I erased everything on my internal HD and ONLY have disk utilities,terminal, and install OS X MAVERICKS but wont install because no recovery system can be created
Help me,ANYONE!
I was a fool thinking downloading OS X MAVERICKS offline would be easy if I cleared my WHOLE HD, WELL the past 2 days ive been trying to figure it out in disk utilities and in terminal to run os x mavericks installer but nothing will work, it also says OS X cant be installed because a recovery system cant be crested.... plzz... someone help.. idk, ive been pretty **** emotional about this and about to throw laptop out the window..
Macbook pro
Specs are mid 2010 15" screen.
This might depend on how you made your installer. If it is a flash pen installer that you made yourself, depending on how you made it, it has consequences on what is installed.
I am assuming that you have made an installer?
If you have and you did it manually, without using the Terminal command then it is a know caveat that a recovery partition is not installed as part of that procedure. The second method to create a bootable installer, using Terminal, will allow and install a recovery partition.
See here (without Terminal): http://www.macworld.com/article/2151706/create-a-bootable-mavericks-install-driv e-for-newer-macs.html
& here (with Terminal): http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
Alternatively, have you zapped the PRAM and SMC, prior to trying to install?
See here: About NVRAM and PRAM
Some of these might help or even answer your query...
Good luck.
Similar Messages
-
OS X Lion begins installing and then error message comes up that it can't be installed on MacIntosh HD because a recovery system can't be created. What do I do to fix this problem?
What to do if the installer warns that no Recovery HD can be created
Some disk partition configurations may result in the OS X Lion installer reporting that it could not create a Recovery HD. In these situations, even if you are permitted to continue the install, you should quit the install and create an external, bootable OS X Lion hard drive with a Recovery HD, first. You will be able to return to the upgrade to OS X Lion on your computer's boot drive after creating the external Recovery HD.
Important notes
Your storage device must have at least 13 GB available (after formatting) to install Lion and an Internet Restore partition.
These steps will erase and reformat the storage device. OS X Lion: About Lion Recovery will instruct you on setting up the storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install Lion and an Internet Restore partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure will install a version of the OS X Lion that is compatible with the Mac it was created with. Using this Lion system with a different kind of Mac may produce unpredictable results.
Your computer's serial number will be sent to Apple to help authenticate your request to download and install OS X Lion. -
Hello! I had Photoshop Elements (and some other products) installed on my Laptob, but lost them because of a system breakdown. Trying to install these programms again, I logged in to my account "my adobe" and immediately found my products listed there plus a link "download here". But clicking the link didn´t start anything. Nothing happened. How can I get my prgramms installed again?
Try using a different browser if the link did not work.
You can also try downloading thru the following page if you can find the version(s) you need...
Download and Installation Help -
https://helpx.adobe.com/download-install.html -
Unable to install OS X Lion as "...it can't be installed on Disk Mackintosh HD because recovery system can't be created. Visit www.apple......"
Visiting the web pages does not help me can someone please point me in the right direction ?OK. You have a Boot Camp partition which is why the issue. See the following:
It seems the issue is that the space at the "bottom" of your available space when Lion installs it's partition is already occupied by BootCamp. The fix was to go into Disk Utility; Select your Hard Drive; Select Partition; Move the bottom of your main partition "up" a bit to create a space for Lion; close Disk Utility; Install Lion; once Lion is successfully installed, go back into Disk Partition and drag the bottom of your main partition back "down" to the bottom of the window.
In your case use Disk Utility to "shrink" your OS X partition a little more than 1 GB.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired empty space. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.
Remember that you only need to shrink the OS X partition a little more than 1 GB. Now, when you try the Mountain Lion installation the installer will be able to make the Recovery HD. -
I have tried many times today to install iTunes 10.5 in order to update to iOS5 on my Iphone 4 however it just wont work. I have a MacBook Pro and when I use the software update it says that I have already downloaded iTunes 10.5 but when I go to install it and it says it is writing the files and the bluw bar is working its way across the page and then becomes very very slow and and at the last millimetre it seems to just hang there and do nothing. I even left if like this for several hours and nothing progressed. I have since tried to update via the iTunes program and the same problem happens. Any and all help would be greatly appreciated.
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
how do i revert back to older version of itunes 10.7 because I hate 11.i have unistalled all apple and itunes related software but 10.7 wont open.I is held up because the itunes library .itl was created by a newer version how do i delete this without itunes 11 installed ? Windows 7 64bit.
Thanks, just had the same problem. Not very computer savvy, but I could actually understand your instructions. Worked perfectly! Thanks again!
-
I own a pawn shop and I have a number of apple products but some are firm ware locked and iCloud locked. These item are now my property. And I need help in order to prepared them for resale?
Read this first
it will explain Activation lock
http://support.apple.com/kb/HT5818
The only way to unlock them is to have the original owner to release them ,as explained in the above document
The iPhones may have been stolen or the donors intended you to be left with a brick
There is no solution .Apple will NOT unlock them ,it is an anti theft device and since it was introduced with iOS 7 from the posts here it will be very successful at making stolen iPhones useless -
My Macbook Pro is set up to run Windows via bootcamp and I am trying to install Mountain Lion.
I cant install and has come up with an error message telling me Install Failed because it cant create a recovery system. I am not very technical and can just about spell 'Mac' so I need help
ThanksInstaller reports "This disk cannot be used to start up your computer"
-
My grandkids put a passcode on my ipad while playing games. I have tried everything posted but it still does not respond. What can I do?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
All other Apple programs the same way. Also my library is gone??? I downloaded a fresh copy and tried installing that as an adminisrator still wouldn't let me.
Any suggestions?Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.
I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.
-
iPod will not play any music. Seems like it is in “Pause” mode. No sound from either the head phones or internal speaker. I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.
Try restoring from backup. Next would be a restore to factory defaults/new iPod.
-
I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?
O also installed lion before and as i had filevault activated y lost my user information in timemachine. So, i have a useless backup. I only have events in iPhone ( due i didnt sync photos) and in MobileMe gallery, and i already migrate to iCloud. So?
-
Declare the internal table with only one 10 character field and use
Hi,
I want to declare the internal table with only one 10 character field and use.
JayaHi,
Go ahead. U can declare IT with only one field
Example:
data: begin of zcustlist occurs 1000,
custmer(10) type c,
end of zcustlist.
Narendra Reddy.
Edited by: Narendra Reddy C on Aug 8, 2008 11:39 AM
Maybe you are looking for
-
To create a customer invoice from vendor invoice
Hi i have a requirement to create customer invoices from vendor invoice. i would like to know if it is feasible?? if it is possible is there any bapi or function module to transfer data from the vendor invoices to the customer invoice. regards prasan
-
https://mobilepanel2.nielsen.com/nenroll/rewards.do?l=en_in&pid=1 i have got mail to this link stating Nokia and neilsens site...is it true frnds? or just spam?
-
Resizing an image with changes in quality factor
Hello I have a requirement where in a image uploaded by the System has to create 2 new images of different sizes and changing the quality factor. The System is a web based interface with jsp as the presentation layer and application server as the mid
-
I have installed Firefox 5 but I don't want it - how do I re-install Firefox 4?
All I want is to use the previous version of Firefox. I need access to the Google toolbar, which does not work with Firefox 5
-
InCopy CS5 doesn't Launch kern_protection_failure
Despite reinstalls, reboots, adobe clean scripts, rapid release updates... InCopy won't launch. And Ext. Mgr launches, but into an unusable state. The rest of the CS5 suite runs fine, but on quitting those apps, they "crash". ANy ideas? Many Thanks,