I have a Form where some fields do not render using Acrobat??

It's a 17 Page Government of California Form - this form is built correctly and works perfectly using BlueBeam, Foxit, Cute, Nitro and Nuance yet Acrobat X and Reader do not render some fields and crashes while scrolling - why is this happening?
Cheers

No - but I can email it to you or send it somewhere and explain to you the fields that aren't rendering?

Similar Messages

What are the benefit of the new safari upgrade? I have read instances where some users were not satisfied with it.

I am using an imac 8gb

One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

Is there a way to create forms where certain fields would become required only if there was a certain choice made in a dropdown box in another field?

Is there a way to create forms where certain fields would become required only if there was a certain choice made in a dropdown box in another field?

Yes but you will have to create some custom JavaScript to do this.
Also you should be aware that the "Required" property is only processed when the form is submitted to a scripted web page or "mailto:" process.

How to display subtotal in ALV, where the field is not a numeric.

Hi
We are having a requirement to display the sub total for a field using ALV grid display, where the field is not numeric.
The field is characte, Status field(consists of values Submit, Approve ,Reject), where the subtotal should be value of count of group by status .
say status with submit are 10 records, so after all records with submit status are, displyed, we need to display its subtotal as 10.
Thanks & Advance

Hi Satya,
REPORT z_alv_subtotal.*&---------------------------------------------------------------------*
*& Table declaration
*&---------------------------------------------------------------------*TABLES: ekko.*&---------------------------------------------------------------------*
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV*&---------------------------------------------------------------------*
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.*&---------------------------------------------------------------------*
*& Type declaration
*&---------------------------------------------------------------------** Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
       ebeln TYPE char30, " Document no.
       ebelp TYPE ebelp,   " Item no
       matnr TYPE matnr,   " Material no
       matnr1 TYPE matnr,   " Material no
       werks TYPE werks_d, " Plant
       werks1 TYPE werks_d, " Plant
       ntgew TYPE entge,   " Net weight
       gewe   TYPE egewe,   " Unit of weight
       END OF x_data.*&---------------------------------------------------------------------*
*& Internal table declaration
DATA:* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
* Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
* Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
* Internal table for ALV Display events
i_events TYPE slis_t_event,
* Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.*&---------------------------------------------------------------------*
*& Work area declaration
*&---------------------------------------------------------------------*DATA:
wa_ekko TYPE x_data,
wa_layout     TYPE slis_layout_alv,
wa_events         TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.*&---------------------------------------------------------------------*
*& Constant declaration
*&---------------------------------------------------------------------*CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.*&---------------------------------------------------------------------*
*& Start-of-selection event
*&---------------------------------------------------------------------*START-OF-SELECTION.* Select data from ekpo
SELECT ebeln " Doc no
         ebelp " Item
         matnr " Material
         matnr " Material
         werks " Plant
         werks " Plant
         ntgew " Quantity
         gewei " Unit
         FROM ekpo
         INTO TABLE i_ekpo
         WHERE ebeln IN s_ebeln
         AND ntgew NE '0.00'. IF sy-subrc = 0.
    SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.* To build the Page header
PERFORM sub_build_header.* To prepare field catalog
PERFORM sub_field_catalog.* Perform to populate the layout structure
PERFORM sub_populate_layout.* Perform to populate the sort table.
PERFORM sub_populate_sort.* Perform to populate ALV event
PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
PERFORM sub_alv_report_display.
*&      Form sub_build_header
*       To build the header
*       No Parameter
FORM sub_build_header .* Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
* Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.* Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
