I am unable to apply patches via MOPatch
first I Upgraded the database from 10.2.0.2 to 10.2.0.5 with runinstaller
after that I would like to apply the SAP Bundle Patch.
These are the steps which I executed:
1. Update OPatch and MOPatch
2. create patchfolder patches
3. put the Bundle Patch in patches
4. /bin/sh $ORACLE_HOME/MOPatch/mopatch.sh -v -s SAP_112027_201208_LINX8664.zip
Now I get the following message :
Cannot determine OPatch version and feature support.
Version:
OPatch : 10.2.0.5.1
MOPatch : 2.1.14
What could be the reason?
lmtaix016:oratlh 101> opatch lsinventory
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 10.2.0.5.1
Oracle Interim Patch Installer version 10.2.0.5.1
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/TLH/102_64
Central Inventory : /oracle/TLH/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.5.1
OUI version : 10.2.0.5.0
OUI location : /oracle/TLH/102_64/oui
Log file location : /oracle/TLH/102_64/cfgtoollogs/opatch/opatch2014-06-05_17-32-52PM.log
Patch history file: /oracle/TLH/102_64/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/TLH/102_64/cfgtoollogs/opatch/lsinv/lsinventory2014-06-05_17-32-52PM.txt
Installed Top-level Products (3):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1 10.2.0.2.0
Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
There are 3 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
Exception in thread "main"
OPatch failed with error code 1
Similar Messages
-
Patch 19591087 unable to apply weblogic 12.1.3
I am unable to apply patch 19591087 in weblogic 12.1.3
getting below error logs
Environment:
OPatch.ORACLE_HOME=/apps/wlserver/12.1.3
oracle.installer.invPtrLoc=/apps/wlserver/12.1.3/oraInst.loc
oracle.installer.oui_loc=/apps/wlserver/12.1.3/oui
oracle.installer.library_loc=/apps/wlserver/12.1.3/oui/lib/linux64
oracle.installer.startup_location=/apps/wlserver/12.1.3/oui
OPatch.PLATFORM_ID=
os.name=Linux
OPatch.NO_FUSER=
OPatch.SKIP_VERIFY=null
OPatch.SKIP_VERIFY_SPACE=null
oracle.installer.clusterEnabled=false
TRACING.ENABLED=null
TRACING.LEVEL=null
OPatch.DEBUG=false
OPATCH_VERSION=13.2.0.0.0
Bundled OPatch Property File=properties
Minimum OUI version: 10.2
OPatch.PATH=/opt/boksm/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/opt/novell/zenworks/bin
OPatch.MW_HOME=/apps/wlserver/12.1.3
OPatch.WL_HOME=
OPatch.COMMON_COMPONENTS_HOME=
Oracle Home : /apps/wlserver/12.1.3
Central Inventory : /opt/home/mwswls/oraInventory
from : /apps/wlserver/12.1.3/oraInst.loc
OPatch version : 13.2.0.0.0
OUI version : 13.2.0.0.0
Log file location : /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
OPatch detects the Middleware Home as "/apps/wlserver/12.1.3"
Dec 19, 2014 4:35:23 AM oracle.sysman.oii.oiii.OiiiInstallAreaControl initAreaControl
INFO: Install area Control created with access level 0
Bugs fixed by this patch 19591087:
18820382: Fix for Bug 18820382
Applying interim patch '19591087' to OH '/apps/wlserver/12.1.3'
Verifying environment and performing prerequisite checks...
Running prerequisite check "CheckMinimumOPatchVersion" ...
All patches can be applied using this OPatch.
Prerequisite check "CheckMinimumOPatchVersion" passed.
Running prerequisite check "CheckPatchingModel" ...
Prerequisite check "CheckPatchingModel" passed.
Running prerequisite check "CheckForIdenticalPatchInOracleHome" ...
Prerequisite check "CheckForIdenticalPatchInOracleHome" passed.
Patch "19591087" is ignored as it is not a "Fusion Applications patch".
Prerequisite check "CheckFileVersionFormat" passed.
Check if patch "19591087" is a no-op patch.
We have required comps greater than zero, so returning false for no-op patch "19591087"
None of the selected patches are no-op. patches..
There are some (or) all patches that are not no-ops.
Running prerequisite check "CheckFusionAppsCompatible" ...
