I brought apple lightining cable from authorised shop , but my i phone is not getting charged with that how can i know its orginal or not there is no printing on that cable and the wire is little harder than which i was using before it came along pho
I brought apple lightining cable from authorised shop , but my i phone is not getting charged with that how can i know its orginal or not there is no printing on that cable and the wire is little harder than which i was using before it came along with phone.., Please let me know is the cable is orginel or not ..
the phone says it is not charging even though it actually is. Check and see if that's the case. A very underhanded trick by Apple so they can charge 10 times what the cable is worth. They do not win admirers by that proprietary trickery.
Similar Messages
-
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?
Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data. -
IPod with dock connector is not getting charged with car charger and iTrip
My iPod from 2003 with dock connector is not getting charged in my car by using the griffin iTrip with USB car charger. iTrip works, but not the charger. Maybe there´s not enough power output from the car charger? Only 5.0V with 400mA are coming out. iPod needs more? 12V with 1.0A?
Does somebody have information about that problem for me?Has Apple dropped support for older model iPods?
Nope. Support is still there, even back to the original 1G iPod with the wheel that actually turns. I have a 3G iPod, and it syncs just fine. There have not been any software updates for years, but the old software still works fine with the latest iTunes.
You have to use FireWire, which you seem to be doing.
Try putting it into Disk Mode first, then connect it.
http://support.apple.com/kb/HT1363
Does the iPod currently play music as it should?
Do you have another docking cable (FireWire) that you can try? FireWire connectors often get worn and they no longer work, although the power connection can continue to work.
Did you try the other FireWire port in the iMac? -
I am working on a Garage Band Podcast. I have a 10 second video clip in the Movie track and want to loop it for the entire project. How can I co this?
Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.
-
I have submitted the webapp which is shown here : https://developer.apple.com/submission/iphone/manage_subs.php
But now I don't know the next step. Please somebody let me know.
Thanks.Wait for the blurb and link to show up on Apple's site. Be sure it is ready on yours.
-
How can I cancel my Adobe subscription?
Call 800-833-6687 but be prepared to wait on hold for a while, I just went through the process.
-
My Ipad does not have a software option so I do not get any updates - what can I do?
Check out the Apple link below.
http://support.apple.com/kb/HT4972 -
I have a website and I need people to find it. How do I create the text blurb that pops up on a search so they can find my website on page 1?
Google has tons of tools and articles to try. You could start here: http://support.google.com/webmasters/bin/answer.py?hl=en&answer=35769
-
As this is not my own computer and shouldn't have tried to update from Firefox 3.1 to 5, I did and now it won't work. This MiniMac has OS 10.4.11 on it and I would just like to go back to 3.1 without having to download from a third party site. Thanks.
There is no Firefox 3.1 as perhaps you mean 3.6.18
as of Firefox 4.0 it is Mac OSX 10.5 or newer and a Intel that is required.
Firefox 3.6.18 can be found at http://www.mozilla.com/en-US/firefox/all-older.html as just look in the Mac section and pick the language you want. -
what more can i say. when automatic updates occur, none of the microsoft security essentials are successful; but failed.
help please.Firefox are not the culprit for this kinda issue, contact microsoft support for more help
-
My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?
Christinag1317 wrote:
My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?
Ok when you refer to "memory" that is the Random Access Memory which is temporary memory the processor (worker) uses to store stuff while it's using it. Power goes off whats in the memory is gone.
Your storage drive is where data is pernamnetly stored if the power is on/off.
So what you really mean to say is your storage drive is filled up and you need to make some room.
You have a TimeMachine drive, what this does is makes a image of your internal storage drive as a backup method, it also allows some "back in time" restoration of your previous deleted files depending how much space is on that drive. The more space, the less data you have, the more days you can go back in time to retrieve something.
Unfortunatly the TimeMachine drive is not a extra space storage drive, it automatically rotates what appears on your internal storage drive. So if you delete something from the internal drive, it eventually gets deleted from the TimeMachine drive.
So you need to make some more room on your internal drive, this is rather easy, all you need is ANOTHER external drive and connect it to the Mac. Give it a name like ExtraStorage#1 and thenyou will have to decide which of your User files you really don't need on the internal drive.
For instance the best choice would be to move some movies out of your Movies folder to another MoviesExtra folder on the ExtraStorage#1 drive.
Movies take a LOT of drive space and you can always copy them on or off, or watch them from the ExtraStorage#1 drive as well. But if your going to do this a lot, you should consider getting a Firewire 800/400, USB 3,2,1 combination drive as Firewire 800 is fastest and decently priced (Thunderbolt is very high priced and overkill at this time)
The other things like Documents are quite small, Pictures can take a lot of space if you have a lot, but if you need them on the internal drive then that's better. Music one tends to use a lot or manage playlists and such, but perhaps some music you may which to move off or "prune", I suggest always burning data DVD's of music especially for extra backups.
Once you have freed some room on the internal drive, this liitle neat program will show you what is taking the largest amount of space on your internal drive.
http://grandperspectiv.sourceforge.net/
After a scan, right click on the big squares to "revel in Finder" to show you what's taking the largest amount of space, be warned it also opens up hidden system files and folders, which you won't be able to move. So concentrate on what's inthe Users folder.
