I cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac

i cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac's airport. My mac prints to this fine and the windows thinks it is printing but nothing. Please help with any suggestions.

install full feature driver from HP website...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Similar Messages

Officejet Pro 8500 A910 Not Printing & Heads won't clean.

I have an HP Officejet Pro 8500 A910. It has not been used for about 2 months until yesterday, but was left powered on. The Black, Yellow and Cyan carts were getting a bit low and my wife want to print a few dozen pages of black text. I had a HP 940 Black cart to hand so I replaced it. She printed about 2 dozen Word pages in draft format which uses less ink. They printed OK, but when she went to print more, the print got fainter with each page until they were coming out of the printer totally blank then when the cyan ran out the printer stopped printing blank pages all together. I installed new HP Cyan and Yellow carts, but the printer continued to spit out blank pages. I printed a Quality Diagnostic Page and it showed one column of blocks in Test Pattern 2 missing completely and some white streaks in at least one of the colored blocks. At this point the Ink cart levels were K=90, Y=90, M=50, C=90. The Print Head Health was KY=Good, MC=Good. At this point I ran an Alignment and the report showed all colors except Cyan which was completely missing. I had remembered from a few year ago, that this is one simple way to show if color heads were not printing. I then performed 3 successive level 1, 2 and 3 cleanings, and each time the cleaning report showed less color until only faint yellow showed on the printout. Also the alignment now only shows faint traces of yellow. I suspect the heads need to be either replaced or removed and cleaned manually. Any suggestions or advice would be greatly appreciated. Thanks very much in advance. Peter B.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with printing from your Officejet 8500A. I can help with that. This document outlines how to troubleshoot print quality issues with your printer. If that fails then this document will assist you with cleaning the printhead. If after following those documents then the printer itself is going to need to be replaced. You can contact HP support by clicking on this link. On the next page scroll to the bottom and fill out the form. When that is completed you will find some information on how to contact HP directly. If this resolves your issues then please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Officejet Pro 8500 A910 - when printing 3 pages, skips page 2.

Hi, I have looked on the online help, the printer itself and the print settings but cannot see how to get the printer to collate the pages correctly when printing double sided. At the moment 4 pages print correctly front and back on 2 pieces of paper, however when only 3 pages are needed it will print on page 1, then 3&4 double sided instead of page 1&2 Double sided and a single side on page 3.
Any help would be appreciated. We are an office of 5 people working on Mac OSX 10.7.5. Printer is:
Officejet Pro 8500 A910

Hey there Trubbs,
I have a few more steps in mind. Here they are in order I suggest them!
Mac OS X: How to reset the printing system
Repair disk permissions
Restart your Mac
Re-add the printer and test again
Hope that does the trick
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

NEW printer Officejet Pro 8500 A910 [9EDF91],NOT PRINTING in black !

NEW printer Officejet Pro 8500 A910 [9EDF91], initial prints had streaks, so I did print head clean, switch off, start again, and now it does NOT PRINT in black at all. I have tried everything. VERY FRUSTRATED, can't get in touch with HP assist. Any ideas what could be wrong?

I am having the same problem. I was able to print one thing in black (the fax report during printer setup) and now I can't print in black at all!
About to return the product if I can't figure out a solution....

HP OfficeJet Pro 8500 A910 - Unable to get it to copy, receive a fax, scan, or print

Dell Studio
Microsoft Vista .. 64
HP OfficeJet Pro 8500 A910
Up until a week ago, this printer was performing just fine. I am unable to get it to copy, receive a fax, scan, or print.
==============================
Unable to print.
Job in queue. printer screen says "now printing", However, nothing prints.
When I tried to reinstall the drivers, I got ... "Error 0X00000643"
Ran "EndError" scan and fixed any/all problems.
Still ... No Joy. Still .... Unable to print.
Tried printing a "Test Page".
Still No Joy !!
Screen on printer says "Now Printing"
However, nothing happens.
Does anyone have a suggestions?
Thanks In Advance,
EarlLJ

Same problem here. Already got it replaced with a refurb machine three times. Was fine for a while, then it started the same problem again. Any idea, before I toss it out of the window?

HP Officejet Pro 8500 A910 - all new ink cartridges, black and blue ink not printing?

HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
Cleaned printer heads w/no luck.

