I have a Window 8.1 and there's no update for the New Windows 10
Dear Microsoft.
I'm From The Middle East, I have a windows 8.1, and saw that there is a new update in Windows site, I followed by steps to Download it and I examined the updates but I don't have a new update to the Windows 10.
Mahmoud Al-Daher
Dear Microsoft.
I'm From The Middle East, I have a windows 8.1, and saw that there is a new update in Windows site, I followed by steps to Download it and I examined the updates but I don't have a new update to the Windows 10.
Mahmoud Al-Daher
Mahmoud Al-Daher,
Forget about getting Win 10 via Windows Update. You can download the Build 10041 ISO from this Official download site:
http://windows.microsoft.com/en-us/windows/preview-iso-update-1503
Make sure you select the correct bit version, i.e. 32-bit or 64-bit. Language is your choice.
Once you have the ISO downloaded and saved to your computer, you have 2 options :
1. Burn the ISO to a bootable DVD or a USB with at least 4GB of capacity. Then you can use it to do a clean install.
https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
2. You can just go to the location where the ISO file is stored > right
click at it > click Mount > click Setup.exe.
The system will start installing.
After you have build 10041 installed and you have set to Fast ring, you will be offered the latest build 10049.
NOTE : Before you do one of the above, I would suggest that you do NOT install Win 10 TP over your Win 8.1. It would be better if you selected one of the following methods of installing Win 10 TP:
1. Dual boot Win 8.1 and Win 10 TP.
2. Install Win 10 TP on a virtual machine.
The advantage of the above 2 methods is that you have 2 operating systems in your computer. You can choose which one to use any time. If you dislike Win 10 TP, you can simply remove it with couple of clicks. It's that simple to remove, and you have your Win
8.1 like nothing has ever happened.
Similar Messages
-
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
I switched on my PC and there was an update for realplayer. Since then firefox will not open as a window. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.
Hi again,
Helps if I give the correct link ! <br/>The press shift button appears to still work, but the option to start in safe mode from the programs listing of a standard install I do not think exists anymore.
Safe mode will start from a command line, (or a shortcut) and in some circumstances you may need to enter the full path name on a command or shortcut detailed instructions are at http://kb.mozillazine.org/Safe_mode
Remember (at least at this stage) do not make changes when you get the options list, just click on the continue button.
If you think that RealPlayer is causing the problem you could uninstall that for now.
Firefox recent versions are 3.6 4.0 (and 5.0 in beta). There is some debate as to whether creating new profiles or re-installing Firefox is the simplest method of troubleshooting and solving some of these problems, personally I use multiple profiles and multiple versions of Firefox, and tend to forget the required procedures are less than straightforward. For now at least try [[safe mode]] again.
* see also Instructions for [[installing a previous version of firefox]] -
I have a Olympus C-3000 and it won't read in the new iphoto. It reads in my old version on my older computer. Is there a driver I need or something else?
Yes, different computers, different OS's, as stated, does not work on any machine except PPC.
Nothing in console logs. Does not show up in USB under system profiler.
Level 1 tech support. "May be this" or "may be that", but all a waste of time unless someone has the actual camera and can independently verify my results.
If it were just a matter of it happening on one machine that would be one thing. The fact that it only does not work on Intel based machines (and thus Snow Leopard and Lion) it is a pretty good indicator that something is missing in the OS. -
I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the same or I have to download the entire IOS again?
Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes. -
I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??
http://www.apple.com/osx/uptodate/
-
I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this? I just do not want to loose any data. Thank you for your help.
you should always make a backup of data regularly, especially when upgrading to a higher version of OS X. Just because it's free has no bearing on it giving anyone any problems. The only concern you may have is not all older programs will work with 10.9 that do with 10.6. Check here to see if you have any programs that would not run in 10.9: https://tidbits.com/article/12156
-
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling -
I recently updated to version 5.0, however, when I open up a link in a new window, there is no address in the new window's address bar, just a blank box.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?
I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
Ohh I'm excited to update and try! This will greatly help out if it does! -
I have a Mac book pro and I did an update for itunes and now the itunes application won't open t
I have a Mac book pro and I did an update for itunes and now the itunes application won't open
Yes. Check to see if the iTunes application has been moved or renamed before installing it.
(67527) -
Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?
Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?
IIRC the very original Bose Dock had the old 30 pin wiring and was designed initially for the iPod
If you have that version then you will need a converter to the later wiring ( sans firewire) as in Scosche .
and then the 30 pin to lightning Apple adapter
In theory it should work but who knows.
If you have a later one which already works with current devices then just the lightning adapter
It is important to get the genuine Apple adapter I have several and all work fine in several scenarios
Avoid the eBay knock offs most only charge -
Can any one guide me in this. I would like to start my certifications in VM Ware. Especially in cloud. I saw there is an exam for the new starters .(VCA). it is enough or should I go for any other Training in MCSA (Server).
VCA is to make sure that you have a understanding of the general concepts before you go to do a full VCP course.
I have taken the VCA datacenter and it was very much a case of: What product does what?
You wouldnt get a job on merit of having a VCA where as you would with the VCP. -
Help, since downloading i06, the Shopping List app immediately quits when attempting to start a list. There's no update for the app. What do I do next? (I've already removed and downloaded it again.) Any solution?
Help, since downloading i06, the Shopping List app immediately quits when attempting to start a list. There's no update for the app. What do I do next? (I've already removed and downloaded it again.) Any solution?
-
Hi , I just go to a I phone 4s back from repair a new replacement phone. I can't activate my wifi , the wifi button is greyed,so the wifi is unavailable , and I can't update to the new iOS 6.1.3,so what should I do? Pls help me.
Go through the steps in this Apple Support document in order
http://support.apple.com/kb/TS1559
Maybe you are looking for
-
How can I stop iTunes from synching multiple times when I plug in my iPhone
Since the new iTunes 11.1.1 (11) itunes will not stop synching whenever my IPhone is plugged in. I have used Disk Repair to reset permissions several times, and there is always a long list of iTunes items, nothng else. That does not change anything.
-
Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack? I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand
-
Photoshop CS6 does not detect display adapter after upgrading to Windows 8
Hi, I just upgraded my 3 year old Dell XPS 16 which came with a AMD (ATI) Radeon HD 5730 (1GB) graphics card to Windows 8 (along with a new SSD hard drive), and reinstalled CS6, and now I get messages that the program is no longer detecting my dedica
-
Logging in JSP with Appserver Ed. 8
Hi, I've got a JSP with several log levels (from SEVERE to FINEST). In the logs of the application server, I only see the ones from SEVERE to INFO). I've tried to change some log configuration in the admin console (Root, Server, Web Container) but it
-
Add-On works on debugging but disonnects when use ard file
Hi all, I have created a selection on the User Menu "Extract Crystal Report" which calls an .exe file and opens a .rpt file. When I run the code on debugging environment it works fine. However, when I compile the code and use the ard file on SAP, b