I created an Execute SQL Task in ssis package to get the counts and store it in the variable and I use the variable in the control flow

I always get the count as 0 for the variable. I am not sure what I am doing wrong. Please let me know if any of you know the fix.
Thanks

Here is the query I used now. Still same result
SELECT (select count(*) from usr_all_mbrs where PREMIER_YN = 'Y') AS count1
SELECT
(select
count(*)
from usr_all_mbrs
where PREMIER_YN
=
'Y')
AS count1

Similar Messages

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

Customized Execute SQL Task in SSIS

Hi,
I,m using Execute SQL Task in SSIS Package with these configuration ..
But, If SQL Statement doesn't report any record mean Query is not returning any data then this Task will be failed.
How can I assure that If there is no record is returning in query that " Execute SQL Task " should bot be executed .
Also I If I can do the same thing through other methods in SSIS, Pls response .
-Ashish

Hi Ashish,
The Execute SQL Task failed because you had set the ResultSet to “Single row”, however, the SQLStatement didn’t return any records. If you don’t want to execute this task when the query doesn’t return any records, you can use the following method:
Create a String type variable RowCnt, add another Execute SQL Task prior to this task.
In the new Execute SQL Task, input the SQLStatement as “Select Count(*) From Table”, set the ResultSet to “Single row”, and map the result set 0 to the variable RowCnt.
Join the two tasks (green line), and edit the Precedence Constraint (Green line), and set the expression to “(DT_I4)@[User::RowCnt]>0”.
Regards,
Mike Yin
TechNet Community Support

Multiple Select statements in EXECUTE SQL TASK in SSIS

Can we write multiple select statements in execute sql task(SSIS).
If possible how to assign them to variables in result statement

Hi ,
You can use below steps to set result set to variable.
1.In the Execute SQL Task Editor dialog box, on the General page, select the Single row, Full result set, or XML result set type(According to your result set).
2.Click Result Set.
3.To add a result set mapping, click Add.
4.From the Variables Name list, select a variable or create a new variable.
What is multiple selection ? May be below can be used in your scenario !
http://stackoverflow.com/questions/17698908/how-to-set-multiple-ssis-variables-in-sql-task
What you want to achieve ?
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty

So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRP

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

HELP: SSIS 2012 - Execute SQL Task with resultset to populate user variables produces DBNull error

I am experiencing an unexplainable behavior with the Execute SQL Task control in SSIS 2012. The following is a description of how to simulate
the issue I will attempt to describe:
1. Create a package and add two variables User::varTest1 and User::varTest2 both of String type with default value of "Select GetDate()"
for each, have shown this to not matter as the same behavior occurs when using a fixed string value or empty string value.
2. Add a new Execute SQL Task to the control flow.
3. Configure an OLE DB connection.
4. Set SQLSourceType = "Direct Input"
5. Set the ResultSet property of the task to "Single Row"
6. In the ResultSet tab add two results as follows:
Result Name: returnvalue1, Variable Name: User::varTest1
Result Name: returnvalue2, Variable Name: User::varTest2
7. Set an expression for the SqlStatementSource property with a string value of "Select 'Test' returnvalue1, 'Testing' returnvalue2'"
The idea is that the source would be dynamically set in order to run a t-sql statement which would have dynamic values for database name
or object that would be created at runtime and then executed to set the user variable values from its resultset. Instead what occurs is that a DBNull error occurs.
I am not sure if anyone else has experienced this behavior performing similiar actions with the Execute SQL Task or not. Any help would be
appreciated. The exact message is as follows:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "varRestoreScript": "The type of the value
(DBNull) being assigned to variable "User::varRestoreScript" differs from the current variable type (String). Variables may not change type during execution. Variable types are strict, except for variables of type Object.
User::varRestoreScript is the first return value. And even with the a dummy select the same result occurs. I have narrowed the issue down
to the T-SQL Statement structure itself.
The following works just fine within the execute sql task control as long as no resultset is configured for return:
"Declare @dynamicSQL nvarchar(max)
Select @dynamicSQL = name
From sys.databases
Where name = 'master'
Select atest_var1=@dynamicSQL, atest_var2='static'"
I have tried various iterations of the script above with no success. However, if I use the following derivative of it the task completes
successfully and variables are set as expected. This will not work for my scenario however as I need to dynamically build a string spanning multiple resultsets to build one of the variable values.
"Select atest_var1=name, atest_var2='static'
From sys.databases
Where name = 'master'
I have a sample package which can reproduce this issue using the above code. You can get to that through the post on www.sqlservercentral.com/Forums/Topic1582670-364-1.aspx
Scott