         l_date.ENDFORM.                    " sub_build_header
*&      Form sub_field_catalog
*       Build Field Catalog
*       No Parameter
FORM sub_field_catalog .* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:     '01' '01' 'EBELN' 'I_EKPO' 'L'
     'Doc No'(003) ' ' ' ' ' ' ' ',     '01' '02' 'EBELP' 'I_EKPO' 'L'
     'Item No'(004) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR' 'I_EKPO' 'L'
     'Material No'(005) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR1' 'I_EKPO' 'L'
     'Material No'(005) ' ' ' ' ' ' ' ',
     '01' '04' 'WERKS' 'I_EKPO' 'L'
     'Plant'(006) 'X' 'X' ' ' ' ',     '01' '04' 'WERKS1' 'I_EKPO' 'L'
     'Plant'(006) ' ' ' ' ' ' ' ',     '01' '05' 'NTGEW' 'I_EKPO' 'R'
     'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.                    " sub_field_catalog*&---------------------------------------------------------------------*
*&     Form sub_fill_alv_field_catalog
*&     For building Field Catalog
*&     p_rowpos   Row position
*&     p_colpos   Col position
*&     p_fldnam   Fldname
*&     p_tabnam   Tabname
*&     p_justif   Justification
*&     p_seltext Seltext
*&     p_out      no out
*&     p_tech     Technical field
*&     p_qfield   Quantity field
*&     p_qtab     Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos    TYPE sycurow
                                        p_colpos    TYPE sycucol
                                        p_fldnam    TYPE fieldname
                                        p_tabnam    TYPE tabname
                                        p_justif    TYPE char1
                                        p_seltext   TYPE dd03p-scrtext_l
                                        p_out       TYPE char1
                                        p_tech      TYPE char1
                                        p_qfield    TYPE slis_fieldname
                                        p_qtab      TYPE slis_tabname.* Local declaration for field catalog
DATA: wa_lfl_fcat    TYPE slis_fieldcat_alv. wa_lfl_fcat-row_pos        = p_rowpos.     "Row
wa_lfl_fcat-col_pos        = p_colpos.     "Column
wa_lfl_fcat-fieldname      = p_fldnam.     "Field Name
wa_lfl_fcat-tabname        = p_tabnam.     "Internal Table Name
wa_lfl_fcat-just           = p_justif.     "Screen Justified
wa_lfl_fcat-seltext_l      = p_seltext.    "Field Text
wa_lfl_fcat-no_out         = p_out.        "No output
wa_lfl_fcat-tech           = p_tech.       "Technical field
wa_lfl_fcat-qfieldname     = p_qfield.     "Quantity unit
wa_lfl_fcat-qtabname       = p_qtab .      "Quantity table IF p_fldnam = 'NTGEW'.
    wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.                    " sub_fill_alv_field_catalog*&---------------------------------------------------------------------*
*&      Form sub_populate_layout
*       Populate ALV layout
*       No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM.                    " sub_populate_layout*&---------------------------------------------------------------------*
*&      Form sub_populate_sort
*       Populate ALV sort table
*       No Parameter
FORM sub_populate_sort .* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort*&---------------------------------------------------------------------*
*&      Form sub_get_event
*       Get ALV grid event and pass the form name to subtotal_text
*       event
*       No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.* Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.                    " sub_get_event*&---------------------------------------------------------------------*
*&      Form sub_alv_report_display
*       For ALV Report Display
*       No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
*    MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM.                    " sub_alv_report_display*&---------------------------------------------------------------------*
*       FORM sub_alv_top_of_page
*       Call ALV top of page
*       No parameter
*---------------------------------------------------------------------*FORM sub_alv_top_of_page.                                   "#EC CALLED* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_alv_top_of_page.
ENDFORM.                    "alv_top_of_page*&---------------------------------------------------------------------*
*&      Form subtotal_text
*       Build subtotal text
*       P_total Total
*       p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
* Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
    p_subtot_text-display_text_for_subtotal
    = 'Material level total'(009).
ENDIF.* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
    p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM.                    "subtotal_text
Regards,
Pravin

