I have a working problem, but still need some help

import javax.swing.JOptionPane;
class testing
  public static void main(String args[])
    int firstNum = 0, secondNum = 0;
    int evensTotal = 0, oddsTotal = 0;
    while(firstNum >= secondNum)
      int num = Integer.parseInt(JOptionPane.showInputDialog("Enter a number"));
      if(firstNum == 0) firstNum = num;
      else secondNum = num;
    for(int i = firstNum; i <= secondNum; i++)
      if(i % 2 == 0) evensTotal += i;
      else
        System.out.println("odd number = " + i);
    System.out.println("Even numbers total = " + evensTotal);
    for(int i=firstNum; i<= secondNum; i++)
  if( i % 2 == 0 ) evensTotal=i;
     System.out.println(i+" squared is " + (i*i) );
      for(int i = firstNum; i <= 10; i++)
          if(i % 2 == 0) evensTotal += i;
      else
              oddsTotal += i*i;
    System.out.println("Odd numbers(squared) total = " + oddsTotal);
    System.exit(0);
}I have everything I need, but I don't want it to display the even numbers squared. I want it to display the odd numbers squared. And also at the end I need to Output all of the uppercase letters. Any ideas of what that means or how to go about it??
By the way. The program outputs the following when I use firstNum=1 and secondNum=13:
odd number = 1
odd number = 3
odd number = 5
odd number = 7
odd number = 9
odd number = 11
odd number = 13
Even numbers total = 42
2 squared is 4
4 squared is 16
6 squared is 36
8 squared is 64
10 squared is 100
Odd numbers(squared) total = 165
Edited by: mk9000 on Oct 29, 2008 9:09 PM

import javax.swing.JOptionPane;
class testing
  public static void main(String args[])
    int firstNum = 0, secondNum = 0;
    int evensTotal = 0, oddsTotal = 0;
    while(firstNum >= secondNum)
      int num = Integer.parseInt(JOptionPane.showInputDialog("Enter a number"));
      if(firstNum == 0) firstNum = num;
      else secondNum = num;
    for(int i = firstNum; i <= secondNum; i++)
      if(i % 2 == 0) evensTotal += i;
      else
        System.out.println("odd number = " + i);
    System.out.println("Even numbers total = " + evensTotal);
    for(int i=firstNum; i<= 10; i++)
  if( i % 2 == 0 ) evensTotal+=i;
  else
     System.out.println(i+" squared is " + (i*i) );
      for(int i = firstNum; i <= 10; i++)
          if(i % 2 == 0) evensTotal += i;
      else
              oddsTotal += i*i;
    System.out.println("Odd numbers(squared) total = " + oddsTotal);
    System.exit(0);
}Ok. I figured out how to display the odd numbers squared. I was forgetting to place the else after the if statement. But I still don't understand what my teacher could be talking about when she says "the last step is to output all the uppercase letters"
Any help here? It makes no sense to me. It's all numbers. How could I output any uppercase letters?
Edited by: mk9000 on Oct 30, 2008 5:53 AM

Similar Messages

  • Iphone 3 wont turn on..not sure if it is screen just blank have tried restoring phone but still nothing :( please help

    having trouble with iphone not turning on orsomething wrong with screen have tried restoring and restting it but still nothing??

    This sounds like you have tried the steps I would recommend. You said, "tried restoring and restting it but still nothing??"
    1. When you are done Restoring Firmware, does iTunes show your iPhone's information. If yes then your iPhone is ON and working. Next step is to Reset, like you tried, but do it again, hold both Home and Power buttons until the iPhone restarts, usually less than 15 seconds. If still no screen, hold iPhone in bright light and look at screen, is an image there? If yes, you have a "No Backlight Problem".
    2. If still no image, but you have confirmed iPhone is on with iTunes or switching Vibrate Switch and getting vibration. Then take iPhone to Apple and ask Genius to reconnect the Flex Cable #1 LCD Display Flex to the Logic Board. Before opening and during all repairs it is best if the iPhone 3GS is OFF.

  • I have a big problem, please I need your help

    Hi I was typing a message to send and my laptop off the sending page, and I received a message from Hp allowing me to stop my machine because on a system error. after five minutes I try to re-start my laptop but no way! How could I do as it refuse to start? my laptop is Hp pavillon Entertainment PC) AMD AthlonX2 64 I need your help please very soon

    I'm not suggesting anything. Your options are:
    Start over. It'll take anywhere between a few days and a few months depending on your CD collection
    Go to a CD ripping agency. It'll take a day or two, and they charge about a buck or two a CD.
    Go to a data recovery agency. They charge a few hundred dollars an hour.