Arthur, the query when executed doesn't return a null value for the @dynamicSQL variable. It returns "master" as a string value. Even the following fails which implements that suggestion:
Declare @dynamicSQL as nvarchar(max)
Select @dynamicSQL = name
From master.sys.databases
Where name = 'master' -- (or any other DB name)
I believe I have found the cause of the issue. It is datatype and size related. The above script will properly set the variables in the resultset as long as you don't use nvarchar(max) or varchar(max). This makes the maximum data size for
a String variable 4000 characters whether unicode or non-unicode typed.

Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task

I executed a simple query inside an execute SQL task -
SELECT col1, col2
from thetable
where code = ?
order by id asc
Exec sql task - ADO.NET connection
parameter "code" is an int32 in SSIS and int32 in parameter mapping of exec sql task.
It works fine in SQL server, but in SSIS it causes the error -
[Execute SQL Task] Error: Executing the query "SELECT col1, col2
from thet..." failed with the following error: "Failed to create an IDataAdapter object. This provider may not be fully supported with the Execute SQL Task. Error message 'Incorrect syntax near '?'.'.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
How do I fix this error ?

Thanks. I think it was sqlclient. I changed it to OLEDB to avoid that issue. Btw, what is this "provider" ?
Hi blastoSO,
To check which provider is used by the current ADO.NET Connection Manager, you can open the “Configure ADO.NET Connection Manager” window, and check the “Managed Provider” option of each Data connection.
In an Execute SQL Task, if the managed provider is “System.Data.SqlClient”, we should use the rule for the ADO.NET connection type in the following table. If the managed provider is “System.Data.Oledb” or “System.Data.Odbc”, it actually uses the OLE DB provider
or ODBC provider, so we should use the rule for the OLE DB or OBC rule in the following table:
Reference:
http://technet.microsoft.com/en-us/library/cc280502.aspx
Regards,
Mike Yin
TechNet Community Support

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

SSIS: How to use one Variable as Input and Output Parameter in an Execute SQL Task

Hello,
i need your help,I'm working on this issue since yesterday and have no idea how to deal with it.
As I already said in the tilte i want to start a stored procedure via a Execute SQL Task which has around 15 prameters. 10 of these should be used as input AND output value.
As an example:
i have three Variable:
var1    int        2
var2    int     100
var3    int     200
the stroed procedure:
   sp_test
     @var1 int
      @var2 int output
      @var3 int output
   AS
   BEGIN
        SET @var2 = @var2 * @var1
        SET @var3 = @var3 + @var1
   END
So in the Execute SQL Task i call the Stored Procedure as follwos:
    Exec sp_test  @var1 = ?, @var2 = ? output, @var3 = ? output
(I use an OLE DB Connection)
The parameter mapping is as follows:
User::Var1        input                   numeric              0                 -1
User::Var2        input/output         numeric              1                 -1
User::Var3        input/output         numeric              2                 -1
Now my problem. If i set  Var2 and Var3 as Input parameter the values are still the same after running the package. If i set them to a output value the are both Null because the procedure doesnt get any values.
I already tried to list them a second time - like
    User::Var2        input                  numeric              1                 -1
    User::Var2        output                 numeric              1                 -1
or i use a new variable
    User::Var2                  input                  numeric              1                 -1
    User::Var2Return        output                 numeric              1                 -1
but i alwas get the error
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Has anybody an idea how I can solve this problem?
Thanks a lot.
Kind Regards,
Alice

Hi Alain,
thx for your answer.
I have around 15 procedures called one after the other to calculated and modify my values. Each procedure is responsible for an other but overlapping set of variables. So i thought it would be a good idea to call them one after the other with the needed variables via a execute sql task.
So if i use a result set, how i get my stored procedure to return 10 values? I would have to use a Function instead of a procedure, wouldn't i?
As if i have 15 procedures this would be a lot of work.
But thanks a lot for the idea. I think an other idea would be to create one function which calls all stored procedures and returns all the calculated values as a result set, wouldn't it?.
Kind Regards.
Alice

