I have a pdf. document with 100 pages. These are white postcards with addresses. I need to move all the address farther to the left. How can I move them all at the same time?

1) I need to drag the same text on 100 pages at the same time to the same place. Is there a simultaneous way I can do this? the pdf file has 100 pages of a 4x 6 posta cards that contain addresses: one address per page, I need to select all addresses and at the same time move them to the same place within the postcard. I can select the text on one card (page) at a time and drag it to the desired place. The PROBLEM is that I need to do it at the same time on every page. otherwise it takes too long. PRODUCT IS ABOBE ACROBAT

This it not the kind of editing task that one should do in a PDF file. It is not meant to be edited in such a way.
You should try to get the original file used to create the PDF, edit it and then create a new PDF from it.

Similar Messages

I run Firefox with at least twenty tabs open at the same time. Version 23 (and later versions) load the tabs MUCH more slowly (2 mins rather than 15 secs). HELP

I run Firefox with at least twenty tabs open at the same time. All versions of Firefox newer than version 22 ) load the tabs MUCH more slowly ( approx 2 mins rather than merely 15 secs). HELP!!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also check your security software.
You can use the Network tab (the one at the right in the menu) in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) to check the server response (left-click an entry) see if that is the problem (reload via Ctrl+F5 to bypass the cache).
*https://developer.mozilla.org/en/Tools/Web_Console

Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe here:
Trouble installing iTunes or QuickTime for Windows
iOS: Device not recognized in iTunes for Windows
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Have downloaded 5s iPhone. Instructions for activating iCloud gives wrong email address to verify account. How can I get around this problem and get my phone set up with iCloud

Have downloaded 5s iPhone. Instructions for activating iCloud gives wrong email address to verify account. How can I get around this problem and get my phone set up with iCloud

elhoseny wrote:
... Instructions for activating iCloud gives wrong email address to verify account..
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

Podcasting with skype,ichat and garage band at the same time

Hi,
so here is my problem I have a podcast show and I record one of my hosts through i chat into garage band and the other is a phone guest through skype.....everything is going through an alesis mixer...the problem is my i chat host cannot hear the skype phone guest....what should I do??

Microphone into mixer. Output of computer into mixer. Skype and iChat routed to computer output. Skype, iChat and Garageband inputs all set to mixer output (either analogue output plugged into computer line in or using the USB connection). Turn monitoring in GB off.
Now everyone should be able to hear everyone, but the Skype and iChat contributors will also hear themselves coming back with a delay, which makes it very difficult to talk.
There is a way round this, but it involves having two separate audio-USB interfaces (which shouldn't be the same model) - they need to be able to handle both ways at the same time, and many don't. I assume that your Alesis is much the same as mine.
Microphone to mixer. Skype output and input to interface A. iChat output and input to interface B. Set GarageBand input to mixer main output as above.
Microphone channel : turn up sends to Aux A and B
Skype channel: turn up send to Aux B only
iChat channel: turn up send to Aux A only
Plug Aux A output to interface A
Plug Aux B output to interface B
You have now set up what is called 'clean feed' in the UK ('mix minus' in the USA). Skype should receive the microphone and iChat but not itself, iChat should receive the microphone and Skype but not itself. Everything should be heard by Garageband.
You may find some difficulty in getting this to work. The main sticking point is going to be that the interfaces have to work in both directions at the same time, and as I said, many don't.
Skype will handle conference calls and this would be a simpler solution!

Problems with magic mouse and wireless keyboard at the same time

I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
What do you think about rarely issue?
Thanks.

Hello:
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

Can you pair with an iMac and an iPad at the same time?

If you have an iMac and an iPad, is it possible to pair the same Apple Wireless Keyboard with both of them, rather than having to buy two Wireless Keyboards?

I've kind of found an answer to my question, but I'm not totally satisfied. Basically, yes, you can use one Apple Wireless Keyboard with an iMac and iPad, but obviously not at the same time.
To switch the Apple Wireless Keyboard over from working with the iMac to working with the iPad, you first have to "Disconnect" the keyboard in System Preferences > Bluetooth. This frees up the keyboard, making it available for the iPad to access.

How can I call multiple records(40) at same time as webservice ?

Hi All
My scenario is some thing like calling SOAP(Webservice) to Rfc(BAPI)
Thing is how can i call multiple records at the same time using the SOAP
adapter i.e i need to make a request to BAPI and in the BAPI response
based on the fields, i need to send to different records....it is Sync call
Can any explain me how to implement this scenario ?
Regards
Kiran lvs

HI,
Please see the below link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
Regards
Chilla..

I have a PDF document with 10 pages that I need to make into a book?

I received a PDF file containing 10 pages of a newsletter that needs to be turned into a book using InDesign. Is there a method that I may use to take the pages from this PDF file and make a book with 10 pages in InDesign?

for a 'simple' book:
create a new indesign document with 10 pages--uncheck facing pages in the setup dialog--set the page size, margins, bleeds--then--go to file>place>locate the PDF--check the checkbox that says 'show import options' choose 'media' from dropdown menu -- choose (pages) ALL-- double click the file name (the PDF)--this will load all 10 pages to your cursor--go to page 1--click with cursor (this will place page 1) go to page 2 and click, page 3 click, etc etc--you can go back and re-position the pages later...
note: if the plan is to print and staple the book, you will need 12 pages--and also note--the placed art will not be editable.

How to "save as" a pdf form with another name? So not over the same document, is it possible?

I have made a form in acrobat pro and i want use this form on the Ipad. But on the Ipad with acrobat reader save the document automatically and i want save all the versions and not finally one document..Can somebody tell me this is possible or not?!

