I am having trouble trying to format / clone image to a M4 SSD for my MAcBook Pro (model A1211)
I hope someone is out there today. I recently bought a Crucial M4 SSD (512 Gb) When I tried to clode my Lion HD using SuperDuper I got an error message half way through the process (destination no longer available; try again.) When I tried again, SuperDuper would not recognize the SSD. I then downloaded and tried to use Carbon Copy. It also took me about half way through and failed. After that failure I could no longer "see" the SSD (i.e. the icon disapeared.) I tried to reboot from the SSD using the Option key. The system sees the SSD, but will not boot from it, which is expected since it did not complete cloning. I thought that if I used Disk Doctor I could just start over. It won't let me do that either. When I try to erase the image it won't let me. When I look at properties for the SSD it shows on 1 Gb of capacity.
Does anyone know of a way to "reset" the M4 SSD to a null state so that I can try again, or should I just return it as defective?
It sounds like it would be best to erase it completely and start the cloning over again. You can completely erase the disk by going to your Utilities folder and then to your Disk Utilities Application.
Choose the partition (the field that is under the hard drive) of your SSD in the side bar and then go to the "Erase" option. MAKE SURE that it is your external SSD and not the hard drive you are trying to clone. Choose the Mac OS Extended (Journaled) option under format and then click erase. This will clear the disk and allow you to start over. I would recommend using Carbon Copy Cloner from the start and using it through. You might also want to consider that you got a bad hard drive. This is sometimes the case even with new hard drives.
Hope this Helps
Similar Messages
-
Having trouble installing adobe on my macbook pro, can anybody help ???
You may be able to load the OS from your other MBP disks, if they are the same modal MBP...
You could also do a clone of your other MBP to the blank one, use Carbon Copy Coner and a FireWire cable. -
Recently I am having trouble viewing some videos on Yahoo using Safari 5.1.1 on PowerbookPro 10.6.8. I am not finding a solution on internet.
An example link & a clear description of the trouble will help.
-
has anyone had trouble with the touch pad on the macbook pro not working properly. I have to click it 3 or 4 times befre it responds. Can these be replaced?
Your MacBook Pro has enough compute power to do airframe stress analysis modeling or weather forecasting. This is not a computational issue.
Most USB printers do the imaging on the Mac, then send the stream of bits to the printer. The speed of doing this depends on the Printer driver.
Some drivers will image the page in "slices", and then pause to image the next slice after the first one completes. This may also depend on whether you have enough RAM memory available to do the imaging for a whole page at a time.
You have not mentioned what Printer, or whether this is indeed the latest driver for it. -
This is for my wife's 15" MBP model 6.2.
Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph -
I need something that doesn't require a disk for setup.
Based upon your criteria an HP 100 Envy all in one would fit. The drivers are downloaded from Apple.
http://www.amazon.com/HP-All-Printer-CN517A-B1H/dp/B0043D2O7C
http://reviews.cnet.com/multifunction-devices/hp-envy-100-e/4505-3181_7-34182185 .html -
in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
stell80 wrote:
in settings and then general i do not have the option of software update...?
That is only present if you have already updated to iOS 5 or later. If you're on iOS 4 you can only update while connected to your computer's iTunes.
stell80 wrote:
How do I know if I am on IOS6
Settings/ General/ About
stell80 wrote:
I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
You can't access iCloud from your iPhone unless you're on iOS 5 or later. Otherwise, refer to this article:
http://support.apple.com/kb/HT4436 -
Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'
Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!
-
im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?
I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps -
Hi, I having trouble trying to connect to the wifi, I know the passwords and checked with others divises but with the mac os x 10.7.5 mac os x lion is not working
One of the wifi connections said "time out" or did not recongnise the passwordHi andrea122,
Thanks for visiting Apple Support Communities.
If you're not able to connect to Wi-Fi on your iMac, the troubleshooting steps in this article can help:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
Jeremy -
HT4759 i am having trouble trying to locate my lost Ipad
I am having trouble trying to locate my lost Ipad
What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in Toronto delta Chelsea hotel downtown an I am not able to track it. Please help! [email protected], has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
I am having trouble trying to boot from my lion osx install disk on a 2007 macbook. The disk ejects when I start up with the option key depressed. Anyone have any ideas?
Thank you.How did you get a Lion OSX install disc? They don't exist. Do you mean the gray disks that came with your 2007 MacBook?
If you mean the gray disks, try starting up with the "c" key held down.
What version of OSX is on your MacBook now? Have you tried booting from the Recovery partition? -
Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".
How can I correct this problem?What type of file is it? What is the extension (the 3 letters after the . (DOT)) of the file?
Could be it is a Windows Exe file and simply will not run on a Mac. Which is good because anyone that would send you a excute (.EXE) file is up to no good. just my opinion. -
Anyone having trouble trying to quickly jump to an artist in the albums view by pressing the first letter or the first few letters of that artist's name?
With this update it's like that feature doesn't work anymore or doesn't work like it used to.I came here to write just this. The bug was introduced in 11.2 and not fixed in 11.2.1. When I start typing the artist's name in the albums view, it selects the first album by that artist correctly but scrolls to the wrong part of the library making the feature useless. To get around the bug, I press command+enter to start playing the selected album and then command+L to go to the now playing song.
Is there any way to downgrade in the meantime?
EDIT: More people having the problem here https://discussions.apple.com/message/25810622 -
Having trouble trying to reach levels in mailboxes
having trouble trying to find levels in my mailboxes
Hi peterfrombellmere,
By asking about levels in mailboxes, it sounds like you are speaking about nested mailbox folders.
If so, see if this is the issue.
iOS: If IMAP Mail folders are not visible - Apple Support
If you sync IMAP mail account settings from your computer to iPhone, iPad, or iPod touch, and the IMAP folders on your computer are all shown under your Inbox folder, then it might not work as expected on the device.
If this is the case, you may need to specify what is called an IMAP path prefix. You can enter the IMAP path prefix by choosing Settings > Mail, Contacts, Calendars > [ Tap your account] > [Tap your account again] > Advanced > IMAP Path Prefix. Here's an example of an IMAP mail account that requires a path prefix:
ISPs that require IMAP path prefixes usually provide instructions for configuring them, so check with your ISP or network administrator for additional information.
Thank you for visiting Apple Support Communities.
Nubz
Maybe you are looking for
-
Hi, I am trying to make a portfolio website but I ame xperiencing many glitches across different browsers. I specifically am trying to have a full width page for my site but even though I make sure that my elements click on each end of the canvas, it
-
IOS6 won't install on my iPad...anyone else experiencing this?
I am on WIFI and plugged in to a power source...the update simply errors out after approximately 10 minutes and will not continue. Any suggestions? Thank you!
-
Can any one help me I need to start another report server to serve new Custom Application in Oracle E business suite server My Application R12 1.2 Os Linux 5
-
I am trying to sign up for Veterans MediCal benefits on my iPad. When I go to the content page, I get a message that states that I need a newer version of Adobe Acorbat. I have updated it twice and still cannot see the VA Form 10-10ez. Is there a tri
-
Why do I need this old nag? Where is your conscience?