I am not able to find the Subsription/manage part. It is not available for me in the "view apple id" screen
i am not able to find the Subscription / manage part. It is not available for me in the "view apple id" screen
ok . i am I try to managed cycleops app for tablet
https://www.cycleops.com/virtualtraining/apps-pricing
Similar Messages
-
Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.
-
My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.
No, there isn't. If possible return it to whomever you purchased it from and get your money back. Otherwise, you have a very expensive paperweight that is of no use to you.
-
How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.
Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
LN -
Not able to find the created BI System
Hi,
I have configured the BI System as in the document.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
I am having few doubts.
1. Whether we need to choose only SAP system with load balancing template.
2. Whether we can set
BI Directory Provider: No
BI Master System: No
And also one more thing, I am using UIDPWD logon method. Whether there will any problem with this
I need clarifications on these.
Also after doing all these things i am not able to find the created BI System in VC.
When i test the same in Portal, it is saying the connection is successful..
Anyother step needs to be done, after this in configuration. Please let me know.
Please help me to resolve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 12, 2008 1:41 PMHi Inna,
Thanks for the reply.
But in Portal I have done the User Mapping between Portal Server and BI System.
I am using BI 3.5 System, Whether there will be any problem?
The BI Kit is already installed and i am able to view the components.
Still i am not able to get the System that i have created in portal into VC 7.1.
I am only getting Web Services created in that system and Service Registry and Visual Composer Models in Search Tab.
Whether we need to create a RFC destination also for this BI system?
Please help me to solve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 15, 2008 4:44 PM
Edited by: Palani Appan on Sep 16, 2008 9:42 AM -
FindClass() not able to find the class in the same path
Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM -
Not able to find the required upgrade patch for 10.2.0.2
Hi all,
I am trying to upgrade my database from 10.2.0.1 to 11.2.0.2, for which first i need to upgrade it to 10.2.0.2. But am not able to find the same in the support.oracle.com , please advice.
Platform details :
[ora10g@www ~]$ uname -a
Linux www.benefits.com 2.6.18-164.el5 #1 SMP Thu Sep 3 02:16:47 EDT 2009 i686 i686 i386 GNU/Linux
Database details :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Thanks and Regards,
LittlefootThe 10.2.0.2 patch is 4547817 - see this MOS Doc
Quick Reference to Patchset Patch Numbers [ID 753736.1]
HTH
Srini -
Hi, i'am not able to find the redemption code that is required to renew subscription for my creative cloud account. Please advice.
Redemption Code Help
Mylenium -
Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help
Please search the forums. This has been covered here extensively.
-
User is not able to find the receipt to correct it from Iprocurement.
User is not able to find the receipt for PO to correct it. User logged into iProcurement and queried for this PO but system says no data exists.
I checked there is a receipt for this PO and the same can be queried in Correction window through core APPS.
Could you please help why its not available in iProcurement for correction.
Thanks in Advance,
AVNAre you logging into right organization (OU) to check the receipts?
Check your ship to location in PO and then based on that change your organization (through responsibility or change organization) then query yur receits, it should come.
BTW for receipts to be seen, the PO lines should not be in "CLOSED" status!
Jithendra -
Not able to find the HR Integrator Function in the Function
Dear All,
I am not able to find out the HR Integrator function in the Functions. Kindly do i need to do any setups or any other things to get this in place.
We are using Version R 12.0.6
Thanks and Regards,
Joshna.Hi Duncan,
Sorry for the late response.
Please find the issue below.
- we wanted to create an HR Integrator for the Requisition and vacancy. For this we find the steps in the metalink. Please find the steps below.
When we are doing 5 th step we are not able to find the "HR Integrator" in the list of values. So we went and check the Menu there we find that HR Integrator function is not attached to the Menu. We tried to call that function but we are not finding that Function.
1.Check your IE and Excel/Word Settings.
2.Select the ‘Desktop Integration’ Responsibility
3.Click ‘Create Document’ function
4.Uncheck the Reporting Checkbox as this integrator is for uploading. Select the Viewer as Excel
5.Select the ‘HR Integrator Setup’ as the Integrator.Click "Next"
6.Select Content as "None" as we need to create the blank document for upload and Click "Next"
7.Click on "Create Document "
8.Once the spreadsheet is created, enter the following details and upload it back into the system.