It sounds like you want to duplicate a PDF document. View the document list, and click Edit. Select the document to be duplicated. Select the Duplicate/Move icon (on an iPhone the icon shows two documents). Select Duplicate.

Is it possible to stream Video to Apple TV (via Beamer with no real audio output) and at the same time stream Audio to an Airplay compatible device? (Bose Soundtouch)

I currently have the following set-up:
Ipad Mini Retina (with Airplay)
Beamer without proper audio output (picobeamer)
Bose Soundtouch (with Airplay)
Apple TV (3rd Gen)
When I stream a video via the Ipad, I either have the sound on my Soundtouch or Video via the beamer. Is there an option to have both at same moment? It really looks like I cannot have both at the same moment?
Thanks in advance.

Welcome to the Apple Community.
Unfortunately, you can't split the Airplay stream as you would like to.

Help with recording midi instruments : two sources at the same time

Hi -
I'm trying to learn Logic after using Performer for years, and though the audio is fine, I just can't get the midi to work doing something really simple.
I have a MOTU midi express XT, which is an 8 channel midi interface. Piano plugged into channel 1, drumkit plugged into channel 2. I want to play both and record both, which should be easy, but I am stuck at the first hurdle.
So, new project, add a midi track for the piano, and select XT1 and plays and records fine. Add a track for the drums, and try to put it onto XT2, and now the keyboard plays the drums when I press the keys. Likewise, the drum kit triggers the piano. I have tried unchecked auto demix by channel but that doesn't help.
This ought to be trivial, but even with the manual, I cannot figure out how to simply choose midi input and output per track.
If anyone has a tip I would be very grateful!
thanks
Steve

goldensteve wrote:
I believe that I have followed your instructions, but I am seeing the same result: both midi sources trigger (and record) each other. Hmm.
It looks like the midi channels are not set properly or something like that...
What kind of midi tracks have you created - Software Instrument tracks - if yes set their midi channels to 1 and 2 ? If you have created Standard Instrument objects and want to use them with external sound device check the midi channels of these Standard Instrument objects again in the Environment of in the Arrange track Inspector - they must be set to ch.1 and ch.2.
If you use a Multi Instrument set it to ch.All in the Environment and create tracks for its sub midi channels 1 & 2 in the Arrange.
The Autodemix by midi channel Logic setting must be enabled as Bee Jay mentioned as well both tracks must be armed "R" !
Go to Click & Ports Environment layer and have a look at the "Input View" Monitor to check the incoming midi channels of the external instruments. Play a piano note(let's say C2) on the first instrument which is set to ch.1 - you must see some midi message like:
"1 C2 56" in the Monitor - which means ch1. Note=C2 vel=56.
Trigger a drum note (A2 for example) on the second instrument (Drums Set) on ch.2, so it must be shown as "2 A2 78" which confirms that the midi channel i.s OK. If not, then you must check you hardware settings again etc.
PS. If these re-instructions do not solve your problem, please provide a download link of this Logic project song so we can check up it. Make a short description on which tracks you try to record or just name them "Piano" & "Drum Set" something like that.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

How to work with 50i and 30f/p footage at the same time - FCPX XHA1s

Hi all,
Brand new to iMac and FCPX... so really hoping for some help from the more experienced out there!
I've been shooting in 50i on my XHA1s for about a year, but have faced lots of interlacing issues which I've never managed to resolve. I didn't have a particular reason for shooting 50i, other than it was the default setting and optimum in terms of image quality I suppose.
Anyway, after much reading I've decided to switch to 30f/p as a fixed setting moving forward... so my question is, how will I work with these two types of footage in FCPX in the same projects/movies?
Is it simply a case of importing my new 30f footage and letting FCPX do the work, or will I have to get involved in settings? Presumably what I am trying to do is a possibility in the first place?! I really hope so, as I need to still use lots of my 50i footage in projects, at least for a few months anyway...
Any help or insights would be hugely appreciated, and thanks in advance!
Jimmy

You can used to Matrix3f
This object is a rotation and translate matrix
for example:
private void componerTransformada(){
Quat4f rot = new Quat4f((float) this.getRotacionSobreX(),(float) this.getRotacionSobreY(),
(float) this.getRotacionSobreZ(),1.0f);
Vector3f tras = new Vector3f(-4.0f,-4.0f,(-1)*this.getDistanciaDeLaCamara());
this.setTransformacion(new Transform3D(new Matrix4f(rot, tras, 1.0f)));
Quat4f is a matrix of ratation
vector3f is a direction vector
Transform3d is building with Quat4f and Vector3f.
That is work i use this to situe the view of point.
good locky

Can someone please tell me why when I order an Itunes app. , do I always get charged twice for the same thing. It has happened on two different occasions. Does it have anything to do with having 2 different ipods linked to the same account?

Can someone please tell me why when i order an app on my sons ipod, do I get charged twice for it? When I tried do report a problem with the charge, it said that I can not get a refund on that item. This is the second time this has happened to me. Does it have anything to do with having more then one ipod linked to the same account? Thanks for any help you can give me!!!

It has nothing to do with have more than one device using that account.
After you purchase it once, you redownload it on other devices by the following, not like purchasing a new app.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you really got charged twice for purchases the same app twice with the same account contact iTunes again by:
Apple - Support - iTunes - Contact Us
Make sure that they are really the same app first.

I have a pdf. document with 100 pages. These are white postcards with addresses. I need to move all the address farther to the left. How can I move them all at the same time?

Similar Messages

Maybe you are looking for