I cannot block some advertisements in the journal De Telegraaf, in The Netherlands. When I move the mouse to blokkeren (Dutch) this blokkeren disappers. How to solve it?

I cannot block some advertisements in the journal De Telegraaf, in The Netherlands. When I move the mouse to blokkeren (Dutch) this blokkeren disappers. How to solve it? edit

You cannot boot an iBook from an external USB drive--only a firewire drive. Actually, the drive is just a drive--it is the enclosure that determines USB vs. FireWire. If you could find an appropriate firewire enclosure, you could remove the drive from the USB enclosure and place it in a firewire enclosure and then be able to boot from that. Or you could just purchase an external firewire drive if those are available where you are.
FireWire external drives are quite useful. One option would be to mount the external drive on the good iBook, format it properly for OS X with Disk Utility, and then use a program like Super Duper to make an exact clone of your internal hard drive. This is a popular way of backing up your stuff. You can boot from either the internal or the external. This means that if your internal hard drive were to die, you would have all your stuff on the external, and could run off of that. Since you are already using the USB for backup, it would probably be best to acquire a new firewire drive for troubleshooting and testing if you decide to go this route, since you really don't want to lose your existing backup.
If you did have a bootable clone, you could see if the sick iBook would boot from it or not. However, it may be more productive to pursue your other thread about the boot problem. I see that Richard has joined the thread as I had hoped he would. He actually works on iBooks and is very knowledgeable.
Also, if you do get the second ibook working and want to install OS9, you might want to post a question in the "Mac OS X v 10.3 Panther and earlier" forum. I'm not up on this myself, but I believe there is something about installing OS 9 drivers while formating or something like that. I believe the smart guys on that forum could give you some guidance so that you can avoid the problems you encountered earlier.
Good luck!

Similar Messages

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

The file "Acceptance Letter.pages" doesn't exist. Since installing Yosemite on MacBook Pro I cannot save or export from Pages. Just get the message at beginning of this post. How to solve problem?

I cannot save or export from Pages since installing Yosemite on MacBook Pro . I just get the message at beginning of this post “Acceptance Letter.pages” doesn’t exist or whatever file title I have inserted How to solve problem?

Thanks Peter but I was not seeking to store with I-Cloud. In fact I never store documents with I-cloud.
I was in fact trying to store the files to Documents, which is where I usually keep such things.
Have now discovered that if I leave the file untiled and simply close it, rather than saving it then it will save, oddly, to Documents. I then have to re-title it and move to the folder I want it in.
Despite the above, even once it is titled and saved in Documents then if I reopen it I still cannot then Export it to a Word or PDF file. I still just get the message . xxxxxx.pages does not exist!
Bad news as I am constantly exporting documents to Word and PDF to send to others who do not use a Mac

When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!

When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

I want to add some fields in the report of FBL5N, Can anybody tell me how ?

I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.

Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer. 2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some. NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

Salut!
The scenario is "Find bookmark existed before and recall which bookmarkfolder it is in"
Please note the "folder" is for "bookmarks", NOT a file folder of HDD-filesystem
1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer.
2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some.
NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

Hey, guys. Thanks for responding. I really didn't know I was so clueless about this stuff.
I really thought "urxvt" could be used as an alias or, what we called in Debian, an alternative, to the rxvt-unicode-256color command. I guess not? I'm still trying to set up "vi" to be Vim as well, and I'll read more of the Wiki to figure that stuff out with Arch.
So in the tty interface I can start zsh again just fine. That's old news. I removed the TERM setting and placed the resource in my .Xresources that derhamster said. Thanks.
I also replaced the line in my Openbox rc.xml and menu.xml for terminal opening commands (can I use $TERM for those?)
Now when I start Xorg (with Openbox running) I tried both urxvt-unicode-256color and urxvt but none of them work with Openbox. No terminal emulator pops up and no errors show that I can see.
Last edited by mrrhq (2012-11-13 18:34:29)

Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation. How to solve this?

Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation. How to solve this?

Hello FranBNYC
It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Thanks for using Apple Support Communities.
Regards,
-Norm G.

WHen I move my mouse, the entire view on my monitor moves too!

When I move my mouse to the left, my screen shifts to the right and vice versa. It seems like some type of option was selected to expand the viewing field - but I want to turn it off and don't know how. Please help/ THanks.

Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
Apparently this applies to Leopard too. Thanks alot!
Message was edited by: Linda Schodowsky

My MacBook Air shuts down when its more than half way charged and won't turn on unless I plug it in to the adapter? Why is this happening and how can I fix it?

My MacBook Air shuts down when its more than half way charged and won't turn on unless I plug it in to the adapter? Why is this happening and how can I fix it?

If you really do have a Mid 2013 Mac Air model then it is still in warranty, as the standard Apple warranty is one year from date of purchase. So take it into an Apple store and have it diagnosed and fixed under the warranty. There is some type of hardware problem that only Apple can fix.

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox!

HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

Great clue Lukas...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesturday but not now, any help

Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?

Hi,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

How do I get the Adobe PDF navigation bar to automatically appear at the top of my screen again instead of when I move my mouse?

Before I upgraded my computer to Windows 7 and updated Firefox to the latest version, when I opened a PDF document online, the PDF navigation/menu bar would automatically appear at the top of the screen. Now it only appears at the bottom in a blue bar when I move my mouse around.

cor-el, thanks for the tip. While I certainly scoured Adobe's preference settings to look for something relating to that exact thing, I never went to their help site until I got your post. I found out that the floating toolbar appears because the PDF opens in'' Read Mode'', which you can turn off for all future documents by doing this:
* Quit your internet browser
* Launch Acrobat (or Reader)
* Choose Edit>Preferences
* Click on the Internet category on the left
* Deselect “Display in Read Mode by default”
* Click the OK button.
* Relaunch Acrobat
Something important to note, if you have both Adobe Acrobat and Adobe Reader, you need to do the above in both programs (same steps).

I cannot block some advertisements in the journal De Telegraaf, in The Netherlands. When I move the mouse to blokkeren (Dutch) this blokkeren disappers. How to solve it?

Similar Messages

Maybe you are looking for