SSIS Execute SQL Task using sp_rename giving deadlock issues

All,
We have a job that has 2 steps and both of those steps call an SSIS package
1st package - Loads the data from a SQL server source, to a SQL Server destination tables, say, "TblHistory" is one of them
2nd package - It does a re-name from the History table to the Main table, so below, is how the code looks like in the execute SQL Task:
BEGIN TRANSACTION
EXECUTE sp_rename 'dbo.Tbl', 'TblOld'
EXECUTE sp_rename N'dbo.TblOld.PK_TblId', N'PK_TblIdOld', N'INDEX'
EXECUTE sp_rename 'dbo.TblHistory', 'Tbl'
EXECUTE sp_rename N'dbo.Tbl.PK_TblHistoryId', N'PK_TblId', N'INDEX'
EXECUTE sp_rename 'dbo.TblOld', 'TblHistory'
EXECUTE sp_rename N'dbo.TblHistory.PK_TblIdOld', N'PK_TblHistoryId', N'INDEX'
COMMIT TRANSACTION
In package 1 there are multiple history tables that are being loaded and most of them get renamed in the 2nd package. There is a separate SQL task for each of the history tables. The problem that I am running in to are the deadlock issues. When the 2nd package
runs, it throws this error:
"SQL - Table Rename & Swap for "Tbl" Execute SQL Task Description: Executing the query "BEGIN TRANSACTION EXECUTE sp_rename Tbl..." failed with the following error: "Transaction
(Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim."
It's giving me a deadlock issue on the other tasks as well. So, when the job ran today, I am noticing 4 deadlock errors on the 4 different execute SQL tasks in the 2nd package (i.e. the job fails at 2nd step)
Has anyone faced this scenario before?

Why renaming tables? The data do not change. So just load the data to an interim table and push it to the target or may be you do not need it at all - just load the right table.
I admit I fail to capture the overall picture of what you are trying to solve or deliver. But renaming tables is something not usual.
Arthur My Blog

SSIS - Using Variables in Execute SQL Task Error

The following query in my Execute SQL Task throws the following error when run - [Execute SQL Task] Error: Executing the query "SELECT @columnz = COALESCE(@columnz + ',[' + times..." failed with the following error:
"Must declare the scalar variable "@columnz".". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Query:
drop table tmpNCPCNCDownstreamMaxUtilization3wks
select node, max(utilization) as max_Utilization, DATE
into tmpNCPCNCDownstreamMaxUtilization3wks
from stage_ncpcncdownstream_temporal
WHERE Date BETWEEN DATEADD(day, -20, GETDATE()) AND GETDATE()
group by node, date
order by node
go
alter table tmpNCPCNCDownstreamMaxUtilization3wks add Timestamp varchar(50)
go
update tmpNCPCNCDownstreamMaxUtilization3wks
set Timestamp = 'WeekOf_' + cast(left(Date, 11) as varchar)
go
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
declare @columnz varchar (8000)
go
SELECT @columnz = COALESCE(@columnz + ',[' + timestamp + ']','[' + timestamp+ ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks group by timestamp order by timestamp
go
--pivot contents in @columns
declare @query varchar(8000)
SET @query ='select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in('+ @columnz +')
)as p'
execute (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
update tmpNCPCNCDownstreamMaxUtilization3wks
set timestamp =''
truncate table tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
insert into tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
(Node, TwoWeeksAgo, PreviousWeek, CurrentWeek)
select * from tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
update tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
set average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0))/3
from tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
Scott

Issue is with variable @columnz.
Scope of variables is only limited to the batch and if batch is over Variable is no more accessible.
Reproduce Steps:
DECLARE @columnz int = 0
Go --Scope of @columnz ends here
SELECT @columnz -- Ends up with error
So you have to remove GO keyword. I have commented 2 of them in below:
DROP TABLE tmpNCPCNCDownstreamMaxUtilization3wks
SELECT node
,max(utilization) AS max_Utilization
,DATE
INTO tmpNCPCNCDownstreamMaxUtilization3wks
FROM stage_ncpcncdownstream_temporal
WHERE DATE BETWEEN DATEADD(day, - 20, GETDATE())
AND GETDATE()
GROUP BY node
,DATE
ORDER BY node
GO
ALTER TABLE tmpNCPCNCDownstreamMaxUtilization3wks ADD TIMESTAMP VARCHAR(50)
GO
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = 'WeekOf_' + cast(left(DATE, 11) AS VARCHAR)
GO
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
DECLARE @columnz VARCHAR(8000)
--GO
SELECT @columnz = COALESCE(@columnz + ',[' + TIMESTAMP + ']', '[' + TIMESTAMP + ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks
GROUP BY TIMESTAMP
ORDER BY TIMESTAMP
--GO
--pivot contents in @columns
DECLARE @query VARCHAR(8000)
SET @query = 'select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in(' + @columnz + ')
)as p'
EXECUTE (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = ''
TRUNCATE TABLE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
INSERT INTO tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week (
Node
,TwoWeeksAgo
,PreviousWeek
,CurrentWeek
SELECT *
FROM tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
UPDATE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
SET average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0)) / 3
FROM tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
-Vaibhav Chaudhari