  • Hello I have a few questions and I need some help with my iTunes and  iPod

    Hello iTunes people.
    I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
    " The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
    HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
    Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
    I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
    help !!
    PROTEUS

    *What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
    1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
    5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

  • I Know I am in the Wrong Room, but I Need Some Help with an Mpeg 2 File

         Hi, all--
    Forgive me as best you can--I am in a fairly desperate situation. Allow me to explain, and please feel free to contact me at [email protected] if you know a lot about this stuff I'm going to describe.
    We have a project, 29 minutes long. It is a slideshow of paintings with original music by me.
    I live in central Mexico (love it!). However, I was forced to use a video editor who has been a dunce so far. No matter what I ask him for, whether it is a version in a specific format or an edit, I get something different. Every time he has fixed a problem, he has created a new one.
    Now his house was broken into and all of his computers were stolen--I suspect he only has low quality backup files of the project.
    We are in a huge rush, because this is supposed to debut at an arts festival in October, and we need to duplicate a few hundred DVDs first...and now the problem:
    ALL WE HAVE FROM HIM IS AN MPEG2 of the project. The sound won't play on my Mac, but it plays on my friend's PC, so I have to assume that a pro duplication house won't have a problem with the sound if I send him the file on a thumb drive.
    THE PROBLEM WITH THE MPEG2 is that it is jittery when key images slide across the screen. This will look terrible on a 6 x 10' screen at the premiere, plus we do not want to sell DVDs with this unprofessional look.  I asked the editor for an M2V file (requested by the guy who was going to create a menu) and he instead gave me an Mpeg2 that is jittery.
    QUESTION: is there such a program that can take an mpeg 2 and eliminate jitter? I do NOT think I can get another file from the editor.
    CAN ANY OF YOU DO THE WORK IF I SEND YOU THE FILE? I WILL PAY.
    Thanks.
    Doug

    First of all, Hunt--thanks for responding!
    "First, where are you playing the MPEG-2, that you see that jitter?"
    On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
    "Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
    Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
    I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
    Thanks,
    Doug

  • Not really a development question but I need some help

    I install Internet explorer 11 on my pc running windows 7x64 Ultimate, however once installed any site I go to that asks for a user name and password, when I click on the textbox I get NO cursor, if I press tab on my keyboard nothing happens, if I attempt
    to highlight text on a page it does not select anything, does anyone know how to fix this issue, if I use enterprise mode all of the above issues do not happen but god its a headache to try to figure that enterprise mode out, I am only 17 and this is just a
    home pc that I use for homework and gaming and I would like to have the html5 ability but when I cannot use internet explorer 11 for the above reasons then I am stuck down grading to Internet explorer 10... Please Help?

    The IE user forum is at answers.microsoft.com. If you get directed here, the direction is wrong.
    Web developers expect customers's browsers to be in working condition and there is no malware hijacking their web sites. It is like TV show producers expecting viewers to have a working TV.
    Visual C++ MVP

  • About to but PS9 need some help

    Im about to buy
    PS9 and not sure if I should get both the photo and video
    or not.  My main concern is can I install it on more than 1 laptop and have full use on both machines?  Please help ASAP.  THANKS

    Thats what I wanted to know.  I wanted to put i
    t on both my laptop and my partners laptop.  So from what I got out of that we both can get full use from it but we both cant be in PS at the same time?  Thanks again

