Windows 7 and I recently upgraded to Firefox 23.0.1 and then installed the extensions: Print/Print Preview 0.9 and Printfriendly initial rev 72.1. When I go to the add on manager they are listed and not disabled. Under Toolbars, the following are selected: Menu Bar, Navigation Tool Bar, Bookmarks Tool Bar, Add-On-Bar. I don't see any of my Extensions on the Add-On-Bar. At the bottom left of the browser window appears an "x" for closing the Add-On-Bar. There is nothing else showing.

Print/Print Preview uses and appends to the default Print button that comes with Firefox. If you don't have that button, use the '''Restore Default Set''' button in the lower-right corner of the Palette.
As far as Print Friendly, the AMO download page says that button is placed on the Add-on Bar by default. If it isn't there maybe "Restore ...." will fix it, and if not I would suspect a compatibility issue.
Beyond that I can't help you, as I use the Print Edit extension which works fine with Print/Print Preview . I don't like Print Friendly due that extension using their website instead of doing the "editing" within the users browser. Potential security issues for me.
Note, I have tried the Print Friendly bookmarklet which works very much like their extension, and after examining the code and having a person who I consider well-versed with JavaScript look at it - I decided to use Print Edit instead.

Similar Messages

I have "ghost" events on my printed calendars repeating daily after the original event. How can I delete these as they only appear on the printed calendars and not on the on screen version?

I have "ghost" events on my printed calendars repeating daily after the original event. How can I delete these as they only appear on the printed calendars and not on the on screen version?

I had a similar situation. My credit card bill shows a charge on Sept 8 and Sept 9, both for $55.99. I called Apple but they said that I was the victim of identity theft so I cancelled my credit card. They have not refunded my money.

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

How do i get an extension to appear in the add-on bar?

I am new to Firefox and have downloaded the BBc news extension and the add-on bar extension yet am unable to see it in the add-on bar

Is this the exact add-on you have installed?
https://addons.mozilla.org/en-US/firefox/addon/latest-bbc-news/
If so, if you look at the first screenshot it shows the BBC News button on the Navigation Toolbar, where it should appear in Firefox 29 since the Add-on Bar was removed. Using an Add-on Bar extension probably won't automatically place that button on the "restored" Add-on Bar.
Beyond that, you may need to contact the developer of that Add-on for help. Another user mentioned that button being lost all the way back in February, here: http://www.redrobe.com/mike/bbc-news-add-ons-for-firefox-and-chrome/

I have an iPAD mini (4?), everything else in the house is windows. I want to print (using a Canon MF3010), aand also sned Facetime views to the TV, which is pre HDMI. How can I do these two things?

I have an iPad mini 4; how do I print to a Canon MF 3010?
How do I send ANYTHING TO A PRE HDMI TV?
thanks

For Printing, after checking this page:
AirPrint basics
http://support.apple.com/kb/ht4356
It appears your printer is not Airprint compatible. In fact it appears as though your printer is not Wireless even. So you will be limited to sharing applications installed on your Windows computer.
Try this guide and see if it works for you.
http://tweaks.com/windows/46495/enable-ios-airprint-support-on-windows/
Basically you'll need to find an application that can share the printer out to your wireless network using the AirPrint protocol which is what iPads use to communicate with printers.
For the second part of the question:
The short answer is you won't be able to do it directly. To view facetime on your Tv you need to mirror your iPad's screen. either through the Av Digital adapter, which connects through HDMI to the TV, or through an Apple TV which only has HDMI output.
So your only option is to get an HDMI to composite converter to plug either between the Apple Tv and the TV, or between the Digital AV adpater and the TV.
Something like this:
http://www.amazon.com/ViewHD-Universal-Composite-Converter-Standard/dp/B0080KN18 K
Apple TV
http://store.apple.com/us/browse/home/shop_ipod/family/apple_tv
Lightning Digital Av Adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
Oh, and an iPad 4 and an iPad Mini are 2 different products. One is the normal Sized iPad while the other one is the smaller sized version.

Ive had a lap top from a friend, she cleared everything off it but ive downloaded itunes and all her music has appeared in the itunes library. How can i delete her music from the itunes library?

ive got a laptop from a friend, she cleared everything off it. ive downloaded itunes and for some reason all her music has appeared in the library. How do i delete her music from the itunes libary so i can add my own music?

In iTunes, select the music you want to delete (⌘+a to select all) and hit Delete on your keyboard.
Also delete the music files in Finder. Also make sure you have your own Apple ID and iTunes account and logged in.

Added photos to the video timeline but they don't display.