Welcome to the forums @corAtrum1 ,
I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
I hope this helps!
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer problems with Officejet Pro 8500 A910

Dear all,
I have been given as a present an Officejet Pro 8500 A910 (serie number CN16LDM020 and product number CM756A). The people whom I have got it from already had some problems with the printer heads. I have accepted the printer, because I want to have it working again. I do encounter some problems however. I hope you kind people on the forum can help me out and get this thing working again. As a side note: I am only interested in using the scanner, printer (only black and white - I do not print in colour) and e-printing (I understand that it is possible to email documents to printer, so that they are printed whilst you are somewhere else).
Upon installation I have conneted the internet to my wi-fi. Upon installation it made some test prints, whereby the black dots were good, but the cyan and other colours were not. When I now turn off the installed printer and switch it on again it takes the printer about 5 - 7 minutes to initialize. On the touch screen of the printer it is said "Checking printer, this might take 5 minutes", "Checking printheads", "Aligning printheads" and alike notifications. After 5 - 7 minutes the printer gives the following notification: " Failure notice. Alignment failed. Refer to device documentation for details." When I then push the question mark on the touch screen the following notidication is given: " Alignment failed. Check printer quality of the current print job. If it is not satisfactory, try aligning the printer to see if that improves the quality. To align the printhead again, touch (home), touch (arrow right), touch Tools, and then touch Align Printhead." When I follow these instructions, the same thing happens. I have tried the option "Clean printheads" under "Tools". The test prints that come out are again good in black and white and not good in colour.
The ink level of the cartridges is very low for Yellow, Magenta and Cyan. For Black the printer gives a question mark. The expiry date of the cartridges is in 2015. The information on the Self Test Diagnostic Page (you get when you print a report from checking the ink cartridges) gives the following status:
Printhead status
Printhead health: Good (for both Black/Yellow and Magenta/Cyan)
Serial: 7735960 (Black/Yellow) and 7744345 (Magenta/Cyan)
End of warranty: mid-2013
Accumulated ink usage (ml): Black 99/Yellow 71, Magenta 57/Cyan 58
Refilled supply:
Detected in printhead/printer? For all cartidges "yes".
When I try to print a document from Word on my MacBook (which runs on Mac OS X 10.6.8) and the printer is on stand-by, Word recognizes the printer, starts with the print order but then comes with the notifications "Printer offline" and "Cannot find printer" and postpones the print order. Today I reset the printer and the print job that I had before the reset (which was postponed) came out.
Today, I printed a document whilst the printer was not on stand-by (the touch screen was on home menu) and the print was well (it was only black and white). After the print, the printer also made a print report. Again, the colour was bad, but black ink was good. After that print report, the printer started aligning again. After 5 minutes it gave the above-mentioned failure notice (" Failure notice. Alignment failed. Refer to device documentation for details.").
I would assume that the first thing that I should do is get new cartridges. However, since I only print black and white, can't I just buy the Black Ink and disable the other cartridges? Then, I am thinking of not buying HP cartridges (since the warranty term is already over). What cartridges do you reccomend (price-quality)? If new cartridges are installed (previous owner had same problems with full cartridges) and the problems (with print heads) are not solved, what should I do?
On a second note, I want to use the option of printing online. In other words, give a print order on my Iphone to the printer so that it starts printing at home. How do I set this up? How can I test this?
I would be very obliged with your feedback on the above.
Kind regards,
Onno

Hey Onno,
I see you have several items listed about your Officejet Pro 8500a (A910 series) printer. The main issue that stands out is the print quality issue. I would advise starting here with your printer.
From your information I can see that refill or remanufacture cartridges have been used in this printer at some point. It is possible that the ink from these cartridges have damaged the internal ink system of the printer. If you have performed all the troubleshooting steps for the print quality issue you are experiencing, then the next step is going to be replacing the printheads of the unit.
Troubleshooting Print Quality Issues
The 8500a requires all cartridges be available even if you are simply printing in B&W. If the cartridges are low, then you will have to replace the cartridges as needed. Typically by the design of this printer, however, print quality issues do not follow ink levels in the cartridges as ink is piped to the internal printheads, thus even with empty cartridges there is some ink remaining in the system.
The printheads for the 8500a can be found at most HP certified retailers if you decide to attempt replacing them as a step towards resolving the issue. As to the cartridges, I would advise using genuine HP cartridges as HP ink is designed with HP printers in mind. For information about refilled/remanufactured cartridges please click here.
Hope this helps in getting the print quality issue alleviated,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

My HP Officejet Pro 8500 A910 will no longer print aqua.