Metadata Type : DOWNLOAD – to create download integrators
UPDATE – to create download / upload integrators
Application Short Name : PER
Integrator User Name : <User Defined Name for Integrator>
View Name : <User Defined View>
Form Name : Name of the Form to which the integrator is to be associated
API Package Name : API Package Name used to Upload Data (Only for UPDATE Integrators)
API Procedure Name : API Package Procedure (Only for UPDATE Integrators)
API Type : PROCEDURE / FUNCTION
Click on Oracle -> Upload to create the integrator
9.Define a Function using System Administrator -> Application -> Function. This function will be used to restrict the Responsibilities for which a particular integrator is available.
Function = Internal Function Name
User Function Name = User Defined Function Name
10.Create the Form Function Association Document using Web ADI Menu –Desktop Integration -> Create Document
Select Integrator as "HR Maintain Integrator Form Function Associations" and repeat step 4
11.Select the application in which the integrator is defined and the Integrator User Name for the Form Function Association has to be done. Click Next to continue.
12.Click on "Create Document" and Attach the Form Function created in step 9 i.e.Internal Function Name to the Integrator in the document created in the above step and upload the same.
13.Define the Layout for the Integrator created in above steps using
Desktop Integration -> Define Layout
14.Select the integrator for which the Layout has to be defined and click Go to continue.
15.Select the columns that will be displayed and click Apply
16. Navigate to the Form which you have attached in step 8 and Click on Export Icon.
You will be able to view the Integrator. -
In the Packet not able to find the native method
I have native method callSucJava , This method when called from the java file independently (without it being part of the package ) works fine.
But when i copy the same class with the native method defined into the package and include the java file with the native method in the package , it gives the following error
java.lang.UnsatisfiedLinkError: callSucJava
Which means it is not able to locate the neative methos in the library . It is ofcourse able to find the library. But as this method is present in the library , and syntactically it is correct as it works fine when being run independently.
Any help would be appreciated.
thanksIn your old library there shoud be the function
JNIEXPORT void JNICALL
Java_callSucJava(JNIEnv *, jobject) {
You have to change it to:
JNIEXPORT void JNICALL
Java_your_package_callSucJava(JNIEnv *, jobject) { -
Not able to find the New ods created in Query Designer.
Hi,
I am trying to create a new query on an ODS(new) in Query Designer but not able to find the ODS . The ODS is present in the system however when we check . Please advice whats going wrong.Hello Prakash,
I know the solution
Go to RRMX -> Queries -> Select New Query -> and then click on InfoArea -> Select ur new ODS -> and Click OK
U will be able to see characteristics and keyfigures..
Drag and drop and click on execute....
Reward if its helpful.....
Thanks,
Sonu -
Not able to find the infosource and transfer rules in the infosource tab
Hi everyone,
Not able to find the infosource and transfer rules in the infosource tab in Modelling. I was able to see that the infosource is available under nodesnot connected in the transport connection tab. But i cannot see the same in infosource tab. Please advise.I have searched with technical name, I am not able to find it, but when i double click on the datasource .....the transfer rules pop up. Because I have not transported the application component, I am not able to find it. But even though it should be available on the nodesnotconnected, I still cannot see it. Is there a work around this ?
I have also tried rsa1old, it still could not find.
Thanks for your quick response
Maybe you are looking for
-
How to monitor a java service in windows environment
Hi all, I have a 5 java services running on a windows box. I want to monitor one of those. This service is called "appnew " and appnew interacts with the oracle database. If it is running normally the application name as seen in the task manager is "
-
Can no longer send long text messages to an android device
In the last month, whenever I send a relatively long text message to a non iPhone user (Galaxy s5), that person will not receive the message at all. On my screen it says that the message was sent, but they are not receiving it. I used to never have t
-
The best green screen work flow for FCPX
I over 300 clips done in green screen. Some clips are 10 seconds some are 5 min. I need to prep them for import into Motion 5 where they will be keyed and background graphics will be added. The way im doing it now is dragging the chosen shots into on
-
Hi, Recently, the ngage tab in the menu when i click it nothing happens and i tried to enter thru the multimedia button but it said system error. What's happening? Regards. Solved! Go to Solution.
-
CS6 Premium: counterfeit? [was:problems with software]
I bought an adobe creative suite 6 premium and tried to download it but they said it might be counterfeit. how can I find out??