I am a new Mac user and I bought Pages and have no Idea where it is or how to use it?

I am a new Mac user and I bought the Pages APP and have no Idea where it is or how to use it? If I go into Iwork and click Pages it shows 3 documents that I have creates. THe only option I have is to download it. Then If I click it it opend in an app called Preview.
It is in me apps folder in Itunes. I expected it to be an app in my computer.

Pages for IOS and Pages for OSX are 2 different programs, buying one doesn't get you the other, go to the App Store (not iTunes) on your Mac and buy it.

I have problem sending a email ..spool not created using custom FM

Hi experts,
i have problem sending a email ..spool not created using custom FM...this the custom FM
* Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
Source code
this is the source code for this FM
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    IF sy-subrc IS NOT INITIAL.
      MESSAGE e040(zhrcd) RAISING spool_not_created.
    ENDIF.
    PERFORM process_email USING email1
                                email2
                                email3
                                subject
                                attachment_name.
    WAIT UP TO 5 SECONDS.
    SUBMIT rsconn01 WITH mode   = 'INT'
                    WITH output = 'X'
                    AND RETURN.
ENDIF.....
Please let me know
Edited by: Thomas Zloch on Nov 16, 2010 5:53 PM - please use code tags

Hi srinivas ,
Could you please Check
FORM summary_report .
DATA: lv_success TYPE i,
          lv_error TYPE i,
          lv_total TYPE i.
DESCRIBE TABLE gt_data LINES lv_success.
DESCRIBE TABLE gt_error LINES lv_error.
DESCRIBE TABLE gt_message LINES lv_error.
lv_total = lv_success + lv_error.
lv_total = lv_success.
gwa_summary-record = text-008."Number of Successful records.
gwa_summary-number = lv_success.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-009."Number of error records'.
gwa_summary-number = lv_error.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-010."Total number of records processed.
gwa_summary-number = lv_total.
APPEND gwa_summary TO gt_summary.
CLEAR gt_fieldcat.
gwa_fieldcat_summ-col_pos = 1 .
gwa_fieldcat_summ-fieldname = 'RECORD'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-011."Records
gwa_fieldcat_summ-outputlen = '70'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
gwa_fieldcat_summ-col_pos = 2 .
gwa_fieldcat_summ-fieldname = 'NUMBER'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-012."Number
gwa_fieldcat_summ-outputlen = '10'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
ENDFORM.                    " SUMMARY_REPORT
*&      Form ERROR_REPORT
FORM error_report .
gt_fieldcat_err[] = gt_fieldcat[].
gv_fieldcat_err-col_pos = 1.
gv_fieldcat_err-fieldname = 'PERNR'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-070."Employee Number
gv_fieldcat_err-outputlen = '20'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
gv_fieldcat_err-col_pos = 2.
gv_fieldcat_err-fieldname = 'MESSAGE'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-071."Error Message
gv_fieldcat_err-outputlen = '80'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
ENDFORM.                    " ERROR_REPORT
*&      Form FINAL_REPORT
FORM final_report .
DATA:lv_layout TYPE slis_layout_alv,
         lt_events_summ TYPE slis_t_event,
         lv_events_summ LIKE LINE OF lt_events_summ,
         lt_events_det TYPE slis_t_event,
         lv_events_det LIKE LINE OF lt_events_det,
         lt_events_err TYPE slis_t_event,
         lv_events_err LIKE LINE OF lt_events_det,
         lt_events_msg TYPE slis_t_event,
         lv_events_msg LIKE LINE OF lt_events_det.
lv_events_summ-name = 'TOP_OF_PAGE'.
lv_events_summ-form = 'TOP_OF_PAGE1'.
APPEND lv_events_summ TO lt_events_summ.
lv_events_det-name = 'TOP_OF_PAGE'.
lv_events_det-form = 'TOP_OF_PAGE2'.
APPEND lv_events_det TO lt_events_det.
lv_events_err-name = 'TOP_OF_PAGE'.
lv_events_err-form = 'TOP_OF_PAGE3'.
APPEND lv_events_err TO lt_events_err.
lv_events_msg-name = 'TOP_OF_PAGE'.
lv_events_msg-form = 'TOP_OF_PAGE4'.
APPEND lv_events_msg TO lt_events_msg.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat_summ
      i_tabname                        = 'IT_SUMMARY'
      it_events                        = lt_events_summ
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_summary
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF CHK_DTL IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat
      i_tabname                        = 'gt_data'
      it_events                        = lt_events_det
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_data
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_err
     i_tabname   = 'gt_error'
     it_events   = lt_events_err
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_msg
     i_tabname   = 'gt_message'
     it_events   = lt_events_msg
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_err
      i_tabname   = 'gt_message'
      it_events   = lt_events_err
    TABLES
      t_outtab    = gt_message.
IF GT_MESSAGE[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_msg
      i_tabname   = 'gt_message'
      it_events   = lt_events_msg
    TABLES
      t_outtab    = gt_message.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
   i_interface_check             = ' '
IS_PRINT                      =
   i_screen_start_column         = 0
   i_screen_start_line           = 0
   i_screen_end_column           = 0
   i_screen_end_line             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       =
ES_EXIT_CAUSED_BY_USER        =
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
ENDFORM.                    " FINAL_REPORT
*&      Form top_of_page
      text
FORM top_of_page1.                                          "#EC CALLED
WRITE text-013."SUMMARY REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page2
      text
FORM top_of_page2.                                          "#EC CALLED
WRITE text-014."DETAIL REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page3
      text
FORM top_of_page3.                                          "#EC CALLED
WRITE text-015."ERROR REPORT
ENDFORM.                    "top_of_page
*&      Form EMAIL_NOTIFICATION
FORM email_notification .
DATA: lv_email1 TYPE somlreci1-receiver,
       lv_email2 TYPE somlreci1-receiver,
       lv_email3 TYPE somlreci1-receiver,
       lv_subject TYPE char200,
       c_flag     TYPE c           VALUE 'X',
       lv_attachment TYPE char50.
CLEAR: lv_email1,
         lv_email2,
         lv_email3,
         lv_subject,
         lv_attachment.
SELECT SINGLE email1
                email2
                email3
    FROM zhr_interface_pr
    INTO (lv_email1,lv_email2,lv_email3)
    WHERE zinterfaceid EQ gc_objectid.
IF sy-subrc EQ 0.
    IF sy-batch EQ 'X'.
Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "
Edited by: katewinslate@SAP on Nov 17, 2010 12:50 PM

