I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

Similar Messages

HT204291 I seem to have tried all of the above, but still cannot find the airplay symbol on my Ipad 2. Any suggestions ?

I cannot find the airplay symbol on my Ipad 2. I have tried all suggestions in te troubleshooting guide, but still no success. Please help.

Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock

Can anybody out there with a 6210 download maps wi...

Impossible to dowload mapsto my 6210 using Map Loader V2.02... "no connectionm to the server" message appears...
Tried many things... (several computers, sevral configurations, remove everything, install, unintall, re-install...)
What am I dfing wrong?
If you have a 6210 Navigator and can download maps, pls. tell me how to do it!
If you don't and can help, pls. post too.
Thanks a lot

Thanks, friend.
I've installed a new empty 2 GB card, run Maps once (it creates the file structure on the SD card)and tried to run Map Loader from PC Suite...
No success once more!
The message is the same "Connection to server interrupted. Check your internet connection or try later". [[I'm bored of retrying and waiting, by now...]]
May any Windows firewall config be related with this?
MIGHT ANY NOKIA GUY TRY TO HELP?
Thanks

Update fails--anybody out there with similar experience?

1. I have done the five Rs and checked the disks with DiskUtility.
2. My iTunes file is 12.3GB
3. After an update process begins, about 2.6GB are transferred and then the following message appears:
Attempting to copy to the disk "myiPod" failed. The disk could not be read from or written to.
4. ***?

i think you've already worked through most of the
Mac-relevant troubleshooting for this one from this
document, but just in case:
"Disk cannot be read from or written to" when
syncing iPod or "Firmware update failure" error when
updating or restoring iPod
for the corrupt song file possibility, the techniques
for the -69 (which can also be caused by a bad song
file) from this document might be of some help:
iTunes displays a -69 error when syncing
iPod
b noir
Thanks. It seems to have been bad music files (I am still seeking and disabling).
Your help is very much appreciated.
Take care
Tom

Finder icon jumps up and down and I am not able to access finder. Anyone out there with a solution? help appreciated. /ivan

Finder icon jumps up and down and I can not access finder software. Any solutions out there?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I go to Dropbox and press download I get the download icon but cannot find the picture on my iPad can anybody HELP !!!!!

I am having trouble with downloading files from both Dropbox and iCloud to my ipad2. I
They appear to show as downloading but when I try to find the files there is nothing anywhere
On Android tablets if I have downloads I can normally trace them through a download icon but with the iPad there appears to be nothing
Am I doing something stupid. My tecky level rating is about "2".
HELP.

OK, but how are the pictures being sent to you?
If you using DropBox, tap on the photo in order to open it on the right, and then tap the share icon in the upper right corner. From there you can Save the Image which will transfer it to the Photos app, or you can tap the Open In icon and select any compatible app in which to open and save the photos.
If the photos are being emailed it is basically the same thing. Tap and hold down on it and select Quick Look to open it, tap the Share icon, etc, etc.

Anybody out there with ANY success using Aiport Extreme with a PS3

I have an Airport Extreme and I am getting a DNS error when I try to setup a connection to my Playstation 3.

In the internet sharing options you may need to manually set it to share the WAN IP. I personally haven't had this problem. My PS3 works amazing with my AirPort Extreme. Also when I first setup up my AirPort it was saying something about a double NAT :S anyways I just reset it to factory then manually set it up, and everything connected perfectly. Also you can try setting up an IP reservation and then forward the PSN ports on the AirPort.

Its anybody out there with the funny message "Enter Passcode" on the iPad?

I just got an iPad retina and today the reseler from apple give me a new one becouse was setting a "Passcode" alon without any reason, i use it for draw and surf on internet. It's anyone that had or have the same problem? How to fix this stupid "Passcode" thing? everytime the ipad go on standby next thing that ask is for this "Passcode" and there isnt any pasword setup on the the settings. Thanks guys.

That isn't normal. Is this a reputable reseller? It sounds like you are getting replacement or store demo iPads to me. Just my opinion, but that should not happen.

Is iCloud as good to back up files when an iMac 2007 model does not have an external hard drive is this enough to find files and apps at another time

I have given my iMac 2007 model running mountain lion OSX 10.8.3 to a friend and she doesn't have an external hard drive to back up would using iCloud be as good to back up files pictures etc and can I find them again if lost please.

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

My lap top with Adobe Premiere Elements 8 had a hard drive crash and I cannot find the download for it?

My laptops hard drive crashed and I lost this program. I still have the serial number but cannot find the download for it.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Re Time Machine I have an external hard drive with files I backed up manually over the past 2 years 1TB of memory. I am finally taking the leap to use Time machine to back everything. will I have to reformat that drive, thus wiping my previous bac

Re Time Machine
I have an external hard drive with files I backed up manually over the past 2 years 1TB of memory.
I am finally taking the leap to use Time machine to back everything.
will I have to reformat that drive, thus wiping my previous back ups?
can I split it the drive in two partitions?
Also
as I have two separate Macbook Pro's- one older than the other.
OSX 10.68
the other is
OSX 10.75
can I back them up separately?
or even synch and merge files and folders etc? between the two?

You CAN use a drive with files already on it to store Time Machine backups. But long term, that is not recommended. You do not need to reformat or re-partition the drive to do this. Once Time Machine Backups are established, you could remove the old files.
But do not delete Time Machines files with the Finder -- that can cause it to lose its place and lose everything.
With the cost of backup drives under US$100, it might be a better idea in the long run to get another drive. Best results from Time Machine is a drive about 3 times larger than the drive(s) you are backing up.

Secure link to itunes store failed computer not connected to internet tried ununininstalling everything to do with itunes no joy also error code coming up E0000225 anybody out there got any ideas

Secure link to itunes store failed, (computer not connected to internet tried uninstalling everything to do with itunes,no joy also errror code E0000225 appearing. Have turned off windows firewall and also my Bullguarg security settings.Can anybody out there please help me thanks.

Hi,
You could be right that the response to clicking on help is a symptom of an entirely separate issue, but nevertheless the secure link to itunes is definitely failed, and I am unable to log into Itunes on either PC.
I also noticed that even if I click on the link to create a whole new Apple ID, I cannot do that either, presumably because the secure link is not working.
After I noticed that there were weird things happening this morning, I did change my Apple ID password in the hope that this might resolve it, but it seemed to make it worse. Now, all of my apple devices keep constantly prompting me for the apple ID password, and randomly either accepting it, or telling me it is wrong. I know the password is correct because I can log onto the apple Manage My Apple ID screens in a web browser with it.
I was starting to think that this is an ISP issue (BT Broadband), but I have not seen anyone else posting with the same issue. Does Apple use a different security protocol to everyone else? I'm asking because all other secure services seem to be working fine, but anything related to apple that requires a secure connection or authentication is having issues.
I have also seen reference to making sure that Itunes is listed as an allowed program in Windows Firewall. I cannot seem to do this because it says that my Windows firewall is being managed by McCafee. I have checked the settings in McCafee, and it appears to me that Itunes, Bonjour, and many other apple programs have been granted "Full" access. As said before in any case I have tried temporarily disabling the firewall and even this did not solve the problem.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Similar Messages

Maybe you are looking for