Likely if you have a lot of Movies this is the biggest culprit on most standard internal hard drives. Also if you have something in iTunes that's auto-downloading something like PodCasts and not deleting the older ones and you forget. So go there and fix things and that can free up drive space.
If you bought a small SSD with your new Mac, then the price of that SSD has come back to haunt you with low storage space, you will have to think carefully what you can live without on the internal drive.
Once you have slimmed things down, TimeMachine will update to reflect your slimmer internal drive. What this means is there is only one copy of your data on the ExtraStorage#1 drive.
You need to maintain two copies of your data at all times on seperate hardware, so now you need ANOTHER storage drive (ExtraStorage#2) to copy everythinng of ExtraStorage#1, or else if you drop or have a mechanical problem with ES#1 all that data will be gone!
If you wish to learn more then I suggest reading these two links
https://discussions.apple.com/message/16276201#16276201
http://pondini.org/OSX/Home.html -
How can I know the name(s) of font from built-in font dialog from Word VSTO AddIns.
Hi, All !!
I would like to extract some values from the built-in font dialogbox "wdDialogFormatFont" through VSTO AddIns.
Figured out short codes;
Microsoft.Office.Interop.Word.Dialog
F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show( F_DLG.FontMajor.ToString() );
MessageBox.Show( F_DLG.FontHighAnsi.ToString() );
Ther last two lines (red ones) do not work at all.
How can I know the name of the fonts ? (English and Non-English)
In VBA, it works beautifully.
Thanks !!Hi,
According to the description, you want to get some options from the build-in dialog dispaly by code.
As far as I know, we can declare an dynamic object to achieve the goal. Here is the code for your reference:
dynamic F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show(F_DLG.FontMajor);
Also we can use refrection to get the property we wanted like below:
Microsoft.Office.Interop.Word.Dialog F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show(F_DLG.GetType().InvokeMember("FontMajor", BindingFlags.GetProperty, null, F_DLG, null).ToString());
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
how can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?
'''Did you backup whatever bookmarks you did have on the computer ? '''
Remember any restoring of bookmarks overwrites whatever he current set is, and you may not want to loose them.
Even if up until now you have not made any backups of Desktop bookmarks Firefox will have backed up some of them into sets of daily bookmark backups. Once you have backed up your current set you could look at what it has by restoring those bookmarks, you may find one of those sets is fairly complete.
By the way if you look at the profile files and folders that you should now have on the desktop you should see it contains a bookmarks backup folder, the size of the files within should indicate whether they contain anything.
You need to go into the bookmarks library and try the restore option. Backup each set that you look at if it has anything of use in it, before trying the next set. With look one of those will be a fairly complete set of bookmarks.
* USE '''Show All Bookmarks -> Import and Backup -> Restore '''
** see [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]_restoring-from-backups
I do not use Firefox on mobiles, but before you try anything further you do need to backup the desktop bookmarks and learn what existing backups you have. Unless you master that you are in continual danger of overwriting and loosing bookmarks.
Presumably you have already found this listing of help articles for mobiles
* [/products/mobile/bookmarks] -
How can we know the size of the dimension(in Line item Dim)?
Hi to all experts,
We use Line item dimension if the size of dimension is 20% or more of the fact table. My doubt is that how can v know that the size of the dimesion is 20% or more of FT?. But we never store MD in dimension tables......So please help me to understand this scenario? Thanks in advance.Hi
Normally before modelling you will assume the number of entries in your master data and transactional data..
If your dimension is having 3 characteristics
say A,B .....and these characteristic values are say
A---10,000( Total number of master data records)
B----7,000( Total number of master data records)
then your dimenstion would be 10,000 * 7,000 =700000000
in this case you better keep A in a dimension and B in another dimension.
Normally SAP recommends your dimension table shouldnot exceed 100,000...
so whenever you expect a characteristic is having more values then you should make it as line item...
If you want to add a new characteristic to the existing model then you can decide by comparing the ratio of dimension table to the fact table..
Please have a look at the below url for sizes
dimension size
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 24, 2008 12:19 PM
Maybe you are looking for
-
LOV as parameter for method stuck as read-only, needs to be selectable
Hi, I have a method that calls a stored procedure, and I need to pass in a value selected from an LOV. I build a VO based on a SQL query. I drag in the method as a form. Then convert the input text to an LOV and select the corresponding VO. The form
-
this topic is about 5800Xpress Music When I was working with my 5800 the screen turns blank and the menu flashes frequently then I turn off my phone and now when I want to turn on my phone there is only NOKIA logo in white page and no respond. Plea
-
Gurus, My database Release is : 9.2.0.6 running in SPARC 5.9 64-bit When i ran statspack, i found log file sync problem Top 5 Timed Events ~~~~~~~~~~~~~~~~~~ % Total Event Waits Time (s) Ela Time log file sync 63,909 29,611 48.07 log file parallel wr
-
Latest Itunes update has ruined itunes and rendered ipod unsupported.
itunes updated and after having to go through a mess to fix it (ie) I had to delete all my apple related programs and reinstall itunes (11.1.4.62) to get it to work at all, now my ipod says "unsupported accessory is not supported". How do I fix this
-
Sytsem Variable for Check Register Report
Hi all. Does any one know which Sytsem Variable for Check Register Report that will show the total for the FC amount. The one on our report now shows the System Variable 62 which is system currency