SOME FIELDS SHOULD NOT SHOWN IN THE REPORT

Hi,
this is to inform you that, there is a requriment in reporting perspective (ALV),
Requriment:
i have to generate a ALV report which is viewed by our CFO with one t.code, in that report suppose there are 10 fields.
That is a specific report if some body apart from my CFO uses the same tcode to generate the same report than it has to display only 5 fields.
if my CFO uses the same t.code all the 10 fields must be visible.
please help me how to do it.
regards,
balajia.

There are couple of ways to achieve this,
1) - Create 2 variants, 1 variant for CFO with all the fields & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
Eg: UserID -
Fields
CFO -
ALL ( report should display all the fields)
NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
Regards,
Reazuddin MD

R12-Check Printing-Some fields are not shown in Arabic

Hi, we have a unique problem while printing the checks some fields are printed correctly in Arabic and some are printed in english, once in english are payee name, payee address, invoice number . am i missing something here, any help is appreciated.
Regards
Santy

There are couple of ways to achieve this,
1) - Create 2 variants, 1 variant for CFO with all the fields & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
Eg: UserID -
Fields
CFO -
ALL ( report should display all the fields)
NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
Regards,
Reazuddin MD

When i hide some fields from the Editform using javascript, what will happen to the fields that hve been hidden

I am working on an EnterpriseWiki site collection, and when users edit the page properties as follow:-
then will get all the fields inside the EnterpriseWiki content type as follow:-
now i want to hide all the fields except the ; Title & Name, so i edit the EditForm and i add the following script:-
<script>
$('#formTbl tr').filter(function ()
return !$(".ms-standardheader", this).text().match(/Name|Title/i);
}).remove();
</script>
so currently when users edit the wiki page properties they can only edit the Name & Title, because the script hide the other fields.
My question is what will happen to the other values such as the page content, assign to , etc that have been hidden.. I test this and seems that when editing the name and title the other values will not get effected which is what i need, but not sure how
did SharePoint handle this, i was afraid that hiding the other columns will set their values as null or empty if the user save the editform with only the title and name inside it ? can anyone adivce on this ?

Hi John,
From your description, my understanding is that you are worried about the values of some fields
will been saved as empty if you hide them in EditForm.
If you hide some fields in EditForm, it means that you could not edit them. These fields’ values will not be changed after editing Title field or Name field. When you click Save button, they will be still the values before changing the Title field or Name
field.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
i found this very critical issue with hiding the fields from the edit form, now i wrote the following script inside the edit form , to hide all the fields except the Name
<script>
$(document).ready(function(){
$('#formTbl tr').filter(function () {
return !$(".ms-standardheader", this).text().match(/Name/i); }).hide();
$('#ctl00_ctl40_g_6c7d849e_da6b_4138_be9f_b99bde542065_ctl00_ctl02_ctl00_ctl04_c‌ tl00_WebPartMaintenancePageLink').hide(); });
</script>"
. and now if I submit the editform (which only contain the Name) all the html tables inside the wiki page content will be removed.

Transformation : some fields are not visble in Source DSO

Hi
i have done mapping in transformation by connecting one Write Optimized DSO with a Standard DSo.
Both DSO have same fields. But i am seeing some of the fields are not visible in Write optimized DSO in Transformation
so those fields can not be mapped with corresponding Standard DSO fields.
let me know how those fields can be make visible in Transformation.
Regards
Atul

Hi ,
"Attribute Only" will not be visible , only method to to do this maybe something like below .
1) Look at the keys of the standard DSO , pick up the same combination and the attribute only fields from the source in the start routine of the TFM .
2) in the field level routine of the TFM (for the atrribute only fields ) , read the tables with keys and populate .
--Neha

Delete records in itab1 where key fields does not exit in itab2 w/o Loop

Hi,
I am trying to find the most efficient way to compare two internal tables and filter out (delete) the entries in Internal Table 1 (ITAB1) where the key fields does not exist in internal table 2 (ITAB2).
Here is the codes using the Loop.
Loop at itab1.
read table itab2 where field1 = itab1-field1 and field2 = itab1-field2.
if sy-subrc ne 0.
delete itab1 where field1 = itab1-field1 and field2 = itab-field2.
endif.
endloop.
Instead of looping thru each record of ITAB1, is there a way to use the "DELETE" or other efficient way? This is in ECC 6.0.
Thanks for any advice in advance.