OPatch is compatible with OUI for Fusion Apps patching.
Running prerequisite check "CheckForInputValues" ...
Input values is present for the all the actions of the given patches.
Running prerequisite check "CheckSystemSpace" ...
Finding the total space needed...
Total space needed for the patches are: 4663474
Checking if enough space is present on the disk...
Required amount of space is availale on the disk.
Enough system space is available.
Running prerequisite check "CheckSystemCommandAvailable" ...
All the required commands are available.
All the required system commands are present.
Running prerequisite check "CheckPatchApplicableOnCurrentPlatform" ...
Genereic Platform ID 0is specified for patch : 19591087
All the given patches are applicable on the current platform.
Running prerequisite check "CheckApplicable" ...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 19591087: Required component(s) missing : [ oracle.jrf.adfrt, 12.1.3.0.0 ] , [ oracle.jrf.adfrt, 12.1.3.0.0 ]
Log file location: /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
Package/s not installed. Please verify the patch logs.Hi Mike,
Could you please guide which one exactly from the below link. I have installed generic Oracle WebLogic Server and Oracle Coherence 12.1.3
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Thanks -
Hi,
I am new to weblogic.
Now i need to apply patch to weblogic.
Could you please share some doc or steps to apply patch via command prompt to weblogic server running on Linux platform.
Thanks in advance.If you have access to My Oracle Support (MOS), you can find detailed instructions with examples in KM note ID: 876004.1
Here are the same steps for your reference:
1. Download the patch from My Oracle Support (MOS). For more details, please refer to Master Note: How to Locate and Download Patches for WebLogic Server Using My Oracle Support Note 1302053.1.
2. Extract the contents from the zip file: you will have a jar file and patch-catalog_xxx.xml. A readme file may also be included.
3. Copy the files (for example, E5W8.jar) and the patch-catalog_xxx.xml from the zip file to the target machine. You do not need the readme file. Copy the files to the appropriate cache_dir directory for the target system: for example, $MIDDLEWARE_HOME/utils/bsu/cache_dir.
4. Run the $MIDDLEWARE_HOME/utils/bsu/bsu.sh script as shown in the below example to apply the patch
SYNTAX:
./bsu.sh -prod_dir=$WEBLOGIC_HOME -patchlist=<patchID> -verbose -install
FOR EXAMPLE:
./bsu.sh -prod_dir=/opt/oracle/wlserver_10.3 -patchlist=E5W8 -verbose -install
NOTE: Before running the above commands, the servers should be stopped. After applying the patch, they can be restarted.
Arun -
Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT
Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
Error while applying patch to 12.1.3 from 12.1.1
Hi,
while I'm applying patch 9239090, I'm getting the following error:
The following Oracle Forms objects did not generate successfully:
au resource IEXFBALI.pll
au resource OKSACTEV.pll
au resource OKSAUDET.pll
au resource CSCUTILS.pll
au resource OKCEXEVT.pll
au resource OKCEXPOR.pll
au resource OKCKSRCH.pll
The following Oracle Forms objects did not generate successfuly:
iex forms/US IEXCUOVW.fmx
iex forms/US IEXRCALL.fmx
wms forms/US WMSLABEL.fmx
wsh forms/US WSHQSSUI.fmx
wsh forms/US WSHSTREF.fmx
wsh forms/US WSHFSTRX.fmx
and i have allready applied patch 9239089 before 9239090IEXCUOVW.fmx
Error Statement:
FRM-30064: Unable to parse statement select site_uses.location location,
party_site.party_site_number,
substr(loc.address1,1,25) ||' '
|| substr(loc.address2,1,25) ||' '
|| substr(loc.address3,1,25) ||' '
|| substr(loc.address4,1,25) ||' '
|| loc.city|| ',' || ' '
|| nvl(loc.state, loc.province) ||' '
|| t.territory_short_name address,
site_uses.primary_flag,
loc.address1 address1,
loc.address2,
loc.city ||','|| ' '|| nvl(loc.state, loc.province)
||' '||loc.postal_code|| ' '
|| t.territory_short_name address3,
site_uses.site_use_id customer_site_use_id,
site_uses.cust_acct_site_id address_id,
site_uses.bill_to_site_use_id bill_to_site_use_id,
site_uses.primary_salesrep_id primary_salesrep_id,
loc_assign.loc_id location_id,
loc.state state,
loc.country country,
loc.postal_code postal_code,
site_uses.territory_id territory_id,
lp.meaning business_purpose,
