I can't open the micro usb cover in my smartwatch 2

I can't open the micro usb cover in my smartwatch 2.
Somebody can help me ?

It can be a bit tricky to open the USB-cover, but there is a small slit over the USB-cover where you can put in your nail and pull it out.
You could also use a paperclip to get out the cap a little so you can easily open it your finger, just be careful so you don't harm the gasket which is on the inside of the USB-cap.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

AT300se...can I connect to TV via the micro USB port?

Hi, I was wondering if I can connect to my TV using the micro USB port on the AT300SE model tablet. This version does not ahve the micro HMDi port so i was wondering if I could use an adapter to conenct to my TV via the micro USB? Thanks, Nikos
Solved!
Go to Solution.

Looking at the specs, this tablet does not have HDMI. So I see no way you can connect it to your TV. Some of the newer TV's may be able so share your network to play files that are on your tablet.

I can't open the slot to get my micro SIM card in my new iPhone 5?

I Have just got the new iPhone 5 I can't open the slot to get my micro sim in. I have used the little tool but it won't budge. Help!

Tried a paperclip doesn't work. When I push it in the little hole it's as if it hits a wall or something nothing happens. Have I pushed it too hard?

Does A- 1 can use the otg to connect the micro usb to the usb drive?

We have a question? Can we use the otg in A 1 to connect the micro usb to the usb drive?

Of course it can , there is a lot of cheap Gingerbread based tablets with OTG mode enabled f.e.
http://www.lark.com.pl/freeme701.htm
http://translate.google.com/translate?sl=pl&tl=en&js=n&prev=_t&hl=pl&ie=UTF-8&layout=2&eotf=1&u=http...
It just proper kernel compilation settings issue.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

You can't open the application "..." because it is not supported on this type of Mac.

I migrated all files from OS 10.7 to OS 10.8 through time machine. However, I always see error packages like the following if I want to run some .pkg files.
You can't open the application "..." because it is not supported on this type of Mac.
But when I switch to a different account, then the .pkg files can be run. Therefore, I think that there might be something wrong with my account configuration files. But I don't know which one. Does anybody which one might cause the problem and how to fix it? Thanks!

softwater wrote:
And both are on the same startup disk, right? Because, to be honest, it's hard to figure out how you could have this problem with both accounts on the same startup disk, so I just want to check that before we get too involved.
Assuming that's the case, the first thing I'd do is remove all those except Dropbox from the list, then restart the mac and test for the problem. If that doesn't solve it, run this free analytical tool and post the results back here so we can see if anything stands out:
http://www.etresoft.com/etrecheck
I have removed these login items. But I can not restart my mac now and I will have to restart it later.
Here is the output of etrecheck. Would you please take a look if there is anything wrong?
Hardware Information:
    MacBook Pro - model: MacBookPro9,1
    1 2.6 GHz Intel Core i7 CPU: 4 cores
    16 GB RAM
Startup Items:
    CUDA - Path: /System/Library/StartupItems/CUDA
System Software:
    OS X 10.8.2 (12C3006) - Uptime: 3 days 2:52
Disk Information:
    APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
        disk0s1 (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) /: 749.3 GB (311.8 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple, Inc. Keyboard Hub
        Logitech USB-PS/2 Optical Mouse
        Apple, Inc Apple Keyboard
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
    com.eltima.ElmediaPlayer.kext    Version: 1.0
    com.bresink.driver.BRESINKx86Monitoring    Version: 8.0
    com.nvidia.CUDA    Version: 1.1.0
Problem System Launch Daemons:
           [failed]    com.apple.emond.aslmanager.plist
           [failed]    com.apple.xprotectupdater.plist
Problem System Launch Agents:
           [failed]    com.apple.afpstat.plist
Launch Daemons:
           [loaded]    com.adobe.fpsaud.plist
           [loaded]    com.cisco.anyconnect.vpnagentd.plist
           [loaded]    com.eltima.ElmediaPlayer.daemon.plist
           [loaded]    com.google.keystone.daemon.plist
           [loaded]    com.timesoftware.timemachineeditor.backupd-auto.plist
           [loaded]    io.redis.server.plist
           [loaded]    org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
           [loaded]    com.adobe.CS4ServiceManager.plist
           [loaded]    com.cisco.anyconnect.gui.plist
           [loaded]    com.google.keystone.agent.plist
           [loaded]    com.Logitech.Control Center.Daemon.plist
           [loaded]    com.nvidia.CUDASoftwareUpdate.plist
           [loaded]    org.macosforge.xquartz.startx.plist
User Launch Agents:
           [loaded]    com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
           [loaded]    com.akamai.single-user-client.plist
           [failed]    [email protected]
           [loaded]    org.apache.couchdb.plist
User Login Items:
    Citations
    Dropbox
    Xmarks for Safari
    VNC Viewer
3rd Party Preference Panes:
    Akamai NetSession Preferences
    CUDA Preferences
    DivX
    Flash Player
    FunctionFlip
    Logitech Control Center
    NuFile
    SwitchResX
    TeXDistPrefPane
    Xmarks for Safari
Internet Plug-ins:
    AdobePDFViewer.plugin
    DivXBrowserPlugin.plugin
    Flash Player.plugin
    FlashPlayer-10.6.plugin
    Google Earth Web Plug-in.plugin
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    JavaAppletPlugin.plugin
    NPDjVu.plugin
    PrintDialogExt.plugin
    npgtpo3dautoplugin.plugin
    OfficeLiveBrowserPlugin.plugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
    None
Top Processes:
    11.1 %    WindowServer
    1.4   %    EtreCheck
    0.3   %    vncviewer
    0.1   %    beam.smp
    0.1   %    ps
    0.1   %    JavaApplicationStub
    0.0   %    Cisco
    0.0   %    CoreServicesUIAgent
    0.0   %    Dictionary
    0.0   %    AdobeAcrobat