My HP Officejet Pro 8500 A910 will no longer print aqua. I just tried two new cartridges and when I clean the heads, no aqua prints. I get no error messages however.
One possible issue: Recently I used a new HP aqua print cartridge (940XL version) that kept stalling my printer. If my printer sat without printing for 10 minutes or more, the only way I could get it to print would be to shut down the printer and restart it. Then, as long as I kept printing, it worked fine. When I replaced the problematic print cartridge the printer works fine except now it won't print aqua. Could the problematic cartridge damaged something?
I looked at the print head and it looks fine. What is strange is that NO AQUA INK at all shows on the print head page.
What should I do? Help!

Hey @CWickstrom ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I recommend calling HP Technical Phone Support for this issue I believe you will be given options and help I can't.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

HP Officejet Pro 8500 A910 softwre support

Hi,
Im having HP Officejet Pro 8500 A910. I am here to enquire whether the software can get a update or patches done ? or each specific printer comes with a specific software which cannot be updated
Thanking in advance
Anna

Hi Anna,
When you install the software of the printer on to your PC the HP Update software also gets installed (Provided you have not excluded that option). And if the HP Update software is installed then it will automatically check for updates and patched periodically and inform you if there are any updates or patches available.
Thanks.
I work for HP.

HP Officejet pro 8500 A910 won't print wirelessly

"An error has occurred. (devInfoPage-503)".
I've had my Officejet pro 8500 A910 for less than 6 months. It was an easy set up and printed and scanned perfectly for at least 2 months. I use a wireless connection from my laptop which is running Windows 7. Then a few months ago I started having problems scanning wirelessly from the printer pad, it would tell me that there was no computer connected. If I went to my laptop and went into the HP Document Manager it would scan the document and save it to my laptop just fine. And I could still print - the laptop had no problem finding the printer.
About a month ago I had a really big print job for work. But I figured this was a sturdy printer and could handle it. Towards the end though the printer would stop printing for no apparent reasoning with the keypad just showing the spooling circle and saying "printing". The only way to get it to actually print was to unplug the computer, delete the print job and start again.
Then for a while I had to do that every time I wanted to print, even after the "big print job" was long over, and still no scanning from the printer (will scan from the laptop).
I've tried several times uninstalling and reinstalling the software. I've checked to make sure the printer is included in the "home network".
Today I reinstalled the software at the Control Panel on my laptop I get the green checkmark meaning the printer is set up and ready to go, but when I try to print a self test page I get this message "An error has occurred. (devInfoPage-503)". Any help in solving this problem would be much appreciated. Thank you so much for your time.

My Office jet has printed fine wirelessly for 6 months but started to not recognise the computer. re starting worked for while but now it will not recognise the computer at all. The computer says Scanner communication cannot be established and the printer says it sees the computer.
Why did it work but now won't?
Thanks,
Billy

HP Officejet Pro 8500 A910 won't scan

I have a HP Officejet Pro 8500 A910 set up wireless. It prints from my computers fine. Makes copies fine. It won't scan. I get messages saying it is in useas a scanner or that it can't communicate with the scanner. Disabling firewalls doesn't solve problem.

Okay, I have found the solution to about 85% of your problems. Just throw it away (J/K). What I did was.......
Uninstall the entire HP Products from my PC. Then Reinstalled using the HP installation disc. Now here is the part that 8500 users need to do in order to scan documents to they're computer.
Click Start menu, Then click All Programs, Then click HP, Then click HP 8500 folder (in my case its HP Officejet pro 8500 A910) , Then click connect a new Printer, then select Network (Ethernet/Wireless), Follow the steps and installation steps (I know it seems like you've done this already when installing the software, but it's doing something different. TRUST ME) And Voila. No need to thank me, Im just saving alot of people out there some headaches. Now to let mines go. Whew

Fax from Win8 on HP Officejet Pro 8500 A910

I'm trying to fax files from my PC (with Win8) through my HP Officejet Pro 8500 A910 All -In -One.
The manual says to choose the fax option in "Print". No such option exists.
Does anyone know what Drivers or Software to install to get this to work? I can Scan , and print but not fax.
I downloaded and installed the latest drivers and firmware from the HP website but nothing new shows up in the print option.
Thanks,
K
This question was solved.
View Solution.

