I am getting error Error in calling up function 'BAPI_APOATP_CHECK' in APO server The current application triggered a termination
I am getting error Error in calling up function 'BAPI_APOATP_CHECK' in APO server The current application triggered a termination
when triggering for gatp.
Hi Virender,
This error can be experienced due to many reasons. based on my experience below reasons can cause this issue.
1) If you are using allocation check if allocation is correctly set.
2) In case you are using custom enhancements / user exits (in SD / GATP / CIF) check if any of them, causing this issue.
In my case correction of allocation setup could resolve this issue, so check what is the reason in your case.
Rgds
Sourabh
Similar Messages
-
Rule Based ATP- Error in calling up function 'BAPI_APOATP_CHECK' in APO ser
Hi Experts
I hae configured Rule Based ATP with Multi-Level ATP check. I have completed all configuration required for Rule Based ATP but still facing an error
" Error in calling up function 'BAPI_APOATP_CHECK' in APO server 'SC5CLNT001': Check instructions 30 / A does not exist for locat"
Have any of you ever encountered this error?
Regards,
Sushovan DattaDear Sushovan,
Most likely cause of the above error is a missing requirement class in R/3 and missing Check mode in APO for material and plant combination.
Please read the F1-Help for field check mode in APO:
"Together with the business event, the check mode derived from the product master defines the type and scope of the checks carried out. It also controls forecast consumption.
SD (R/3) uses the requirement class of the requirement as check mode. As of R/3 Plugin 2000.1, the requirement class is transferred (via the strategy group in the material master) to the location-specific APO product master (ATP tab page). In the process, no plausibility check is carried out. For this reason, you should not enter any other check mode in the product master. (The check mode in the product master must agree with the requirement class from the R/3 system.)"
So please create for your material in corresponding plant the requirement class ' 030' assigned to the strategy group in MRP3 in R/3 and the same in the check mode field in //mat1 in APO.
Afterwards the gatp check will find the check mode and business event (check instructions) and the error will be not appear again.
Regards,
Tibor -
Error in calling up function 'BAPI_APOATP_CHECK'
Dear Experts,
I'm encountering the error Error in calling up function 'BAPI_APOATP_CHECK' in APO server 'SXXCLNT100': Access via 'NULL'object reference not possible while performing the ATP check. However I'm getting this error for some materials. Has anyone of you encountered similar issue? Please suggest.
Thanks,
KrishnaHi,
The FM AVAILABILITY_CHECK calls BAPI_APOATP_CHECK as APO side and many reasons are there to show this error while doing ATP Check or saving sales order.It may sometime for temporary reason due to CIF queue where sales order might got struck.
As in your case it says ""Access via 'NULL'object reference not possible"" for few materials.Please check the material master and product master in ECC and APO system respectively along with CIF stuff.
Thanks,
Dipankar -
Application triggered a termination with a short dump(Assessment error)
Hi,
I created one accessment cycle with couple of segments. While executing this assessment cycle one of the segment is erroring out and it's throwing a runtime error. I searched in OSS and didn't find the right one. I really appreciate your thoughts and answers.
Short text |
The current application triggered a termination with a short dump.
Error analysis
Short text of error message:
Error ERROR_BW_REFBZ
Long text of error message:
Diagnosis
The following program error or handling error has occurred.
Error information:
ERROR_BW_REFBZ
System Response
| Processing is terminated.
Thanks
BrThanks for your quick response Baranyai and we set transfer prices indicator at controlling area level and it's related to profit center valuation. How is going to impact on Assessment cycle and it doesn't appear while creating and executing assessment cycle. I may be wrong and really appreciate your help.
Thanks
Br -
Errors occurred during call of function module BUPR_EMPLO_DELETE
when distributing employee data from (HCM) to (CRM) there is an error that appears in relation with the settings for the Business Parner:
"Errors occurred during call of function module BUPR_EMPLO_DELETE
Message no. R11335
Diagnosis
The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
Within a LUW, the indicator must be consistently set or not set.
System Response
The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors."
This prevents CRM to be updated with the changes. Kindly help me on the same.Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
So what is up with this error message in Muse?
MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
Cheers,
Vikas -
When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support -
To get the Current Application ID
Hello,
Is there any standard function to get the current application id ?
Thanks
GeethaIf the form is built using template.fmb, that should be automatically taken care of I will be surprised if that is not). If that is not the case and if you launching the form using either custom.pll or personalization, can you read the form function where it is called from (most probably in the parameters) and get its application from fnd_form_functions.
Thanks
Nagamohan -
Calling a function module from APO Macro
Hi,
Can I call a function module from a macro directly without going through the user exit? If so, how should I pass the parameters to the function module? I don't have to get the results back to macro.
RegardsHi Asokan - you can call a function module directly from a macro providing it is designed to be called from a macro. For example if you are in the Macrobuilder and use the menu path Edit -> Edit User Function then you will get a list of existing function modules that you can call directly by inserting a Operator/function into your macro. If you want to call a function module not listed in the User Function drop down list then you will either need the user exit or create a custom function module as a wrapper and register the wrapper function module in the Edit User Function menu path. Calling a function module will always return a value - but you can choose to ignore that value depending on how you build your macro.
