I created a profile for a Tamron Sp AF 17-50mm f2.8 XR Di II VC - RAW mounted on a Canon EOS 450D

I am no pro and I'm not shure how good it is but you can get it here
http://rapidshare.com/files/404889540/Canon_EOS_450D_-_Tamron_Sp_AF_17-50mm_f2.8_XR_Di_II_ VC_-_RAW.lcp.html
hope it helps somebody

Thanks for sharing, it works fine!

Similar Messages

  • Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

    Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

    As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
    Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
    To answer your latest query, there are 2 type of cost centers.
    Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
    Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center.

  • Lens Profile For The Tamron Lens

    Does anyone have a profile for the tamron 28-105 3.5-4.5 usm
    on the canon 5d markll

    What lens are you looking for?  I don’t think there is a 27-40mm.  Do you mean a 24-70 or 17-40?   And what are the rest of the lens model specifications:  max aperture, stabilization, optical quality, etc.

  • Create Pricing Profile for Generic Articles

    Hi
    How to create pricing profile for generic articles, this need to be assign in article master basic data view.
    also is it possible to give price for generic article using sales price calculation (VKP1 and VKP5)
    regards
    satish

    satish c wrote:>
    > Hi
    >
    > How to create pricing profile for generic articles, this need to be assign in article master basic data view.
    Pricing Profile can not be created, It is default in SAP...this can be assigned in Basic view of Article master data
    This profile is useful for fixing price for variant article...three way you can define variant price
    If you select
                    0. Variants will have different price
         1. Variants can maintain different price
         2. Variants have same price as Generic material
    > also is it possible to give price for generic article using sales price calculation (VKP1 and VKP5)
    It is same like single article...you can maintain price in VKP1, VKP5
    Regards
    Vijai Jain

  • Colorsync - how do I create a profile for HP printer

    Help. I have a new printer (HP Photosmart C4750), and it's profile doesn't at all match my onscreen colors. I need to create a colorsync profile that will address this, but am having NO success with the information I'm finding. Anyone?

    Your best bet (cheapest) is to look on HP's site and see if they have profiles for that model printer. You may also find them on the disks the printer came with.
    Be aware that printer profiles are very specific. The exact same model of printer must be used when creating one, and the exact same paper. When you're done, that profile is only good for the paper used as glossy paper will give you completely different results than plain paper. It's also brand specific. If you used HP glossy paper, you can't substitute Epson glossy paper, or even a different type of HP glossy paper. Color will come out different.
    So if HP does have any profiles you can get for your printer, they should also be noted as to what paper they are for.
    Next least expensive is to have an outside service create your profiles for you. They would send you target images to print, which need to be printed in a very specific manner. You then send the printed sheets to them and they create a profile from them to be emailed to you upon payment.
    Here's one place which can do that. You can find a few more by looking through these links.
    After that, you need to shell out some bucks. Least expensive is an X-Rite ColorMunki at about $320 at various online stores. I've tried them, and while they work, they don't produce very good printer profiles. What I use is Monaco (X-Rite) Profiler with a DTP-70 auto reading spectrophotometer. However, this type of setup will set you back about $4,500.

  • Hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    hi cannot import RAW photos from my canon eos 5d mark 3 to iphoto 9.6 with iOS  X Yosemite. Fotos are black. Did you have a solution for that?

    Thanks. Once ImageCapture had accessed the photos, THEN iPhoto began to pick up the data, so I was ultimately able to do both. It only worked with the cable, though, not the card readers. Weird.
    And I really appreciate the ImageCapture tip. Any idea why it worked?

  • Create Action Profile for Service Complaint

    Hi All,
    How to create the action profile for service complaint. I am working in CRM Standalone server. I gone through that service complaint doc and found that for this transaction we have to define the actions like CREATE RETURN REQUEST, CREATE SPARE PART DELIVERY, CREATE QUALITY NOTIFICATION, CREATE CREDIT/DEBIT MEMO REQUEST AND CREATE TASK. Can Anybody guide me how can I achieve this ans assign to my transaction type ie Service Complaint.If any body has the doc to achieve this can send it to
    [email protected]
    Valuable answer will be appreciated.
    Thanx
    Saravana

    Hi saravana
    want actions in transactions then use this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c87bb93d-0b01-0010-a0b4-b04d7fda745f
    regards
    Vinay

  • Create lens profile for ultra wide angle lens

    Hello,
    I am trying to create a lens profile for the ultra wide angle lens Olympus 9-18 mm (Crop factor 2). As i use the lens for timelapse, i only need the profiles for 9 mm and open aperture f4, but combined with several different ND-filters which show different vignetting depending on their filter strength. Filters are oversized, so no influence by fringe. What i need is to get rid of vignetting.
    So far everything works out well, and probably good enough for still photography. However for timelapse I need a high quality compensation of vignetting, otherwise getting flicker.
    My problem is, that with the ultra wide angle lens distance from camera to chart (A3) is just about 0.5 meters.  I did the shootings outside, in shade, when having a clear sky, and I found it quite impossible not to produce any shadow of myself or the camera on the chart. Thus I got a not perfectly even correction of vignetting.
    Can anyone give me tips how to solve that problem with producing shade on the cart? Maybe working indoors with 2 lamps can create better results? Have tried that but found the illumination of the chart so damn poor.