lp2.meaning primary_flag_meaning,
ca.cust_account_id cust_account_id,
ca.account_number account_number,
decode(substrb(person.person_last_name,1,50), null,
substrb(person.person_first_name,1,40),
substrb(person.person_last_name,1,50) ||', ' ||
substrb(person.person_first_name,1,40))
contact_name,
owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
hz_party_sites party_site,
hz_cust_accounts ca,
hz_loc_assignments loc_assign,
hz_locations loc,
hz_cust_site_uses site_uses,
fnd_territories_vl t,
ar_lookups lp ,
ar_lookups lp2,
hz_cust_account_roles role,
hz_parties person,
hz_relationships rel,
hz_parties owner_party
where ca.party_id IN
(SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
UNION
SELECT ar.related_party_id
FROM ar_paying_relationships_v ar
WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
AND TRUNC(sysdate) BETWEEN
TRUNC(NVL(ar.effective_start_date,sysdate)) AND
TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and site_uses.contact_id = role.cust_account_role_id(+)
and role.party_id = rel.party_id(+)
and rel.subject_table_name(+) = 'HZ_PARTIES'
and rel.object_table_name(+) = 'HZ_PARTIES'
and rel.directional_flag(+) = 'F'
and role.role_type(+) = 'CONTACT'
and rel.subject_id = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXCUOVW
FRM-30085: Unable to adjust form for output.
WMSLABEL.fmx
Error Statements:
FRM-30064: Unable to parse statement select upet.type_name EPC_type_name, upec.name category_name, upet.type_id, upec.category_id
from mgd_idencoding_category upec,
mgd_idencoding_type upet
where upec.category_id = upet.category_id
and ((NVl(upet.partition_value,0)= 0 and upet.category_id = 1 ) or upet.category_id <> 1)
order by upec.category_id,type_name.
ORA-00942: table or view does not exist
Record Group EPC_RULE_RG
Form: WMSLABEL
FRM-30085: Unable to adjust form for output.
Generated 0 files successfully.
Generated 0 files with non-fatal warnings.
Generated 1 files with fatal errors.
adfrmgen is exiting with status 1
End of adfrmgen session
Date/time is Mon Feb 20 2012 04:44:01
WSHFSTRX.fmx
Error Statements :
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
IEXRCALL.fmx
Error Statements:
FRM-30064: Unable to parse statement select site_uses.location location,
party_site.party_site_number,
substr(loc.address1,1,25) ||' '
|| substr(loc.address2,1,25) ||' '
|| substr(loc.address3,1,25) ||' '
|| substr(loc.address4,1,25) ||' '
|| loc.city|| ',' || ' '
|| nvl(loc.state, loc.province) ||' '
|| t.territory_short_name address,
site_uses.primary_flag,
loc.address1 address1,
loc.address2,
loc.city ||','|| ' '|| nvl(loc.state, loc.province)
||' '||loc.postal_code|| ' '
|| t.territory_short_name address3,
site_uses.site_use_id customer_site_use_id,
site_uses.cust_acct_site_id address_id,
site_uses.bill_to_site_use_id bill_to_site_use_id,
site_uses.primary_salesrep_id primary_salesrep_id,
loc_assign.loc_id location_id,
loc.state state,
loc.country country,
loc.postal_code postal_code,
site_uses.territory_id territory_id,
lp.meaning business_purpose,
lp2.meaning primary_flag_meaning,
ca.cust_account_id cust_account_id,
ca.account_number account_number,
decode(substrb(person.person_last_name,1,50), null,
substrb(person.person_first_name,1,40),
substrb(person.person_last_name,1,50) ||', ' ||
substrb(person.person_first_name,1,40))
contact_name,
owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
hz_party_sites party_site,
hz_cust_accounts ca,
hz_loc_assignments loc_assign,
hz_locations loc,
hz_cust_site_uses site_uses,
fnd_territories_vl t,
ar_lookups lp ,
ar_lookups lp2,
hz_cust_account_roles role,
hz_parties person,
hz_relationships rel,
hz_parties owner_party
where ca.party_id IN
(SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
UNION
SELECT ar.related_party_id
FROM ar_paying_relationships_v ar
WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
AND TRUNC(sysdate) BETWEEN
TRUNC(NVL(ar.effective_start_date,sysdate)) AND
TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and site_uses.contact_id = role.cust_account_role_id(+)
and role.party_id = rel.party_id(+)
and rel.subject_table_name(+) = 'HZ_PARTIES'
and rel.object_table_name(+) = 'HZ_PARTIES'
and rel.directional_flag(+) = 'F'
and role.role_type(+) = 'CONTACT'
and rel.subject_id = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXRCALL
FRM-30085: Unable to adjust form for output.