HI KentHP, I'm glad I was able to help!
I would recommend page 92 of the HP Officejet Pro 8500 (A909) All-in-One Series User Guide to find information on setting up fax re-dial.
Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Hp officejet pro 8500 a910 software will not open

I have had my printer installed for over 2 years on my laptop via the network (Dell with OS Win 8.1). Recently, as in I have no idea why or what happened, I have an issue where I cannot open the software on my computer to scan a document.
The icon on the desktop as well as under Programs > HP is "C:\Program Files\HP\HP Officejet Pro 8500 A910\Bin\HP Officejet Pro 8500 A910.exe" -Start UDCDevicePage
with a Start In of "C:\Program Files\HP\HP Officejet Pro 8500 A910\Bin\"
I suspected that the link was broken and opened the link in Windows Explorer and it would not open from there either. Also, the icon in Windows Explorer is nonspecific and does not look like an HP icon.
I tried uninstalling all HP software and reinstalling it, but am having the same issue. I cannot open the software.
Anyone have any ideas? Thank you!

Hi @SandraDee1961,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8500 a910 software will not open on Windows 8.1. I am sorry to hear this, but happy to help you with this issue!
I would recommend the following steps:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. How to Disable Antivirus in Windows 8?
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Reinstall the software using the HP Printer Install Wizard for Windows.
Hope this works!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Constant Printing Restart on a networked HP Officejet Pro 8500 A909N Series printer

Hello,
I'm curious if anyone has run into this problem before. I have a HP Officejet Pro 8500 A909n Series printer that I have setup as a network printer. This has been accomplished through a print server.
I installed the printer's drivers based upon the cd that came with the printer, in the box.
The problem is that whenever a user prints, say it's a simply one page document... the printer will repeatedly print that single page until it runs out of paper. I have stopped/restarted the print spooler. I've rebooted the printer and the print server. I have deleted the drivers and readded them. I've tried installing drivers from HP's website and then installing those. I have attempted to delete the printer from the server and start from scratch.
When I monitor the print queue, I can see the service restart after each document prints. I can't figure out how to get this to stop.
Does anyone have a suggestion; or has anyone run into this problem? I'm not sure which forum to put this in. I chose the Networks/Wireless forum, even though this is running on a wired network with wireless disabled.
I certainly appreciate any asistance.
-Craig

It ended up being an issue with the port. I had used the same port as the last HP printer that I replaced. This printer needs to run on a TCP/IP port, and not an HP port.
Problem solved.
Oh, and it was wired, with wireless disabled.

HP Officejet Pro 8500 a910 wireless connectivity issues?

I have a HP Officejet Pro 8500 a910 and It was working fine. I got a new router and it was still working fine. Second night of having everything set up it stops working and shows as offline on my computer. It will print information about the printer from thecomputor but will not print out any other documents.

I'm having the same issues. In my case, first I updated my MacBook Pro to OS X 10 Mavericks. A few days ago, the Actiontec gateway router provided by my ISP Frontier Communications ceased to function. Frontier sent a Netgear 7550 gateway router to replace it. I installed it according to directions. My email capability and home network went down. Frontier helped to restore the email but the techs I worked with couldn't figure out what to do to restore my wireless network. The router's setup would not allow me to replace the WPA Shared Key with the wireless network password I used previously. So, I updated the ASUS range extender and all the wireless devices that were on my home network with the new WPA key. Both printers, the Officejet Pro 8500A 910 and a Brother wireless laser, will not network. The Officejet blue wireless icon no longer lights up. I uninstalled the Officejet's software and then downloaded and installed the latest software and drivers for the Officejet Pro 8500A 910. The HP Network Configuration printout indicates that its network status is ready and the active connection type is wireless. I had it connected to my Mac with a USB cable so I could reinstall the software and drivers. When I disconnected the cable, I lost connection to the Officejet and couldn't print. the HP utility could not establish a wireless connection even though I did input all the new router settings. The Officejet thinks it's wireless but it isn't. I can only conclude that my Officjet is delusional. It's not all that old, but could it be ready for the all-in-one graveyard?

I cannot get my new hp officejet pro 8500 a910 to print through my vmware fusion over my imac

Similar Messages

Maybe you are looking for