Regards
Andy -
I have a third generation iipad and a 2nd generation iPad.Both wifi only.I cannot get these two machines to sync spreadsheets to each other using the numbers application and iCloud .What am I doing wrong?
no they are already in mp3 format I just tried that home sharing today because I couldnt find any other reason why they werent syncing. here is an example of a sync I just tried. I made an mp4 concert into an mp3 it came out perfect on my computer.. then I tried to sync it to my ipad with no luck, other than it going on my computer, it did not show up anywhere on my ipad in any area of the music sections etc playlists, songs, albums etc. Its just not there but remains on my computer. thats why I tried the home share today to see if that would help. Either I am really missing something or there is something wrong with this ipad. Did you ever have any trouble like this, does anyone? and what is something good to try? thank you again for answering! I appreciate it.
-
How do I handle errors from a call to an http handler routine on the server?
I have written an http handler for the server. It is used for file uploads. It works fine.
However, if the server gets any kind of exception, I don't seem to get anything back in the Silverlight httpWebRequest. It seems like something in the communications sees the exception as a "server not found" type error. And a
Dialog pops up that appears to NOT be my code that says the message.
For my WCF calls, I implemented a SilverlightFaultBehavior that switched the status code to OK and I was able to get the server exceptions from my WCF calls into my Silverlight app.
But how do I do that for an http handler? What do I have to add, if anything to the server side and what do I need to do on the Silverlight client side?How are you calling your service?
You should be doing asynchronous calls and supplying a callback with silverlight.
Check for errors in the callback.
FileListServiceReference.FileListServiceClient proxy = new ITSupport.FileListServiceReference.FileListServiceClient();
proxy.GetFileListCompleted += new EventHandler<ITSupport.FileListServiceReference.GetFileListCompletedEventArgs>(proxy_FileListCompleted);
proxy.GetFileListAsync(fileList);
void proxy_FileListCompleted(object sender, ITSupport.FileListServiceReference.GetFileListCompletedEventArgs e)
ObservableCollection<ImageVM> ims = new ObservableCollection<ImageVM>();
if (e.Error == null)
That does stuff if there's no errors and returns nothing if there are but you might want more sophisticated handling.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
Error 1097 after calling dll function which allocates memory inside
Hello!
When a call one my functions in my dll from LabView, i get an error 1097. My function takes a few arguments and then allocates some memory for measurement.
It's not returning any pointers to that memory area, it is just allocates that memory for itself. I don't know what could be the problem, probably i am missing something.
Could you help please?
Best regards,
Tamas
Solved!
Go to Solution.Are you sure that the allocate function is the problem?
Error 1097 simply means something inside the external code wrote into memory locations that it was not meant to write. That is usually because of output buffer parameters that are not allocated (large enough) in LabVIEW when passed to the external code fucntion, so the function assuming it received a buffer of a certain size happily writes into that buffer but overwriting other information it should not have.
But that is by far not the only possibility to cause this error. A simple bug in the external code can cause the same problem when a pointer goes astray or such. The fact that you used that library elsewhere already without seeing any problem is unfortunately no guarantee that the function is not buggy. The LabVIEW exeception handling around the Call Library Node has gotten rather picky and can detect violations that do not have to cause visible problems at all. But the violations it detects are real violations so just silencing them is not a good idea, as they could cause all kinds of problems including overwriting vital data structures in your program that either cause a crash later on or simply wrong results in other parts of your program. Especially the last one is a total bummer to debug.
Without seeing much more of your code it is basically impossible to point out where the problem could lie. The particular Allocate function doesn't look like there is much that could be done wrong, but I would assume that you call several other functions too somewhere, which could cause the problem. If you can absolutely positively say that you never ever call any library function with a to short (or unallocated) buffer parameter, then you will have to take it up with the manufacturer of your lib, as it would seem very likely that there is some problem in there.
Also you pass a handle to the library function but your Allocate function does not have this as a parameter! Where does this handle come from? Are you sure you have allocated and prepared it properly before calling this function? A handle is quite often a pointer, although usually a so called opaque pointer meaning the user of the library does not and should not know anything about the structure this pointer points to. It is only known internal to the library.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node
I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
RyanHello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments -
my macbook is loaded with microsoft word for macs and every time I try and open the program I get an error reading and it will not open. This is what it says:
The application Microsof Word quit eunexpectedly. Powerpoint and the other applications still respond!The joys of Microsoft!
Maybe the preferences file is corrupted. You should be able to find the Word preferences file in the folder:
your user name/Library/Preferences
Its name is com.microsoft.Word.plist
I suggest you drag this another folder and try Word again.
If that doesn't work then you might find clearing the cache files will fix the problem. You can do this manually but I never bother. Instead I use a program like Snow Leopard Cache Cleaner (shareware) or Onyx (free). These programs do lots of other maintenance jobs so it's worth having at least one of them.
Bob
Maybe you are looking for
-
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS? I get this when pushing an AP template to six new 3502i series access points. The error reads like this: *** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' **
-
Does anyone know of a place that has a macbook pro retina in stock (UK)
looking for a MBP-R 2.3 urgently before i head back home , does anyone know of a place with current stock (UK)
-
Which of the P6 web features do you use?
Primavera P6 is the most powerful, robust, and easy-to-use solution for prioritizing, planning, managing and executing projects, programs and portfolios. If you have upgrade to P6, please tell us which of the P6 web features you use, and how we can m
-
How do I put the songs from CDs on my iPad?
I put a bunch of songs from my CDs on the library part of iTunes. IMO logged in and everything, I just can't see it on my iPad. What do I need to do to get my songs on my iPad?
-
Why won't Firefox save my passwords?
Recently, I ran System Mechanic to clear out personal information. It wiped out all my saved passwords in Firefox. Now Firefox doesn't ask me whether to save passwords. I really miss this feature. I've tried to follow the Help" info and everything is