WSHSTREF.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
WSHQSSUI.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignoredthese are the error statements -
Error While Applying patch ST-PI 2008_1_700 to solution Manager
Dear Techies,
Thanks alot for your fast response.
We are trying to upgrade Solution Manager Stack from
ST-PI 2005_1_700 to ST-PI 2008_1_700 ,
While applying patch it was suddenly stopped with an error
"Manual modification adjustment is neccessary"
While I tried to adjust it.
In Note correction tree. This the message with " green tick"
"0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
and is not allowing me to proceed further.
How to go about.
Thanks in advance.
regards,
KiranHi Varun,
Thanks for your reply.
As suggested by you, I executed "RTCCTOOL" programme.
It Has given that 4 notes were in red status.
They are.
1. [Note 69455 ] Addon upgrade ST-A/PI 01N_700SOL
Description "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10 (Addon delta upgrade package)
Implementation From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI
01N_700SOL. Upload to tx SAINT (just as you would do for an installation) and install as per note 69455
Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
4. [Note 539977 ] ST-PI Support Packages
Description Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for services]
Implementation Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via Maintenance optimizer. Upload from frontend int transaction SPAM, define a queue and import the queue.
6. [Note 539977 ] Note 1312413 for ST-PI
Description Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI
2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate
distribution.
Implementation We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if
not possible implement note 1312413 with not version >=12 using SNOTE. Regarding automatic maint.
certificate distribution see http://service.sap.com/maintenancecertificate.
9. [Note 1293326 ] EWA serviceprep correct. in sequence.
Description Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
Implementation Implement the coding correction of this note 1293326 with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
These are in green status
Successfully implemented addons/ transports/ notes
2. [Note 69455 ] Proc. after addon impl.
3. [Note 539977 ] Addon ST-PI 2008_1_700
5. [Note 539977 ] Note 1300023 for ST-PI
7. [Note 539977 ] Note 1293657 for ST-PI
8. [Note 12103 ] Collectors and TCOLL.
While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
"Note 0000069455 cannot be implemented since no valid correction is available."
And is same for other notes also.
How to go ahead.
Thanks in advance.
Regards,
Kiran -
My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Am trying to upgrade a 11.5.10 instance to R12 and while trying to apply patch 6435000, am getting stuck at the stage where worker is executing job jtf_diag_dependencies.xdf. Worker log indicates the system is unable to get a connection to db. The service name being used is actually the sid, but don't understand where the system is picking this up from.
Have verifed the context file and env files to ensure that the service name and sid are specified appropriately (hrtc and hrtc1 respectively).
Any pointers on where to look next greatly appreciated.
Thanks in advance,
VijayHi,
The error is, as you see, the inability to get a connection. The problem is that I don't understand why the service name is listed with the sid instead of the service name in the connection string. The listing a few lines above the error does indicate the service name (hrtc) and instance name (hrtc1) correctly. Where is this information being picked up from? I have reviewed the context file and environment files. The sid and service name are correctly listed in these files.
Any pointers?
Thanks,
Vijay -
hi,
we'r try to apply patch set 2 on apps server Oracle version 10g release 1, java version is 1.4.2.nad perl version is 5.8.2 and following is the error we'r getting
Internet Directory Server ldap:. Base Exception : javax.naming unable to
connect OIDIs there any message in alert log? Did you try to restart workers?There is no (error/warning/abnormal) message reported in alert log. Yes, it "Restarted" but again "Failed"
Can you check who access this view?(v$access)SQL> select * from v$access where object = 'FND_CONCURRENT_QUEUES';
no rows selected
Its not same error but please see:
Adpatch Fails While Executing afcmgr.odf. Error : The table is missing the index FND_CONCURRENT_QUEUES_N2 >ORA-00054: resource busy and acquire with NOWAIT specified [ID 295992.1]Reviewing the suggested note. -
Error in applying patch 6241631
Platform: "MS Win 32-bit 2003 R2"
EBS: "11.5.10.2"
DB Version: "10.2.0.4"
Java Version: "1.5.0_22"
While applying patch 6241631 got the below error:
ATTENTION: All workers either have failed or are waiting:
FAILED: file afcmgr.odf on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Error messages in adwork001.log:
===== Table FND_CONC_REQ_OUTPUTS all columns match.