I have added some photos to the video timeline but they don't display. The end of the last clip is frozen and then the next clip starts once the time for the photo display has elapsed.
A previous photo that I'd inserted in the project previously DOES run correctly. I suspect it may be to do with the fact that I've used cutaways in part of the video. However, where I'm inserting the photos is not in a section where there is an existing cutaway.

It would appear that it's a bug with iMovie. It won't let me add new photos to the duplicated project, but it WILL let me add them to the original project.
After searching the Discussion forums, it would appear that it has affected other users; some have used 'workarounds', but the solution doesn't always work for all. Hope Apple can address it.

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

Please study this, then come back with more specific questions
Learn Photoshop Elements 12 | Adobe TV
Learn Photoshop Elements | Adobe TV
Use of the tools is pretty much the same in all versions of the program.
"Edit" is a menu item in Photoshop Elements Editor. Don't you see this?

How can I use PowerPivot tables like Excel tables -- printing, etc.?

I can't seem to find any information on this anywhere, and even more surprisingly, no one else seems to have even asked this question...
How can I use tables I create in the Excel PowerPivot window in the same ways I use tables that are in ordinary Excel worksheets, to accomplish tasks such as printing? I am able to use the powerful capabilities of PowerPivot to produce tables with precisely
the information I need for reports -- connecting data from multiple tables/sources, filtering, etc. -- but then there doesn't seem to be any way to actually print what I'm seeing, nor can I seem to access cells in these PowerPivot tables from Excel worksheets.
If a PowerPivot table is conceptually an Excel table with additional power in terms of pulling in data and relating it, it would seem appropriate that all the power of Excel could be brought to bear on these PowerPivot tables, but on the contrary, the available
operations are limited. if, instead, a PowerPivot table is more correctly viewed as a data source that Excel worksheets can connect to, that would be fine, and indeed, one
can use a PowerPivot table as a data source -- except it can't be brought into an Excel worksheet as an ordinary Excel table, unlike most other data sources.
I hope I'm missing something really obvious, and that someone can point out what it is. Thanks.

Kirchh,
When PowerPivot was first designed, the decision was to integrate closely to Sharepoint to allow for team sharing. We are constantly evaluating customer feedback to add more features, and this has been one of the feedbacks we have received. We will consider
supporting this in the future but with no gurantee.
Chu
-- This posting is provided "AS IS" with no warranties, and confers no rights
I'm not questioning why PowerPivot is closely integrated with SharePoint. I'm asking why connecting to the PowerPivot model from within Excel was intentionally blocked by Microsoft, when all the functionality to do so appears to be present.
Is creating an OLE DB connection in Excel to PowerPivot as $Embedded$ supported?
No support. It was originally designed for SharePoint. This changed with Power Pivot for Excel 2013 (it's packaged with it). Originally the scope (in 2010 through 2012) was that it was for SharePoint users. So it became more obvious through that to market it
toward all Excel users. Thus the recent changes.
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Is there a small and lite portable, around 5 lbs or less, printer for my iPad to take on vacation for photos, more than 1 at a time, and words? I have both HP dj460 and ps 616A but they don't support iPad. Is there a device, work around or ePrinter air pr

Is there a small and lite (5 lbs or under) portable air printer / ePrinter I can use to print contact sheets of photos and words with my iPads? I already have the HP dj460 and HP ps 616A but they don't support the iPads.

Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
HP ePrint Home & Biz
http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
Mobile printing.
This blogger found one solution.
http://genuinely-original.blogspot.com/search/label/iPad%20Printing
Make Portable Printing Easier with Print n Share and the Brother RJ-4040
http://prmac.com/release-id-44494.htm
Use an airprinter with a power inverter
http://genuinely-original.blogspot.com/search/label/iPad%20Printing
see makethisstuffwork post in:
https://discussions.apple.com/thread/4987217?tstart=0
Brother PocketJet® 673
-- Prints on a variety of 8.5" wide thermal media.
-- Print PDF files from your iPhone and iPad with the PJ-673 Print app
http://www.brother-usa.com/Mobile/ModelDetail.aspx?ProductID=pj673-k&PG=26#.UeX0 Z18pDDJ
List of supported AirPrinters.
http://support.apple.com/kb/HT4356

Canon LBP6000 print driver - no printer appears in the 'add printer' section' I have installed Mac CAPT Ve r340 and nothing shows.r

I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop.
I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options. So very open to advice.
Thanks
T.

The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

I added extension: Print Friendly initial rev72.1 & Print/Print Preview 0.9 but they don't appear on the add on bar. How can I use these two?

Similar Messages

Maybe you are looking for