I am getting a memory leak that sometimes leads to an unresponsive Firefox, but does not crash per se.

Hello, For the last couple of months, I am having issues with one of my tabs or the program itself causing a memory leak. I was hoping that subsequent releases would fix the problem, but when I downloaded V.11 it did not help.
I use tab mix plus and at any time, usually have about 25 tabs open. Everything functioned okay for 8 or so months up until recently.
I am wondering if there is a way to try to track down what is causing the leak. If it is one of my open pages, i will get rid of it. I tried opening one page at a time from scratch, but could not find the issue. .
I always have flash block enabled to cut down on the website junk.
using OSX firefox v11.

Now, I'm not going to say it's an Add-On problem because from the research I've been doing on this problem for the last half hour shows that everyone has DIFFERENT add-ons, but everyone's having the SAME problem....
So I went through my add-ons and disabled them one by one, and the single add-on that has been giving me grief is the latest WOT add-on. So, I have Firefox 11 (so does my wife) and we both have the WOT add-on. But that's where the similarity ends... I have Windows 7 x64, she has Windows XP x86.... but she doesn't have the memory leak problem.
What I see is a sawtooth pattern over time. Memory goes up a little over 30+ seconds, then drops down. But over half an hour, the peaks of the sawtooth are larger, and it doesn't drop back down to the same level again - always a little more than before. And before you know it, FF is peaking at 1.5+GB, dropping down to 1.2GB... and FF is running very, very slowly.... excessive disk accesses (paging probably, though I apparently I still have 1.5 to 2.0 GB of free RAM). Killing FF frees it all up, and if I open FF again, it's back to using 250MB of RAM.
So, it's not the add-ons per se, but how they're interacting with FF (or the other way round).... most likely, it's this plug-in container they created to stop add-ons from taking FF with them when they crashed. Seems to have created more problems than it has solved..... would be great if you could choose not to use it....

Similar Messages

When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone' The music in that tab is always on my phone but does not show in my itunes library. How can I get it into my library?

When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'. This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library. How can I get it into my library? It doesn't sync either.

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

IMovie '11 How do I recover a project that appears within the IMovie Projects folder but does not show in the Project Library?

I have had my MBP for just over 3 months now! Yes, I made the switch and up until now I have been quite happy.
I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos. Now time to make some Travel movies.
I have been working on a particular IMovie project for a few weeks now. Size is 365MB. Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window. It does appear in the IMovie Projects folder but I cannot open it. I have copied the file to DVD just in case. All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
I have scoured the bulletin boards and tried many suggested fixes to no avail. Main suggestion was to remove the following files from Library/Preferences
com.apple.iMovieApp.plist
com.apple.iApps.plist
However, this did not sort out my problem. In the end I put back the original files.
Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention.
After all the file is there with the others. They are available.
I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
Thanks.......

Gweggie Boy wrote:
Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep. I will peruse this possibility when I get a moment.
You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
John

I have an ipod thats from the 3rd or 4th generation, but does not have a camera and any apps I try to download it says the software is not up to date, but I checked. How do I fix this and get the next update? My itouch is stuck with version 4.2.1.

Please help me figure out how to get my 3rd generation ipod to have the newest software in order to download apps. It will not let me.

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

My wife and I have new IPad Airs. I was able to download and use the NY Time Crossword app, but can't get it to download on hers. It shows as "purchased" but does not appear as an icon on her home page, but is on her purchased page. Any ideas?

Can't get NYTimes Crossword app to download onto my wife's IPad Air. It shows as "purchased" but when trying to download with the Cloud icon, it just circles for a while, then stops. The app works fine on my IPad. Any suggestions?
Thanks

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

TS1398 my iPod 2 gen says that I'm in range for wifi, but does not allow me to use it after all the times i have tried. it works on every other device, but mine. Need help please?

HELP

Have you:
- Tried another network?
- Does the iPod see the network?
- Tried a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powered off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Setting
- iOS: Troubleshooting Wi-Fi networks and connections
- Changing the encryption on the router?

Am getting message from MacPro that my start up disc is full - but I can't find it and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files. help?

I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss in the trash, but it is not clear to me what items I can toss and which items I can't toss. Can you help? Using the imovie "help" support the system showed me under the menu item "go" where the "start up disc" should be - but that wasn't actually available on my menu! Thanks for your help!

Disk Utility
Get Info on the icon on Desktop
Try to move this to the MacBook Pro forum
Your boot drive should be 30% free to really perform properly. 10% minimum
Backup, clone, use TimeMachine, use another drive for your projects and movies, replace and upgrade the internal drive even.

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

Everytime I'm playing a Face Book or other web sites after time has gone by I keep getting an error message that says something about an unresponsive Script or its busy. Getting very annoying

After playing for awhile a Face book game or any other web sites I begin getting an error message that says a busy or unresponsive Script. It has the option of "Continuing" or "stopping" the script When I click to Continue the same error keeps popping up all the time. Same as with clicking on the "Stop" the script option. Script # is https://s-static.ak.facebook.com/rSrc.php/vi/yx/r/LKHquoz1.v.js:5. Why am I getting this error? It's getting really annoying. I hope you can help.

can you check this issue on Firefox 10?
* getfirefox.com

I had to replace my iPhone today. I have alot of music that still resides on my iPad. It does not appear in iTunes. How to I get this music to my iPhone?

I had to replace my iPhone today. I have alot of music that still resides on my iPad. It does not appear in iTunes. How to I get this music to my iPhone?

From the iPad to itunes...
Transfer Purchases
File > Devices > Transfer Purchases
More Info Here > http://support.apple.com/kb/HT1848
From iTunes to iPhone...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
Thank you.

I found the answer just after posted this. Thanks to a user named CloudWalker. Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

I updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

i updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

Without a backup on iCloud, there needs to be another device using the same @icloud address that is syncing to the notes. Without that, there is no way to go back in time to create a backup before performing a major update.

I am getting a memory leak that sometimes leads to an unresponsive Firefox, but does not crash per se.

Similar Messages

Maybe you are looking for