===== Index FND_CONC_REQ_OUTPUTS_N1 all columns match.
CREATE OR REPLACE SYNONYM APPS.FND_CONCURRENT_QUEUES FOR
APPLSYS.FND_CONCURRENT_QUEUES
Start time for statement below is: Wed Aug 17 2011 13:07:43
CREATE OR REPLACE SYNONYM APPS.FND_CONCURRENT_QUEUES FOR
APPLSYS.FND_CONCURRENT_QUEUES
AD Worker error:
The following ORACLE error:
ORA-00955: name is already used by an existing object
occurred while executing the SQL statement:
CREATE OR REPLACE SYNONYM APPS.FND_CONCURRENT_QUEUES FOR
APPLSYS.FND_CONCURRENT_QUEUES
AD Worker error:
Unable to compare or correct tables or indexes or keys
because of the error above
Time when worker failed: Wed Aug 17 2011 13:07:43
Please suggest.Is there any message in alert log? Did you try to restart workers?There is no (error/warning/abnormal) message reported in alert log. Yes, it "Restarted" but again "Failed"
Can you check who access this view?(v$access)SQL> select * from v$access where object = 'FND_CONCURRENT_QUEUES';
no rows selected
Its not same error but please see:
Adpatch Fails While Executing afcmgr.odf. Error : The table is missing the index FND_CONCURRENT_QUEUES_N2 >ORA-00054: resource busy and acquire with NOWAIT specified [ID 295992.1]Reviewing the suggested note. -
Error when applying patch 3171663(11.5.9 CU2 )..
hi..
error when applying patch 3171663(11.5.9 CU2 )
below error in log file:
Assigned: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:03
FAILED: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:04
ATTENTION: All workers either have failed or are waiting:
FAILED: file mscplan.odf on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
below error in workerlog.. in adworker1
===============================================================================
The table is missing the index MSC_TRADING_PARTNERS_U2
or index MSC_TRADING_PARTNERS_U2 exists on another table.
Create it with the statement:
Start time for statement below is: Sat May 22 2010 21:58:04
CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
(SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
(INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
COMPUTE STATISTICS TABLESPACE MSCX
Statement executed.
AD Worker error:
The index cannot be created as the table has duplicate keys.
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
AD Worker error:
Unable to compare or correct tables or indexes or keys
because of the error above
Time when worker failed: Sat May 22 2010 21:58:04
====================================================================
My application version :11.5.9
my database version 8.1.7.4
Regards
Jaffer Ali>
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
>
Pl post the output of the above statement
HTH
Srini -
Hi
I found these instructions for downloading patches via ftp...
http://docs.sun.com/app/docs/doc/817-3331/6miuccqni?a=view
(Under section entitled "ExampleDownloading and Applying a Signed Patch by Using ftp")
I tried to follow these, but cannot see a signed_patches directory?
Is this old method only relevant to Solaris 8 - and if so - what is the Solaris 10 equivalent method of downlaoding patches via ftp?
Regards,
GXWI don't think we're alone, but no one seems to have an answer. This thread seems to be a user having the same problem:
http://discussions.apple.com/thread.jspa?threadID=1855814
I'll keep working at a solution and will post if I can find one. -
Need help in applying patch BP013 to OIM 9.0.1.2
Hi,
I am in th middle of applying patch BP013 to our OIM 9.0.1.2 environment. I am seeing an unusual behaviour. When I run the patch script patch_websphere.sh script, the xellerate application(Xellerate.ear) deployed in websphere is removed.
when i log in to websphere admin console, under applications-->enterprise applications-->i am able to see only nexaweb. I cannot see Xellerate.
I have not seen this behaviour earlier when I did patch upgrade BP011.
If anybody is experiencing same issue then please suggest.