Working on linking one pdf to other documents and got and (43) error and can't open the main pdf.

Working on a pdf document linking to other pdfs and got a (43) error message and can't open the document. How to fix.

Hi dotcofton,
Is it possible that the PDFs you're working on are on a USB? Windows can return this error when a device is no longer accessible by Windows.
Please let us know if that is not the case, and we will go from there.
Best,
Sara

You can't open the application System Preferences because it may be damaged or incomplete.

You can't open the application System Preferences because it may be damaged or incomplete.
say this and same on mac store when i press app

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

You can't open the application "TeacherWorks" because PowerPC applications are no longer supported.

When I try to open an application I get this message: You can’t open the application “TeacherWorks” because PowerPC applications are no longer supported. I updated my MacBook Pro to Mavericks a month ago. So I do not know what is going on. I am not good with computeres, so please if you will try to help me, please be very simple.
Thank you

There isn't really a simple answer to your dilemma.
You have discovered that there is older software that will no longer work on OS X Mavericks.
Your version of TeacherWorks was programmed to run on much older non-Intel, PowerPC style Macs that were discontinued around 2005-2006.
If your Mac was running OS X 10.6.8 Snow Leopard previously, Snow Leopard had a special emulator software, called Rosetta, that emulated older PowerPC hardware to allow this software to function.
This Rosetta emulator software got deleted/obsoleted from OS X with the introduction of OS X 10.7 Lion.
So, this software will no longer function.
The alternatives is to see if there are newer updates of this software that needs to be downloaded and installed.
OR if this software no longer exists or is no longer being updated, then you need to search for and seek out alternatives that are similar in features to this software.
There is a way to get your existing TeacherWorks software to work on Mavericks, but it gets involves using a special virtualization software like Parallels Desktop, VMWare Fusion or the free, open source virtualization software called virtual box to install OS X Snow. Leopard Server within the virtualization software.
You purchase, download and install this virtualization software.
And you need to call Apple at 1-800-MYAPPLE to see if you can still purchase copies of OS X Snow Leopard Server.
Once you have OS X Snow Leopard Server installed and you launch it, you can, once more, install your existing TeacherWorks software.
This is the only way to run this type of older software in OS X Mavericks.
If this is too complicated for you, if you made a backup of your previous system setup and data, all you have to so is revert to your previous system,
If you have no backup of your system or data, you need to backup, at least, your important data by either burning CDs/DVDs, copy this data to high capacity USB Flash Drives or backup to an externally connected hard drive.
Then, you need to do a complete clean install of your previous OS X version from disc, redormat the hard drive which will completely wipe your hard drive of data! and reinstall your previous OS, all of your applications and then restore all of your data.
There is no other way to do this if you have no viable backup.

I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

My BlackBerry PlayBook won't charge when connected to the computer via the micro-USB to USB cable

Can anybody help me? I don't know why but lately, when I try to plug my BlackBerry PlayBook into my Windows 7 laptop using the micro-USB to USB cable, it connects to my computer without any problems but it won't charge. Instead, I get a notification in the top left corner saying "Unable to charge battery with connected sorce". I have four USB ports and I'm positive that they work just fine because I plugged in some of the USBs I own into each of those four ports and they recognized the USBs without any issues. Does anybody know how I can resolve this issue? Thanks.