  • Thanx Noeqplease & Bee jay but I still need some help form U or anyone out

    Answer From Noeqplease
    'Hi Teebow,
    You need to set up a simple pair of transformers, in your audio Layer.
    One transformer will feed MIDI channel 1, and one, MIDI channel 2, in your arrange page, for recording.
    First, create a simple Environment Object, and call it whatever you like (key splitter is good). This is so you can send one midi stream ot both Transformers.
    Cable this to the following two Transformers:
    The first Transformer will FILTER all notes BELOW your set parameter, ie whatever note you decide. This is the TOP of the keyboard split. Hook this up to your first Audio Instrument channel. this would be the melody instrument.
    The second transformer will FILTER all notes ABOVE your set parameter, ie whatever note you decide. this is the BOTTOM of the keyboard split.Hook this up to your second Audio Instrument channel. This would be the Bass instrument.
    In the Arrange Page, create your two instruments, and then select the TRANSFORMERS as the Instruments to be active. In other words, you'll see in the Arrange page "Transformer #1, Transformer #2" instead of the actual instruments. This is so you can record through them, and then the VIs just playback the correct notes.'
    I am not transformer savey However if you or anyone reading this could please send me a pic as to what the settings within the transformer should look like for both channels I would be grateful
    The support I have had thus far on this topic has been more frustrating than help full. One experienced member admits that this is complicated not impossible.
    I know through screen shots that the settings can be shown as this was what I saw in the original post to somebody else which drew me to pose my problem about transformer.
    As before all I need is someone who knows Transformer and is confident in its workings. I have tried but I cannot make head nor tail it would be so much more easier if I could get help with this so then I would have a correct base for getting more confidence with tying other operations.
    Cubase has a logical editor which works the same way I am coming from Cubase 3.1 from the Atari days and still I couldn't get my head around that and this was 1990. no matter how many books I read and believe me I have read quiet a few along with related manuals.
    Are there any books or DVDs on the workings of Transformer or any templates.

    Hi Teebow,
    Here's what you can do:
    Go to your Environment Layer.
    Go to the "Click & Ports" Layer.
    Create 2 new transformer objects, from the menu inside the layer window (not the main menu, but the one inside the window)
    Connect both of these between the INPUT object, and the Sequencer object.
    Now... you need to take out a notepad, and write down some settings.
    On the first transformer, you will make it FILTER out ANY MIDI from channel 2. and pass all else.
    On the second transformer, you will ONLY ALLOW MIDI data coming in from channel 2, and NOT ALLOW anything else to pass.
    Instead of trying to get you a screenshot, please just open the environment and create an EMPTY new Layer, and call it "practise layer" or the like.
    There create some new transformer objects, and FAMILIARIZE yourself with them. then you will be "transformer savvy"
    They are actually very very useful object for dealing and routing MIDI of all sorts. And since you are now needing this, it would behoove you to learn to use this feature of Logic.
    And no, it is not that I do not want to post screenshots, I am actually quite busy, and it would take me longer to have you learn through the forum, than for you to just do it. you need to stop fearing the environment, that's all...
    Cheers

  • BBC iplayer ceased to function, have upgraded Flash plugin but still no success, help please.

    Using Firefox on XP the BBC iplayer no longer functioned so upgraded Flash but iplayer will still not play

    *Regarding Safari:*
    Have you tried repairing permissions & restarting?
    If you have an Intel-based Mac, running Safari in Rosetta can also resolve some QT plug-in issues.
    First quit the app if it’s open & then, in your Applications folder, select Safari & press Command+I.
    In the General area of the Safari Info dialog that appears (click the disclosure triangle if this area is not already expanded), select Open Using Rosetta, & then close the Safari Info dialog.
    Relaunch Safari.
    =============
    If you are using Safari then I suggest that you check out Safari 2.0 Help Webpages aren't working (indicated by boxes with question marks)
    Also try the following:
    Unchecked the java option in the safari security prefrences.
    *Regarding FireFox:*
    Which version of FF are you using?
    See the following thread. It may be helpful.
    http://discussions.apple.com/message.jspa?messageID=5354645#5354645
    Good luck!

  • Getting closer...but still need some advice to fix my router

    This is my third post so disregard this intro if you've read the others. About a year or so ago I bought my WRT45GX with SRX, as well as an adapter with SRX for my PC downstairs. For the first few months it ran fine, with only the occastional strange thing where it would go down and I would usually have to reintall the router to get it to come back up, it did that 1-4 times that day then wouldn't for a long while. More recently I've bought an Xbox Live Wireless Adapter, and a Laptop card with SRX as well.
    My problem recently has been many, randomly without warning or reason my internet connection will pretty much become unuseable, dropping to speeds only rivaled by poor dial up. This can go in spikes or sometimes for hours before it comes back up. Sometimes it just falls out for good and IS unusable, again, for minutes to hours. I have confirmed that it is not my IP as when I hardwire to my computer from my modem it acts as normal as can be.
    I have had my attempts to fix it, in the past few months I've messed with the channel a bit, bought new cables (waste of $40 =( ), been told to do a full router reset by a friends that didn't work, then on these forums I don't even remember the first respounce, but to my second post I was told to add security and change my SSID off of Linksys, which I did.
    Alas, nothing has worked. I do believe I have discovered something that may be of use to you guys though. Recenetly I have discovered the /release and /renew command and first just used it when I get the measage "There is an IP error on your network" once in a blue moon. However, I thought I'd try it when the internet went down, and it popped right back up 0.o Then when I tried it right before posting here it popped right back up as well (from a slow down)
    That could be a temporary fix but doesn't seem to help in the long run, I'm 90% it has something to do with the IPs, hopefully that helps you guys!
    Since everyone always asks, my IP is verison, and I have yet to install the new firmware of my router but if someone thinks it's the problem I will.
    Thanks for your time!! =D

