I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?
Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing
Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling
Similar Messages
-
When I try to update Elements 9 I get an error message despite the fact that the update seems to download completely. Why?
Windows 7. Thanks, but why then do I get a downloading frame that seems
to indicate that it IS updating?
Mila and Bill
On 2014-12-12 14:44, Barbara B. wrote:
WHEN I TRY TO UPDATE ELEMENTS 9, I GET AN ERROR MESSAGE EVEN THOUGH IT APPEARS TO DOWNLOAD THE UPDATE COMPLETELY. WHY?
created by Barbara B. in Photoshop Elements - View the full discussion -
Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Updated music files on my hard drive and now itunes can't find path.
I updated my music files on my hard drive and now iTunes can't find the path. too many to manually do. can itunes refresh or should i delete all itunes music files and re-import?
Once a track is in your iTunes library, you should not touch it except through iTunes. But I guess you know that now.
iTunes, to answer your question, cannot "refresh." If you re-add those files to your library, iTunes is unable to match them with the existing library entries, and will create a bunch of duplicate entries. This is a longstanding shortcoming of iTunes (and the source of lots of traffic on this fourm).
If there are "too many to manually" reassociate, then starting over, in the sense of deleting and then re-adding, may be a good plan. -
I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!
" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod. -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well. -
when trying to access itunes, i get an error message that MSVCR90.dll was not found and to reinstall the program If I uninstall and reinstall itunes, will I lose my library
See Troubleshooting issues with iTunes for Windows updates.
Your library should be fine, but you ought to back it up regularly.
tt2 -
I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.
Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
*To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
*The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
*I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
Much Respect
Lammo -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.
Any suggestions please?
-
When i install or reinstall the new itunes i get an error message that says:
when i install or reinstall the new itunes i get an error message that says:
apple application support was no found.
apple application support is required to run ituneshelper. please uninstall itunes, then install itunes again.
error 2
thats all it says ive tried to reinstall uninstall ive done all that and it wont work. i use windows 7
please help me!!Yeah, this is absolutely ********. I have t5he same message, only i just started getting it when my Iphone4 went in to recovery mode.
I uninstalled itunes, downloaded the lates itunes just now, reinstalled it and got the same message.
So, i did some more google research, and saw a recommendation that rather than installing itunes, one should unpack it with win zip, or win rar.
I did this, and even though I just downloaded the apple software today, when i try installing application support, i gwt a message saying A LATER VERSION OF APPLE APPLICATION SUPPORT IS ALREADY INSTALLED.. go figure! Du-uh!
So, i uninstalled the new itunes, went - control panel-programs- and dis a search for apple application support, found it and deleted it too.
Resinstalled itunes and again the same message.
unistalled everything again, tried installing application support first, then itunes, and now I get a message saying ITUNES WAS NOT ISNATLLED CORRECTLY!
I am so annoyed right now, that if my puter was a person, I would be in Jail!
lol -
When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGCWhat's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.
Maybe you are looking for
-
How to make the client connect to the server at the command prompt?
I found this code on IBM's website, it was a training session on servers and clients using java. The code compiles fine and the server seems to start up properly when I use java Server 5000. I think whats happening is the server is running and listen
-
Use 2 carriers on at a time and keep the settings active?
Can somebody please advice me on the following: I use 1 Dutch Vodafone BB subsription + device while in Europe and 1 Indonesian Telkomsel BB subsription + device while in Asia. I now would like to go back to 1 device and replace my Dutch or Indonesia
-
3.6.16 will not start, it will not uninstall and 4.0 will not install, how do I fix this?
I tried to revert to 3.6.16 after uninstalling 4.0 (because it deactivated too many of my add-ons). Now Firefox will not start at all. I followed the instructions that applied to me in "Firefox will not start" but it had no effect. I tried system res
-
I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".
-
I want to know how to use "Trace" in Java Platform Debugger Architecture. Trace displays traces of program execution. how to invoke it? Trace can be invoked as follows: java Trace options class args what in front of me is I set envoriment variant and