The notification is by design and was added to clarify that USB charging is not to be relied upon as a main method of charging. Instead RIM's good intention has caused confusion.
USB (by design) can not provide the amount of power the device needs while it's being used. Technically, it is still trickle charging but the screen has to be off (and I'd turn off Wi-Fi too) since they are high power draining items. I have verified that the PlayBook does indeed still charge but it takes much, much longer than plugging it into a wall charger or rapid charger. In a crunch it will work but the computer has to be on the entire time. A full charge would take many hours.

I had put apple tv to update and later noticed that it is requesting for connecting the micro USB plus the white light blinking

I had put apple tv to update and later noticed that it is requesting for connecting the micro USB plus the white light blinking

Yeah.
#FAIL #FAIL #FAIL
Since our preemie woke me at 04:00 this morning and I had nothing better to do--I let the ATV3 connected to our "main viewer" 'update'.
Got a screen showing what at first bleery-eyed glance looks like a HDMI-to-iPod/iPhone/Ipad cable wanting iTunes.
Fast blinking white indicator light.
Pretty much BRICKED.
I shall attempt the USB-mircoUSB after another cup of coffee.
Really GLAD I did not update the two ATV2s.
UPSIDE: discovered that one can make the same content play on ALL ATVs simultaneously from iTunes on the main machine...

Can Ideapad Lynx k3011 micro USB port use for data communication?

Greetings,
I would like to connect on one end an VAG-Com USB dongle (http://www.ross-tech.com/vag-com/hex-usb+can.html) via a Micro USB adaptor to the tablet and the CAN bus to my car on the other end to turn some car features on and off. Can the Micro USB port on the tablet be used as communication device to achieve this?
Thanks,

Just check ebay or http://www.parts4repair.com/brands/Sony.html
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Can't open the applications for Hewlett Packard since upgrading my operation system

HP Photosmart C6280 All-in-One operating in OS 10.8.3.
I recently upgraded to OS10.8.3 and since doing so, I am getting this message, "You can't open the application HP Scan Pro becasue PowerPC applications are no longer supported." I tried to download a new driver and that didn't seem to work. What do I need to do?

Hi,
The HP Scan Pro is an older software verison, intended for Leopard (10.5) or older OS versions.
Unplug the printer if it is connected via USB and uninstall any incompatible software by following the HP Uninstaller, located under Applications > Hewlett-Packard.
Next reboot your Mac and follow the steps below to install the printer on Mountain Lion:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&cc=us&dlc=en&lc=en&product=3194498&tas...
Once installing the latest software you may scan by following the steps below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

C6 Can't charge via Micro USB

Idiotic
I guess thats gonna be 2 more chargers needed then... one for the car and one for the office. And when the phone is at the office, it needs to be plugged in at BOTH ends, one for charge, the other for sync.
I simply can't understand what the hell Nokia were thinking about with sticking a Micro USB connection on the phone and then not using it for charging!, especially since they have signed the EU memorandum agreeing to adopting the Micro USB charging standard by 2011.
http://ec.europa.eu/enterprise/newsroom/cf/itemlongdetail.cfm?item_id=3241
Nokia like to profile themselves as green - way to go for adding to the thousands of tonnes of electronic waste thats thrown away in Europe each year...

You can probably guess that im not gonna press the little green star for that response!
The C101-D is simply shorter, and as Nokia website states "this lightweight cable enables you to quickly transfer data or charge your compatible device while on the go."
http://europe.nokia.com/find-products/accessories/all-accessories/memory-cards-and-cables/cables/nok... The C6-00 is listed at a compatible device, on the linked page. therefore it should charge.
I also have a C101 cable from a previous phone, it doesnt charge the C6 either.
I'm perfectly aware of what year it is, but given that every other Nokia model with Micro USB can also use this connection for charging, and given Nokias clear committment to Micro USB as a charging standard, its inexcusable that USB charging doesn't appear to work on the C6, especially with the lack of any clear information/documentation about this limitation.
I'm currently awaiting Nokia Customer Care rsponse on this, since in my view this is a serious defect. Let's see if it is something that can be fixed with a software upgrade or not.

I can't open the micro usb cover in my smartwatch 2

Similar Messages

Maybe you are looking for