    Well,as you have already tried several settings on the router, you can definitely give a try to upgrade the firmware.
    Try the following settings then,
    Channel -- 1,9 or 11.
    Under "advanced wireless settings"
    Beacon Interval  : 50
    Frag Threshold   : 2306
    RTS  Threshold   : 2307
    You can also update the drivers for the wireless adapter.

  • Thanx Noeqplease but I still need some help form U or anyone out there

    Answer From Noeqplease
    'Hi Teebow,
    You need to set up a simple pair of transformers, in your audio Layer.
    One transformer will feed MIDI channel 1, and one, MIDI channel 2, in your arrange page, for recording.
    First, create a simple Environment Object, and call it whatever you like (key splitter is good). This is so you can send one midi stream ot both Transformers.
    Cable this to the following two Transformers:
    The first Transformer will FILTER all notes BELOW your set parameter, ie whatever note you decide. This is the TOP of the keyboard split. Hook this up to your first Audio Instrument channel. this would be the melody instrument.
    The second transformer will FILTER all notes ABOVE your set parameter, ie whatever note you decide. this is the BOTTOM of the keyboard split.Hook this up to your second Audio Instrument channel. This would be the Bass instrument.
    In the Arrange Page, create your two instruments, and then select the TRANSFORMERS as the Instruments to be active. In other words, you'll see in the Arrange page "Transformer #1, Transformer #2" instead of the actual instruments. This is so you can record through them, and then the VIs just playback the correct notes.
    Cheers '
    I am not transformer savey However if you or anyone reading this could please send me a pic as to what the settings within this beast should look like for both channels so that I can click an go thanx

    Logic can only show the parameters for one object at a time (the selected object) so a screenshot will do you no good, as it can't show all the parameters at once.
    Have you tried working through this? Or did you just not understand it without trying? The instructions, while not explicit, are clear enough in principle. Work through it, and if there is anything you don't understand, post back for clarification. That way you might just become a little more environment savvy...

  • Common problems but i need some clarifications

    I am using
    MSI P45 NEO FR
    P4 3ghz CPU
    500W 80+ powersupply
    4g ram
    HD 4850 PCS+ graphics card
    Same as others DCC problem. Alarms goes off.
    It shows SYSTEM 2 at 957 RPM, red and blinking. WhAT'S A SYSTEM 2 means? Fan?
    FSB red, but not blinking, i think 500MHZ?
    What are those thing? I really know nothing about them and how do i solve the problem?
    Chipset fan is a.ka. CPU fan?

    Quote from: idrinkecoke on 26-August-08, 09:59:16
    Same as others DCC problem. Alarms goes off.
    It shows SYSTEM 2 at 957 RPM, red and blinking. WhAT'S A SYSTEM 2 means? Fan?
    That is actually not a problem.  Just for your information:
    https://forum-en.msi.com/index.php?topic=119221.msg899889#msg899889

  • Would Like to Get an IPod but I Need Some Help

    Hey-
    I tried an iPod (2 that is) when the first ones came out, and I broke them from installing the software when it was already installed. (at least that is what I was told). But it said to begin by installing the provided software.) I still see how far they have come so I am here wanting any advice on what is available and what some iPod- experts would recommend for someone who has a hard time with technology stuff like this. (Plus the good am/FM radios to use while exercising are getting to be nearly nonexistent.)
    I have done some serious reading up on them and have looked up some of the iPod Manuals that people write to help the less "commonsense" people like myself.
    I am really interested in the iPod classic since it seems to have the least of what I really do not want like videos (which it might have) more basic controls are a plus, and the ability to set it up so I can upload the music in iTunes.
    I hope somebody or several people have some recommendations, things to help me that I would not think of, if the earplugs are not the best for exercising, do you know of a brand that is?
    Any pointers learned from experience and places to go to help me understand what it is when I actually do get one, etc.
    I really appreciate any help in this broad area, even if you think my post is lame So, in advance--THANKS!