Not sure if its possible without using even a single loop. Though you can avoid the read statement this way
loop at itab2.
delete itab1 where field1 NE itab2-field1 and field2 NE itab2-field2.
endloop.

I have been randomly missing some of my notes on my iphone. even i recreate it they sometimes disappear. I was on the computer tonight and while in my email I decided to click on the notes section of my yahoo email page. I found my missing notes there.

How do I stop my notes from iphone moving to notes section of my email?

Hi Debbie,
It sounds like you currently have Yahoo activesync set as your default notes account.
To turn this off, go to settings>mail contacts and calendars, scroll down to your yahoo mail account, tap on that, and turn off "notes"
To double check which account your notes are being saved onto when you create them, in notes tap on "accounts" in the upper left hand corner, and tap on where you want those notes to be stored

Form Radio Buttons or Checkboxes not created in Acrobat 9 Pro

If this needs to be placed in another forum, please just let me know.
I am using Acrobat 9 Pro - current version - 9.4.3.
I am using Word 2010
I am running Windows 7
I have created a simple form in Word. Using the guidelines from the white paper - Acro9_designforms.pdf provided by Adobe, those fields where I want a radio button insert a checkbox instead when running the Form Wizard in Acrobat.
My sample is exactly the same as in the sample used in the white paper.
I used a circle symbol from the Wingdings font, as recommended by Adobe.
Salutation
O Mr.
O Ms.
O Dr.
The end result is still a checkbox, even though it is a circle in the display.
What am I doing wrong?
I do not want to use LiveCycle Designer, as once the form is created in LiveCycle, the form fields can no longer be edited in Acrobat and I must maintain the ability to edit in Acrobat.
Thank you for your assistance.

Oh, the Wizard is a fabulous tool for basic forms. And, since Adobe has given an extensive list of 'guidelines', which is what I am testing, I thought I would ask for feedback from those who do use it and from those who have had success in using it.
The Wizard is mostly terrific, if you use the guidelines when setting up the source document. It saves a lot of manual field creation and fixing later. This one, though, is not working as expected. So, I might be doing something wrong and the responses I seek are from those who have had success with the feature - not with manual workarounds, which of course we know can be achieved. :)
Nothing is "magic". I don't think either I or Adobe are implying that it should be. However, when they state a feature works in a certain way and I am not getting those results, I like to explore why. Silly me. hahaha
The example I gave in my initial post is the only thing in the form, as I am testing the features for when I present this topic.
I am merely trying to determine if others are having success (or not) when creating their document initially in Word (for example), using the guidelines that Adobe states for Radio Buttons being created. If there is a certain font that someone is having success with other than those stated by Adobe, I would love to know. For me, so far, it is not. If it's user error, then I would love to know from someone who has had success.
Here is what Adobe states as part of their Radio Button form field guidelines when setting up a document in Word, for example:
§ Use circular objects or numbered buttons to in a single row or column to indicate radio buttons.
§ Use group labels to the left of or above each radio button group – otherwise they will default to check boxes. Field names are determined from the group labels and individual button labels from the text to the right of each location.
§ Use the following text labels to have radio buttons created automatically: Yes/No, M/F, Male/Female, Mr/Mrs/Miss/Dr.
§ Use one of the following group labels to have radio buttons created automatically: Salutation, Sex, Occupation.
thanks

Adobe form taking too much time to render using Web dynpro ABAP

Dear All,
we are rendering an Adobe form online to view employee profile, the form is hardly 100KB but it takes 5 minutes to render in the browser. I have checked the performance of abap code and there is no performance issue. the form shows downloaded 100kb ot 100kb and then I get the wait symbol for quite sometime and after a few minutes wait it renders. the form has XML based interface and ZCI layout. I have done a HTTP trace and could not trace out anything, so I suspect it is something to do at the client level.
Can anyone help me to identify what and where exaclty is the problem.
Is it with the
1. Adobe Reader ? - I have adobe X reader
2. Is it to do with any browser or Adobe reader settings?
3. Is it do with ADS?
4. Or any other compatibility issues?
Any pointers is appreciated. 5 minutes is too long to render a 100 KB form.
Thanks in Advance.
Raghavendra Prabhu

Please go through the below link, hope you may get any help...
http://www.stechno.net/sap-notes.html?view=sapnote&id=1785100
Naveen

I have a Form where some fields do not render using Acrobat??

Similar Messages

Maybe you are looking for