I can't make video snapshots after upgraded to Sky...

After todays upgrade from Skype 7.0.0.82(?) to Skype 7.0.0.102 I have lost the possibility to make videosnapshots? How to be able using videosnapshots again?
I use Win8.1.

Please,  run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

  • Urgent! Phone can't make phone call after upgrading to ios 6

    Hi guys,
    I use my US factory unlocked iPhone 4s 32GB in China (Carrier is China Mobile). The phone can't make phone call (has no carrier service signal) after I upgraded its OS to ios 6. Does anybody know how to fix this problem?
    The facetime also missing after upgrading to ios 6.0
    Thanks in advance!

    Whenever I see "factory unlocked" I get suspicious, because there is no such thing as "factory unlocked". If you purchased the phone directly from Apple and the receipt says "unlocked" then it is unlocked. If you did not purchase it directly from Apple it was hacked to unlock it by whoever you bought it from. The "factory" was the back room of the shop. Unless you bought it directly from Apple (or an Apple-supported cellular carier) your phone was hacked, and updating it undid the hack. If this is the case there is no solution that can be discussed in an Apple-hosted forum.
    If you really did buy it unlocked directly from Apple then razmee's suggestion is the way to go.

  • Can't make calendar entries after upgrade to OS5

    I recently upgraded my iphone 3gs from OS4 to OS5.01.  Now I cannot make any calendar entries.  The + sign in Calendar is no longer visible.  I have seen a few other reports of this in other discussions, but so far no solutions.  Is there a fix available for this?  If not, can I revert back to OS4.x which worked fine and wait for a future release of OS5?

    Problem resolved.  Went to Settings > iCloud and turned on Calendar.

  • I can't update my apps after upgrade to iOS 6...?

    I can't update my apps after upgrade to iOS 6

    Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
    Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
    Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

  • Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

    I can't add new contacts after upgrading from Snow Leopard to Mountain last week.  I do not use iCloud.  Any suggestions?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    What troubleshooting steps have you tried?  Have you tried resetting the iPhone? or restoring it?

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can't to connect WiFi after upgrade to 10.7.1

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

  • What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

    What can I do about this:
    After upgrading to firefox 6, I get this error.
    When I click to open Firefox, A box open with the following error:
    JAVASCRIPT Application
    TypeError: Components.classes[cid] is undefined?
    After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

    You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
    Also see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Why I can not make video calls on Facebook?

    why i can not make video calls on facebook !

    I don't believe Facebook offers video calls as a service.

  • Can't open old mail after upgrade to yosemite

    can't open old mail after upgrade to yosemite OS X 10.10. My old mail was version 6.6. The new version is 8.0. What to do??

    How are you trying to open it, and what exactly happens?

  • HT2477 how can I make a snapshot of my screen?

    how can I make a snapshot of my screen?

    Command-Shift-3: Take a screenshot of the screen, and save it as a file on the desktop
    Command-Shift-4, then select an area: Take a screenshot of an area and save it as a file on the desktop
    Command-Shift-4, then space, then click a window: Take a screenshot of a window and save it as a file on the desktop
    Command-Control-Shift-3: Take a screenshot of the screen, and save it to the clipboard
    Command-Control-Shift-4, then select an area: Take a screenshot of an area and save it to the clipboard
    Command-Control-Shift-4, then space, then click a window: Take a screenshot of a window and save it to the clipboard
    In Leopard and later, the following keys can be held down while selecting an area (via Command-Shift-4 or Command-Control-Shift-4):
    Space, to lock the size of the selected region and instead move it when the mouse moves
    Shift, to resize only one edge of the selected region
    Option, to resize the selected region with its center as the anchor point
    http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

  • Can I make videos

    Can I make videos with Adobe Photoshop Elements 12

    No. On Windows you can make a slideshow and cerate a small wmv file.
    Premiere Elements 12 is the Video Editor.

  • Good day, I can not make video calling with my MAC PRO 15 with FB Mountan Lion operating system   how can I do?    you can you help me? thank you very much

    good day,
    I can not make
    video calling
    with my MAC PRO 15
    with FB
    Mountan Lion operating system
      how can I do?
       you can you help me? thank you very much

    francesco marraffa wrote:
    good day,
    I can not make
    video calling
    with my MAC PRO 15
    with FB
    Mountan Lion operating system
      how can I do?
       you can you help me? thank you very much
    Are you running your MacBook Pro off WiFi or Ethernet?
    Pete

  • I can't receive phone call after upgraded to 6.1.2

    I can't receive phone call after upgraded my iphone 5 to 6.1.2
    Sometimes it works, but sometimes it doesn't.....
    Please help!!!

    go to settngs, general, reset, reset network settings, if that does not work then follow this link and restore the phone.
    http://support.apple.com/kb/ht1414

Maybe you are looking for

  • Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

    Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts) I 've also posted this issue here but got no response. https://forums.oracle.com/threa

  • How to deactivate highlighting of current items in crimson theme ?

    Using demo application on ApEx 4.1.0.00.32 (apex.oracle.com). - Create a new theme using repository theme number 23 (crimson) - Switch Sample Application to Crimson theme - Edit page 7 - Edit P7_CUST_LAST_NAME - Set 'Begin on New Line' to No ( first

  • Column Name in BI Reports

    Hi, I have about 80 reports that are running in various dashboards. Each of those reports is an Answers request. Is there a way to find out if a particular column is being used in which report without going through each report manually? Thanks, rking

  • Cannot install latest version of iTunes

    when i try to install the latest version of iTunes this's the message i got this iTunes installer is intended for 32 bit version of windows> Please download and install the 64 bit iTunes installer instead

  • Signalling a running process.

    Is there a way to signal a running process (ie an executable) that doesn't have a gui or command-line interface ? I have an application that runs on its own but I'd like to be able to signal it occasionally somehow to get it to read a config file to