I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again
I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again. Any ideas?
Hmmm.. sorry to jump in but...
I Wish I had seen this before I got mine.
Mine has been doing this auto eject stuff too.
I think I just plugged it in and TM let me select it but is it possible
I should have reformatted it with DU first, like with all the WD drive problems ?
Is it too late for that ?
Or just try to return it or get rid of it ?
TIA
Similar Messages
-
How do I backup iPhoto using a Seagate FreeAgent GoFlex external drive?
How do I backup iPhoto photos using a Seagate FreeAgent GoFlex external drive?
You may use Time Machine or 'drag and drop'. Don't forget to format the new HDD in Disk Utility>Erase first.
Ciao. -
I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?
Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire. -
I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?
Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/ -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me. -
I have my complete computer using Lion backed up on the time machine. Then I installed Mountain lion. I do not like it at all. Is there a way I can remove ML and put my old Lion system back pin my computer?
If you have got a backup, press Command and R keys in boot and restore an old backup. You can install Snow Leopard and upgrade to Lion if you haven't got the backup
-
My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?
Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc
-
Include a network drive in the Time Machine backup?
I have a USB drive connected to the Airport Extreme. I would like its contents be included in the Time Machine backup.
Is this possible?Yes. Make sure you have the network drive connected and go to System Preferences > Time Machine > Options. Select the network drive and click the – button. This will include the drive in your backups, although, depending on the speed of your network and the size/quantity of files being backed up, it may take a long time for TIme Machine backups to complete. Also be aware that the drive must be mounted (that is, you must be connected to the drive) for Time Machine to back it up, although once you have performed the steps above, all you will need to to do is connect to the drive for it to be backed up in the future.
-
Can't access Time Machine backups after erase and install
Had iMac checked by Apple Authorized Service Provider after experiencing multiple problems I couldn't fix. No hardware problem. He did an erase and install of 10.5.8. The machine accesses my Time Machine backup, but in Time Machine/ iMacHome/ Sharing & Permissions says, "You can only read." If I access a folder in Home, like Desktop or Documents, it says,"You have no access." Permissions are locked and grayed out.
I spent over two hours on the phone with tech support last evening, and he finally said he'd have to turn it over to Apple engineers, which would take a few days.
Migration assistant only allows "all or nothing" migration, and I need to select just certain folders; I do not want to restore anything that might be corrupted.
Is it possible I could have an undetected hardware problem? Has anyone else done an erase and install and been able to use Time Machine backups to pick and choose what they wanted to restore?Thank you for your reply. The apple support tech should have known this, but he didn't. However, in the course of our two hour discussion he said "Maybe it's because the computer name is different." I hadn't reached the new-set-up stage where I had changed the name of the computer from Apple's default, so I did that. My short name home folder I had already named the same as before, iMacHome.
But changing the computer name didn't help. After reading your reply, I unlocked the preferences (which were locked and grayed out in TM) to my home folder in the finder and assigned read and write to all folders within for everyone. Back in TM, preferences were no longer grayed out, but changing privileges was. I added iMacHome to the names in addition to staff read & write and everyone read and write. But ImacHome(Me) allows read only, options gray, and even though everyone is read and write, it says "You can only read" and I still cannot access Desktop, Documents, etc...
Fortunately I have a SuperDuper user file backup that I am restoring from, so all is not lost. But it seems to me TM backups should be readily available, and I want to solve this problem. I may still want to go back to a previous month to recover something. But mostly I'd just like to know that TM is a functional backup. It certainly isn't in my case right now.
Don't want to migrate the entire home folder. Too risky. Risky enough to bring over Mail and selected Application Support folders and keychains.
Thanks again. I think your answer is right on, but there must still be something else. I know I have those names correct because I see the old computer name on the sparse bundle, and the old home name in the TM backups. (Haven't read the tips yet. Will do so.) -
Can the Time Machine backup drive be Internal?
Does the backup HD for Time Machine HAVE to be an external drive?
I want to install an 2nd internal drive into my 2006 Mac Pro and use that as the Time Machine backup for the main boot/storage drive.
An internal drive would save space and eliminate the extra cables and power supply.Kappy is correct, of course.
But I'd add a strong recommendation that you also do some sort of secondary backups, so if something truly awful happens to your Mac, you don't lose everything.
See Kappy's post on Basic Backup, complete with links to the web sites of each product. -
Restore using Time Machine to new hard drive, but last "full" backup was in 2012. How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?
I entered Iphoto for my user and only photo up until 2012 were in the library. I thought the restore would do the incremental Time Machine backups too.....
Running 10.8.2It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform. -
I have dragged soem of my Time Machine folders into the Trash. Now when I try to empty the Trash it says it cannot empty some of the files because the applicaitons are running.
What can I do to delete them and completely empty the Trash.
NOTE: the Trash is on my iMac, not the Time Machine backup drive.
Thanks!Greetings Dennis,
Time Machine handles file deletion of its backups or you can use the Time Machine window to tell Time Machine to delete specific files: http://support.apple.com/kb/HT1427
Follow the steps here: http://Pondini.org/TM/E6.html
Cheers. -
I delete the time machine in my desktop how can i put it back
I delete the time machine in my desktop how can i put it back?
Hi, please open the 3-bar menu > Customize, and if you can see the Home icon, you can drag it to a location of your choice > Exit Customize to save.
This [https://support.mozilla.org/en-US/kb/how-to-set-the-home-page How to set the home page] article may also be of help.
Hope that resolves your problem. -
After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?
The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Maybe you are looking for
-
Sync with multiple PC. How to cancel some?
After some issues with my PC, which had different versions, I synced my Iphone4 several time, and each time it was identifying a "new" computer (In fact the same) Now I am told that my Iphone 4 is synced with 4 computers (out of a max of 5). My PC wo
-
Poor query performance with BETWEEN
I'm using Oracle Reports 6i. I needed to add Date range parameters (Starting and Ending dates) to a report. I used lexicals in the Where condition to handle the logic. If no dates given, Start_LEX := '/**/' and End_LEX := '/**/' If Start_date given,
-
Trsct CO11N, how to confirm a prod. order withoout confirming activities?
Hello We are using transaction CO11N to confirm production orders Our production orders have several operations. The last one creates the goods movement (control key PP03). In the others operations we have several activities each one with a standard
-
Hello to everybody, i have a problem and i dont understand why. This problem is very popular but all solutions will not work or better i say i dont understand the solutions. I wanted to upgrade my apex to 4.0. At the moment i use Oracle 10g Express E
-
Pdf sent won't open beyond cover sheet? how to allow click thru of all files?
pdf sent won't open beyond cover sheet? how to allow click thru of all files?