    I think your best bet is outside, with possibly a larger chart.  (The two-light setup indoors is problematic esp. with wide-angle lenses.)
    Instead of waiting for overcast, try waiting for a sunny clear day with a direct lighting from the sun on the chart, at a sharp angle (almost side-lit) so that the chart is clearly illuminated, but the shadow that the camera casts will be to the side (instead of on the chart itself).

  • Create searchable profiles for my client's website.

    I am a web designer and have been asked to create an option for my client's customers to create profiles that are searchable by others (specifically athletes that can be searched for by college coaches). I am a little out of my depth since I mainly work in design and have limited experience in developing things like these. Any help at all would be greatly appreciated

    Have you ever worked with WordPress?   There are  WP plugins (commercial and free) that might do what you need.
    WordPress › Profile Builder - front-end user registration, login and edit profile « WordPress Plugins
    http://www.cozmoslabs.com/wordpress-profile-builder/
    Nancy O.

  • Design and Web Premium creates huge profile for each network user.

    Just wondering how I can get around the Adobe Design and Web Premium creating a huge profile for each network user. When a new user logs in on the network a 6 GB Adobe Design and Web Premium folder is created in their profile. With dozens of students logging into each machine that equals dozens of 6GB folders.
    Windows 7 environment.

    Moved to Creative Suite Enterprise Deployment.

  • HT201304 How do i create a profile for my iPad. so i can have a profile and my children can have their own profile?

    I need help with reating profiles on my ipad. Can someone please tell me how you creat profiles. I would like one profile for adults and one for chidlren.

    You can't create different profiles or user accounts on the iPad. It was not designed that way. It was designed as a single user device - no matter what you see in the TV commercials.
    You can use passcode lock the iPad, you can set up restrictions in order to prevent purchasing of apps, prevent changing mail accounts, dsiable using FaceTime, using Safari and you can age restrict some content as well in the restrictions.

  • Jdev hangs while trying to create deployment profile for EJB from ADF BC.

    Hi,
    I created some ADF BC and try to create the deplyment profile as EJB session Beans
    however it is not saving and while trying to deploy it to satandalone OCJ I got some errors
    atht classes EJB are missing.
    Please advise.
    Thanks
    JO

    Hello JO,
    Is the version of your stand alone OC4J compatibile with JDeveloper you are using?
    e.g.: JDev 10.1.3 is certified with OC4J 10.1.3
    Did you install the ADF runtime ?
    e.g.: from the menu, Tools -> ADF runtime installer -> stand alone OC4J
    What is the exact error which is displayed ?
    Stephan

  • I created a profile for visual studio but it no more shows

    ashwanishukla.visualstudio.com
    The above screenshot shows my registration
    but when i click on the link above it shows below screen asking me to register again and now shows my id as "in use" when i try to register again with the same

    If you want to add Images to Favicons on your Bookmarks, do the following:
    -> Create file '''userChrome.css''' in a folder named '''chrome''' in your Firefox Profile Folder
    * http://kb.mozillazine.org/UserChrome.css
    * http://kb.mozillazine.org/Profile_folder
    -> Close Firefox
    -> Now you will need to add some code in the userChrome.css file.
    * see the last reply by '''dfoulkes''' in the following Thread:
    * http://forums.mozillazine.org/viewtopic.php?f=38&t=2197793
    Check and tell if its working.

  • Can I create multiple profiles for my iPad?

    So that each user can have a personalized experience.
    http://afsawaf.blogspot.com/2013/04/feature-i-would-like-to-see-in-ipad.html

    The iPad is basically a single user device, you can only have one set of apps and content on it, it doesn't have the concept of user profiles/logons like you can have on a computer

  • How can I launch firefox on different displays simultaneously without creating profiles for each of them

    On my solaris server, there is an application which, in order to display some information, opens the browser. The server can be accessed thorugh X windows by various users. The issue is that whn firefox is open on one display, it fails to open on another display.
    The resolution for this problem as suggested by a lot of users on various forums is to create different profiles for various firefox instances. However, everytime my application will launch firefox, i will have to invoke it with -P option which will pop up the profile manager. I do not wish to show the pop up for creating profiles:(. Is there some way to allow multilple instances of firefox to run on different displays?

    when you lock the preferences with the mozilla.cfg file in the firefox program folder as it's described in the mozillazine kb article above, it should apply for all users...

Maybe you are looking for