I am using Office for MAC 2008, when I switch to other applications on my MAC and then go back to Office window it never brings me back to the window I was working on. I have to click on the Window tab, but my window is ticked but not appearing. Why?
I am using Office for MAC 2008, when I switch to other applications on my MAC, to copy and paste something for instance and then go back to Office window it never brings me back to the window/worksheet I was working on. I have to click on the Window tab in excell for instance, but my window is ticked but not appearing. I then have to click on one of the other open files and then click back to the sheet I was working on for it to appear. Can any one tell me why?
Does that happen only on web pages that are running a Flash presentation? <br />
When Flash "steals focus" from Firefox, you need to click outside the Flash presentation in the browser window, to regain focus in Firefox. A major problem arises when the Flash presentation is in the entire browser window, though. The Firefox developers are working on fixing that in Firefox, but it doesn't look like a fix is going to make it into Firefox 4.0, though.
Similar Messages
-
While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the software on a second computer. But I also read lately that I will only be allowed to work with one computer. I want to work on both of my computers without de/installing and de/activating the software every time. Is this possible? Thank you!!
You should be able to install the products on two computers as long as they are not running at same. Also the platform should be MAC.
You may download the product from
Download CS6 products -
i was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project?? PLEASE HELP!!!
iMovie on your Mac has nothing to do with iCloud storage. Download and use Find Any File to search for your iMovie project. FAF can search areas that Spotlight can't, like invisible folders, packages and system folders. If there a file with your file name on it anywhere on the hard drive FAF will find it.
Do you have Time Machine enabled backing up to an external HD? This situation is exactly what TM is good at. It makes hourly backups so you can go back to find and restore the missing file. All HDs crash at some time or another and having a good backup strategy is the only protection against that. -
Question??? When I open up an album in Photoshop Elements and then click on a picture to upsize it, it comes up blurry. I'm using a Mac.
Make sure Readr is closed. Go to the Applications form, look for the Adobe Reader icon, double click on it, and follow the lead. Restart Reader when finished.
-
I think I have this problem even on earlier version. The thing is I set open link in new tab and not switch over to the opened tab. My habit is to open a pdf page in the background and let it load first. What happen is that when the pdf page finished loading ( i do not set to download it), it hijacks my middle mouse button control. When i scroll down or scroll up on my original tab, it wont scroll on the tab, but insttead it scrolls on the pdf tab. I have to click on the pdf tab, then i can use the scrolling function on other tabs back. As for when i opened several pdf tabs, it seems i have to click on the tab that just finished loading, that means several times until they all finish loading. It has been getting on my nerve lately. And all pdf trouble i search from google led to unable to open pdf, firefox hang or crash when opening a pdf and the likes.
core-el, i don't see the advantage of that or i can't figure out how i'm supposed to use it. for starters, i have to click the mouse in order to get "add bookmark here" to open, which is no different than clicking on the star in the location bar, or right-clicking on the page. there are also options in the bookmarks toolbar, but they all require clicking the mouse & holding down the right button, etc.
my goal is to use keystrokes only. typing on the keyboard, using both hands, using the space bar & my left pinky finger to tab over are all painless routines for me. as soon as i have to take my fingers off the keyboard & use the mouse, the pain begins.
as i said, in older versions of firefox, all i had to do to bookmark a page was click ctrl>d, then tab over & arrow down, when appropriate, to find the folder & add the bookmark. for me, as a touch-typist whose speed is between 60 & 80 wpm, this is lightning fast.
if i have this wrong, please correct me. i just see it as more mouse clicks that don't save me time or pain. -
I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?
Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen. -
I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my info was gone and only "TRIAL VERSIONS" of CC apps were available. I paid for this software. I need to be able to download it again.
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon
How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US -
When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?
Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button. -
On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?
Start up in Safe Mode.
http://support.apple.com/kb/PH4373 -
I have the original iPad was working completely fine earlier today tried to use it now screen is blacked out... What do I do?..
not sure if you are referring to a hardware failure...but here are the initial things you should try
http://support.apple.com/kb/TS3281 -
Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda
I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.
-
Lightroom suddenly stopped while I was working in it. I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working. A problem caused the program to stop working. I have tried re-booting as well as reinstalling Lightroom 5.7 but whenever I try to start the program I get the same message.
Is that really the exact message you are receiving?
Maybe you are looking for
-
How to populate List Item from the table in a form builder
I want to know how to populate the List Item (pop up menu and combo box) from a table. Supposing I have a table Customer(cust_id,cust_name) and now I want to populate it in such a manner that I can update the data back to the database and also access
-
Dear Friends, I want to change the font of a the output which is in ALV List display. In classical reporting we can do it using 'FORMAT' but how will we do it in ALV output. Regards, Madan
-
Problem in Workflow matching step
Hi, I am facing a problem in Workflow matching step. I have user kaushikb assigned to it. Execution Type: Any Single, Assignee Type: User and Execution Type: Any Single. Match Record Scope: Records vs Records, Strategy: MDM_NAME. This Strategy: MDM_N
-
Switched from Premiere Pro 2.0 to FCP studio 2
and I couldn't be happier! No crashes fantastic rendering times simple work flow no glitches with Boris continuum the list goes on.... PLUS the advantage of working on a mac- which I'd never done before I have to say it was the best thing I could hav
-
Hi, how can I recieve the result from a PopUp? I have one Main-DC and one Selection-DC. The PopUp is in the Selection-DC and opend there. I would like to request the selected value to the Main-DC. How can I do that? Thanks, Peter