Thanks,
Kalpana.There is no error in patch_websphere.log file. I search the whole log file. But there is one error under /data/OIM/xellerate/logs/wsadmin-app-install-websphere.profile.log :
======
Unable to install /data/OIM/xellerate/XellerateFull.ear
com.ibm.ws.scripting.ScriptingException: com.ibm.websphere.management.application.client.AppDeploymentException: AppDeploymentException: [Unexpected exception.]
org.eclipse.jst.j2ee.commonarchivecore.internal.exception.ResourceLoadException: IWAE0007E Could not load resource "META-INF/ibm-ejb-jar-bnd.xmi" in archive "xlBackOfficeBeans.jar"
org.eclipse.jst.j2ee.commonarchivecore.internal.exception.ResourceLoadException: org.eclipse.jst.j2ee.commonarchivecore.internal.exception.ResourceLoadException: IWAE0007E Could not load resource "META-INF/ibm-ejb-jar-bnd.xmi" in archive "xlBackOfficeBeans.jar"
======
I think it is because of this xeelerate application is not visible in websphere admin console. Please suggest.
Thanks for your quick response. -
Need Urgent Help: Solaris fails to come up after applying patch 120012-14
Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AMSolve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.
-
Unable to power off via init 5 on Solaris 10 5/09
I installed Solaris 10 5/09 at my home PC. The mother board is Asus P5QL-EM. I have checked that all major hardware/chipsets are on HCL.
Now I have problem power off the machine via 'init 5'. 'Init 5' will stop all services, sync file system then leaves the machine in a state of black screen, no keyboard response. But the machine is still powered on, fans are running.
If I bring the system to single user mode by 'init s', then 'init5' from single user mode, sometimes I can power it off completely but not every time.
I guess the problem is between the bios acpi interface and the kernel drivers, but just do know from where to start the investigation. Any idea?Sun's ACPI support is really sucks.
After I applied the latest kernel patch 141415-09, the trick I found stopped working. Any attempt to power off the system will just end up with a black screen. The last message I saw before the screen went black was
sync file system ... done
I then tested the Solaris 10 on another of my pc, that is about 3 years old. After the installation without apply any patch or tricks, system can be powered off properly. However, once I applied patch 141415-09, "init 5" stopped working.
All the pc I tested Solaris 10 here are able to be powered off properly by number of linux distro or even as simple as grub. So I created a work around it.
I created a small jfs partition and installed just GNU grub(no the grub from Sun) on it, then install Solaris 10 on the second fdisk partition. I created menu.lst
default saved
timeout 5
title Solaris
savedefault 1
rootnoverify (hd0,1)
chainloader +1
title Power off
savedefault 0
halt
The idea is to use GNU grub chain load Solaris grub and set default menu entry to "Power off" at the same time. When I need to power off the system, I issue "init 6" to reboot the system, then GNU grub will power off the system and at same time it set the default menu entry back to "Solaris". So next time, when the system waked up on Lan by the magic packet, it will boot Solaris. The down side of this solution is that I last the ability to reboot system.
It is really shame of Sun that as simple as grub is able to interact with ACPI and power off the system correctly.
Maybe you are looking for
-
So I got is iPad as a gift and the same issues I had with my iPhone 4S is also happening with my iPad. Will Apple cover the problem as it lies within there updates or something. All I know I have taken perfect care of both products and volume is dist
-
Custom field in Shopping cart header
Need to add a custom field at the header level of shoping cart. Pls help. Its all FPM and dont understand the logic. comp name - /SAPSRM/S_CLL_WD_SC_HEADER view - V_SC_BOFC_HD
-
Differences between XI 3.0 and PI7.0?
Hi Experts, I want to know the major differences between XI 3.0 and PI7.0? can anyone suggest me some weblogs which explains the all the new features of PI7.0.....as i'm very much keen to learn PI7.0 Thanks Faisal............
-
Counter output becomes unsnchronized when gated with an other counter
Dear all i'm using a PCI-6602 to generate a range of different pulse trains / retriggered pulses. Ctr0 is running at the experiments base frequency (T0) and is configured like this: Error = DAQmxCreateCOPulseChanTicks(T0TaskHandle, "Dev1/ctr0", "", "
-
How to turn off 'trust this computer' ?
how to turn off 'trust this computer' and transfer files to pc