I can not print from QUICKEN . I have tried selecting the HP 960c series as per your directions,

I need help.  I can not print from QUICKEN to my HP Officejet J6480 printer.  Nothing happens.   It was working in the recent past.  NOw that I need to print out the remainder of my record for income tax prep, it won't print. I can not thinnk of a single thing that I have doen differently.  I followed the directions to have a second printer   HP 990c  to "fool" the program into using it but it still does nothing.   I have downloaded drivers etc, unplugged and replugged etc.  "QUICKEN"  is useless and says that HP is working on  it.   Can someone help me please

Hi there morinallen,
Try downloading and running the print and scan doctor located here to ensure there are no software conflicts:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • HT201412 I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avai

    I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avail. HELP

    I had a similar issue and it was password case sensitive issue

  • I have a new iPad mini but can not activate it.  I have tried restarting the iPad with no luck.  What else can I try?

    I have a new iPad mini but can not activate it.  I have tried restarting the iPad with no luck. What else can I do?

    My Mac Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac4,1
      Processor Name:          Intel Core Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          1.5 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM41.0055.B08
      SMC Version (system):          1.1f5
      Serial Number (system):          W8******U2P
      Hardware UUID:          ****
    <Edited By Host>

  • I can not print from  OS X 10.7.5

    I can not print from  OS X 10.7.5 anyone have any ideas?

    I installed the update this morning. I was printing just fine yesterday before the update. I am trying to print to a Xerox Docucolor 242, a Xerox 4595 and a HP Designjet 5500. I have unplugged and rebooted everything numerous times. I was on the phone with apple support and they came up with call the manufactuer and see is the have updated drivers. I am beyond frustrated!!!

  • I can not print from Firefox, Firefox is not responding

    I can not print from Firefox on one PC in my office. At one time printing was operable from Firefox on this PC, the user told me about one month ago Firefox would no longer print.
    I went to the users PC - Windows XP Professional SP3 - Firefox opens no problem, I can go to any website, but when I click on the print icon, or file, print, nothing happens. I do not see the print icon in the task bar which shows you something is spooling, printing, I open Task Manager and I see Firefox is Not responding. I must end task.
    We can print anything else on the PC, Internet Explorer 8 prints successfully, just Firefox will not print.
    I also uninstalled the network printer, re-installed. Connected to another network printer, Firefox still will not print.
    I also uninstalled the latest version of Firefox on the PC 15.0.1, went back a few versions and Firefox still will not print.
    Can someone assist why Firefox refuses to print and when you try to print Firefox goes to a Not responding status ?
    Thanks,
    Bob

    Hi Bob12
    try to [http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer Reset printer] in [http://kb.mozillazine.org/About:config about:config] and check it again.
    thank you

  • HP Officejet pro 8500A plus can not print from ethernet connect computer

    Setup:
    HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
    Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
    Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
    Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
    Windows7 device & Printerhows printer is ok.
     Once  a job is sent to printer, show status printing for a while after the status will show error.
    Now the status shows error
    HP Print and Scan doctors shows printer ok.
    But if you try to print the test page, unable to communicate to printer error comes.
    Tool box can read all information about the printer

    Please reload the drivers and software on the Win7 PC.  Reconfigure and try again. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I can not print from my windows xp pc to my 5520 printer

    i can not print from my windows xp pc to my 5520 printer. im on the network and pass all online tests but my computer wont recognize the printer. i can do the eprint or print from a phone or even send an email to the printer. all that is fine its just my computer wont seem to pick up the printer.
    ive tried everything, cd, usb,online help, uninstall/reinstall. nothing seems to work...
    only issue it might be is that my pc is also on a wifi network.

    Hi Bigchief247,
    I understand that you're having issues with printer printing from your computer.   I would try the Hp Print and Scan Doctor it fixes many common printer problems.
    Hp Print and Scan Doctor.
    Let me know how it goes.

  • I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    I have a mid-2010 27" Quad Core i5 iMac running 10.8.3.  Startup disk recognizes the primary hard drive as a startup volume but will not boot from it.  Have tried zapping PRAM, ran disk utility.  No errors reported  Any thoughts?

    My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

  • TS1559 I have an iPhone 4s, after updating the phone to ISP 6 my wifi on/off is a dim grey colour and I can not switch on wifi, I have tried restor, reset network settings and updated to ISP 6.0.1 wifi will not work. This is VRF frustrating can anyone hel

    Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Using "Pages" as my word processor I can not print a Standard page.  Trying to print several copies of a single page gives me every thing parented back to back.  What do I do to fix this?

    Using "Pages" as my word processor I can not print a Standard page.  Trying to print several copies of a single page gives me every thing parented back to back.  What do I do to fix this?  (Using iMac OS 10.9.1 and Canon iP4200 printer)

    You have Duplexing turned on. Turn it off.
    This is to do with your Printer Driver and has nothing to do with Pages.
    Peter

  • Hello, I just bought a Snow Leopard and I have tried ti install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.

    Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
    Thanks

    Here are the directions:
    http://support.apple.com/kb/HT3910?viewlocale=en_US
    Ciao.

  • I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac.  I have tried all the usual solutions but nothing works.  It has worked recently but not in the last week. Help

    I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac.  I have tried all the usual solutions but nothing works.  It has worked recently but not in the last week. Help

    make sure it's not being connected to by any of the other two
    one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
    automaticly
    then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac

  • On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.

    On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.
    MoragaTom

    I have the same problem on my iPhone - an app I want to delete but can't. The app in question doesn't show up on the list of apps i iTunes and doesn't show an 'X' when it starts to wiggle. All the other apps do, but not this one. It's definitely an app. How do I get rid of it, please?

  • Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling :(

    keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling
    I recently bought some new albums and can't play them on my ipod

    I just encountered the same problem on my 2 month old MBPro.  I found a work around by changing USB ports.  As for the actual cause or the reason why that worked, I dont know.  The USB port I was using works fine with my phone or other USB devices.

  • When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

Maybe you are looking for

  • Slide advancement?? Not working as expected.

    I imported a PowerPoint presentation, I thought I picked the option to advance on mouse click - it does not seem to be working. I am pretty new at Captivate 5 so I was wondering if there is another way to make this work or some where I can check the

  • ISE Guest Self Registration Portal

    Hi, I get the Guest portal page and my credentails authenticate correctly and the device is authenticated using MAB. Then i get this message This device has not been registered You need to manually configure your device Your device configuration is n

  • Load balancing across multiple paths to Internet

    Hello, I have a 2821 router. Currently, I have two bonded T-1 circuits to the Internet. I would like to add a DSL circuit to augment the T1s. I would also like to load balance across all of the circuits. Currently, IOS performs inherent load balancin

  • DefaultStyledDocument trim problem

    Hi all, JTextPane pane = new JTextPane(); DefaultStyledDocument temp = new DefaultStyledDocument(); temp = (DefaultStyledDocument) pane.getDocument(); is there any way to trim the document, like string. I wnat to trim the spaces and new empty lines i

  • Changing iPhone icons/9 page limit

    Hello, I was wondering if currently there was any way to change the icons used on the iPhone like you can in OSX. Also, I've hit an app barrier at 9 pages and cannot load in anymore. Is there anyway to expand beyond this limit? There are so many cool