I get resolution warnings when I know the resolution and image size exceed

I am using images that exceed the required resolution (300 dpi) for the size used (8 1/2" x 11"). Mostly these are on full page images. anyone run into these problems?

Error -36 is I/O error, w/o specifying if the error is in the source or the target.
So, first of all, verify your disk(s) with Disk Utility, just to make sure there's no problem there.
If there isn't, then there's a problem with the download. Consult "EVE online" (whatever that might be) tech support and user forums.

Similar Messages

  • Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

    Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

    The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
    5 x 200 = 1000 pixels
    7 x 200 = 1400 pixels
    So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
    I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

  • C#: 'Not a Valid File Name' error when I know the name and link are correct.

    I'm receiving "Not a valid file name" when I know I have used this link before and the filename is spelled correctly. I'm not sure if I should be looking at something else. This is my connection code.  It fails on "conn.Open()".
    For security reasons, I edited the link... it is not a working link for this question.
    private void InitializeDBConnection()
    strConn = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=http://database.storage.net/App_Data/Tracking.mdb";
    MessageBox.Show(strConn);
    MyConn = new OleDbConnection(strConn);
    MyConn.Open();
    SV

    A database must be locally available via the filesystem, e.g. an UNC path would do it also.

  • Very confused about ppi, resolution, and image size...

    I have read so much on these things and even posted along these lines here and there, but remain totally confused.
    Say the size of my pictures is around 2000 x 3000. Once I download them to PSE, the resolution is 72ppi. Is this default and could I/should I change this?
    I generally do four things with my pictures.
    First I edit them.
    Next I email to family members.
    Then I order prints (99% are 5x7 or smaller)
    Finally I store them (on computer with CD backup).
    Now, space is a bigger concern than quality since I print small prints generally. So what would be my best options for saving my files, but getting very nice prints?
    Right now, once I edit, I save my files in .jpg, baseline "optimized" at 72ppi. Only following the computer defaults though, not because I think this is best. Would I be better off saving in TIFF or is this not necessary?
    Any links with further info would be appreciated also.
    Thank you,
    Amy

    Amy,
    1. I just took a picture today, and when I look in Image>resize>image size the dimensions are as follows:
    W=2288px H=1712px W=31.778" H=23.778" @72px/in. resolution
    When I change resolution to 325 px/in., W=7.04" H=5.268"
    As the resolution is increased, the dimensions decrease. This is what is called an inverse relation.
    Why did I change to 325px/in? Because for printing it is desirable to have a resolution of 240-300 px/in, or so. Also, note that this resolution gives me almost a perfect 5x7 size format, and one can crop off the excess readily. If one desires 4x6 size, one can crop to that dimension.
    2. I enhance the pictures next, leaving sharpening for the last step
    3. I save primarily in PSD and/or JPEG. Both PSD and TIFF allow one to retain layers, are lossless, and thus one avoids degradation with sequential editing. JPEG is is a compression format which conserves disk space (in comparison to PSD and TIFF), and is most likely required for your e-mail and your photo finisher. I save some of the JPEG files. I usually elect baseline optimized, and the JPEG allows me to elect quality 8, which is good for my purpose and results in a manageable file size.
    4. Right after I download my picture files from the camera, I burn them to a CD (i.e. before I do anything else), and right after I finish the final edits I burn them to CD as well. This is my "film", if you will. If the computer fails or if I should accidentally delete a file from disk, I still have it available.
    I am sure that others will post, but that is my current work flow.
    Ken

  • Changing resolution and image size doesn't change result on screen?

    I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

    gradded,
    The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
    As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
    Hope this helps.

  • I'm getting 3 beeps when I startup the Macbook, and it continues to beep 3 times, what does that mean?, I'm getting 3 beeps when I startup the Macbook, and it continues to beep 3 times, what does that mean?

    Hi,
    Can someone tell me what does the 3 continous beeps mean when trying to startup the Macbook? It won't startup, it just beeps and blinks 3 times continously.

    Yes, I agree with Kappy, here's a problem with your RAM. It happened to a friend's MacBook after he spilt wine on it. Fortunately the splillage on reached the RAM!

  • HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

    hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • When my 6 year old daughter plays the free games that I have downloaded for her IPAD and IPOD, I am now getting upgrade charges on these free games to my AMEX Card. WHy is this happening and how do I get my AMEX card off of the IPAD and IPOD?

    When my 6 year old daughter plays the free games that I have downloaded for her IPAD and IPOD, I am now getting upgrade charges on these free games to my AMEX Card. Why is this happening and how do I get my AMEX card off of the IPAD and IPOD?

    She is making in app purchases. Probably not knowing what that means to your monthly credit card bill. Use the Settings app to enable restrictions and turn on restrictions for iTunes, App Store and in app purchases, mabe some others too. The restrictions will be set with a passcode to prevent your daughter from changing them.
    Settings > General > Restrictions

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Dear Apple I buy a refurbish iPhone 5s the IMEI ******* and ICCID ******** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.  Best regard

    Dear Apple
    I buy a refurbish iPhone 5s the IMEI ******** and ICCID ********** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.
    Best regard
    <Edited by Host>

    This is a user forum. You aren't talking to Apple here.
    Return your iPhone for a refund. There is no way to remove the Activation Lock. Apple won't get involved.
    <Edited by Host>

  • I keep getting the itunes update message and when I accept the terms and conditions it just keeps going back to tell me I have 3 updates itunes, safari and icloud and goes back to accept message without actually downloading?

    What is going on with itunes update?  I keep getting the message that updates are available for itunes, safari and icloud, but when I accept the terms and conditions and the install 3 items message, it keeps going back to telling me there are 3 updates available and have to accept terms and conditions again without it ever installing!! I am using a PC with windows vista.  Have not had this problem till December when I got an ipad and had icloud installed, don't know if there is a connection.

    I can't offer any help but it soulds like Apple goofed with the latest update. Many of us have the same problem. I may wait a week or so to see if Apple responds.

  • My mail is telling me Yahoo server unavailable when i know its not and I cant get mail

    my mail is telling me Yahoo server unavailable when i know its not and I cant get mail

    This most likely means that either the server is unavailable, or your email settings are corrupted. Try deleting the account, rebooting the phone, and adding it back.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?

    How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?
    You need your password to delete it and I need the email address to reset the password.  I feel like I'm going in circles!!!  Please help!!!

    Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address (you shouldn't need to verify the old account).  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Maybe you are looking for

  • How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

    Hi, I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below: http://server/pages/Default.aspx?Title=Arup&Title=Ratan But it always return those items whose "Title" value is "Arup

  • MacBook Pro and TV

    I try to connect my macbook pro to plasma tv samsung with hdmi cable,and i see  desk computer on screen tv  . When i start iphoto ,the TV screen become black and i cannot     see the pictures.Can you help me? Tank you Paul-R.Boucher

  • Stuttering Sound at the Beginning of Each Imported Track

    I'm using the internal DVD drive on my PowerBook G4 to import songs from CD to my iTunes library (located on my internal hard disk). Often times, the tracks I import will have a half-second stutter at the beginning when I play them back. I'm importin

  • New Mighty Mouse have better scrollwheel?

    The new iMacs ship with a new mighty mouse -- anyone know if there's changes to the scroll wheel so it won't get dirty as easily? http://usage.wordpress.com/2007/08/14/apple-quietly-updates-mighty-mouse/

  • Problem combining Spry effects with image captions [was: LShub]

    I am using Spry effects combo sample 2. The thumbnails in the sample are all included within the same preview div. I need to include captions underneath the images, so I have each thumbnail and caption within a separate div. The effect still works ev