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

Combining package configuration and Execute SQL task at run time

Hi everyone,
I have an issue regarding setting values at run time
I use package configuration to manage different enviroments scenarios (DEV, PROD):
XML file to store the connections string of SSISConfigDB
and the actual values of parameters in that SSISConfig DB tables Filtered by ConfigurationFilter column
Now, one of my packages needs in addition setting at run time value of a flat file name
i used an Execute SQL task - within the task i read into a variable the file name using command line
then, the full path of Flat File Connection is set by expression concatenating the root folder and the variable
the problem is that the variable stays empy! as if the Execute SQL task was never executed!
Am i doing something incorrect? in the package configuration wizard the configured value are only XML file and the connection string of the DB.
to summerize - how can i combine package configuration, default value, Execute SQL task and expression at runtime?

1.EvaluateasExpression=TRUE (Full Path variable)
2. Do you mean to invlole a ISNULL() function in the expression? if so, no
3. Of course i recieve a valid value
4. The Full path expression is evaluated to the root folder - without the portion of the file name
here is the syntax in Execute SQL Task:
truncate table OnErrorFlagTable
Declare @Path varchar(128)
Declare @FileName varchar(128)
Declare @SenderID varchar(5)
Declare @INST_COD varchar(5)
Declare @Flag int = 0
Declare @FileType varchar(2)='01'
Truncate table TraumaRecords
Select @Path = 'C:\RootFolder\'
--***Insert into Temp table the file so we can take his name***--
Create Table #Tmp(Txt Varchar(Max))
Insert Into #Tmp(Txt)
Exec master..xp_cmdshell 'Dir *.txt C:\RootFolder\/b'
select top 1 @Filename = Txt From #Tmp
Where ISNUMERIC(substring(Txt,1,1))=1
order by Txt desc
Insert into OnErrorFlagTable
Select 2,@FileName
Select @FileName as TraumaFileName,@FileType as FileType
Then, in ResultSet TraumaFileName and FileType are mapped
Expression of @TraumaFlatfileFullPath is
@[User::TraumaFlatfilePath]+ @[User::TraumaFlatFileName]
where the variable @[User::TraumaFlatfilePath] is evaluated in variable window (default value)
and it's value is C:\RootFolder\
and @[User::TraumaFlatFileName] is the ResultSet of the ExecuteSQLTask
and for some reason when executed in SSIS return null while in SSMS return the expected value
Can you try making this into a procedure with required parameters and call it from SQL task to see if you get return value correctly? Use OUTPUT parameters for getting back required values
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SQL Server 2008 Execute SQL Task parameter problem

hi, guys
i create a very simply package which only Execute SQL task, set the properties as:
the testing table structure:
create table t(
idx int,
cname varchar(60)
Execute SQL Task setting:
[genaral]
ResultSet: None
ConnectionType: Ado.net
connection:LocalHost.APR11.sa1
SQLsourceType:Direct input
SQLStatement:delete from t where idx=?
[parameter mapping]
variable name: user::idx
direction: input
data type: Int32
parameter name:NewParameterName
parameter size:-1
i hardcode the idx=1, but get error:
SSIS package "test.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "delete from t where idx=?" failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
SSIS package "test.dtsx" finished: Success.
help me please.
Regards.

Hello,
Here you go
http://decipherinfosys.wordpress.com/2008/03/26/running-parameterized-sql-commands-using-the-execute-sql-task-i/
http://technet.microsoft.com/en-us/library/ms140355.aspx
if you use ADO.NET then the way Execute SQL task take parameter is different then "?".... you have to use @paramter.. Please check the above link
Thanks
http://sqlage.blogspot.com/

I created an Execute SQL Task in ssis package to get the counts and store it in the variable and I use the variable in the control flow

Similar Messages

Maybe you are looking for