    HI! Just read your post and the reply by roaminggnome and I would say he gives you all the information you need to know except for what color you like.
    I likely know less than you even do regarding the iPod but, that said, I have owned four of them. However, all bought within the last 18 months. So, I do not know of what it used to be like before then. All I can say is that I am a PC guy so Apple stuff didn't really catch my attention until I started listening the Rush Limbaugh to get the news about politics that the press seems to think is too much for us or something. I didn't really have three hours a day during the time he is on so I then heard about "podcasts." I found that I could listen to him anytime I wanted to if I just downloaded the podcasts he had of his show each day. So, I backed into the iPod or MP3 player rather than looked for one because they were a new item. I am now 59 years old and have been using computers since 1965 and I got out of the "Its new so I have to own the best and the latest" thing in my 40's. Now, having grown up, I buy what I really want because it will actually improve my life somehow, rather than just to show off.
    The point being that I had become somewhat "hardware illiterate" but when my son came home from doing 5 years in the Army - doing war stuff, and we got to know each other again, I realized that my son had become me when I was his age. He had +it all+ five times over. (The pay is much better than when I was in!) He had iPods, iPhones, etc. all over the place but, like I said, until I needed something to listen to Rush, I didn't even ask about it.
    So, when I finally got one, I really knew nothing! I had to read the directions (I am a CPA so I know how to do that.) to find out what to do. I think I remember that things had to be done in a certain order so read the directions. Sorry if what I am remembering is the directions to something else. But I found that reading the directions sure saves me a lot of work anyway - especially in the computer software area. I found the directions easy and had no problems whatsoever. In that way, roaminggnome is quite correct. It is so automatic that even a cave man could do it. Seriously. Learning iTunes seems harder to me than the iPod thing, however. Reading some of the iPod stuff on the net (a book is not included except for setting it up but running it requires going online.) is quite worth it when trying to use it the way you like.
    The iTunes Store is where I get the free podcasts and found that lots of shows have them - especially political venues. However, you can buy almost anything you want to listen to from their store. It was a fabulously ingenious thing to create because it all works so well together (great marketing idea) (Store, Podcasts, and iPod) and they make money almost every step of the way. Its like an addiction after a while anyway. I need another song, I need another song, I'd do anything to get a podcast of the guy I just heard on the radio! And like that.
    It all works quite easily and is about as hard as turning on your computer and plugging your iPod into the special cord they provide with it - which is always plugged into a USB Port on my computer. Plugging it in starts up iTunes and, depending on how you set it up in iTunes, it begins to upload to your device automatically (My son bought me the classic for Christmas last year and I always use that one now,) So, all you have to do each day, once it is set up, is to plug it in and walk away. It will load up your choices and charge the battery after that. Of course, you already know all that don't you?
    I use my iPod when I work out. I do that twice a day for about a total of three hours at least five times a week. I am in remission from a terminal disease so I want to be in the best shape possible for when I end up with cancer to try and make it through the treatments. Being 59 and seeing how the government is going to trash our health care just so he can cover millions of illegals and after reading the entire House bills with addendums, I know that my chances of getting a liver now is absolutely nil. There is no use keeping an old guy alive who can add nothing to the greater good, right? At least that is what Robert Reich (A Clinton appointee) who advises Obama said. "If you are in your 80's, we aren't going to waste medicine on you just so you can last a few more months. We're going to let you die." I appreciate honesty even when it doesn't go my way. At least I know what I am up against now. But the reality is, in a socialist environment, I will be a liability - a toxic asset and will be thrown out like yesterday's news. The country I once put my life on the line for - voluntarily - thinks of me as a problem now. The greatness of the individual and the American dream had died now and after being able to experience actual freedom in the 50's and 60's, having it taken away from me has left me so I do not really care about dieing anymore. I would rather die free than live in chains. If China wants to, they will literally own us if they do now cut Obama's nightmare borrowing and spending off quick. (Did you know that Obama is counting a raise as a new saved or created job?) Who the **** let him get away with such a phony number without learning to quantify how he gets to these numbers anyway? Talk about pulling numbers out of thin air!) The press would have NO idea how he gets these numbers, they just print it. We now have an affirmative action president who is too big to fail. And kids are now forced to learn Obama praise songs in schools. They can't read or write but they can chant Obama rap in over 20 different schools (See breitbarttv.com for proof. They did the exposes on the Acorn criminal business - of which have been incorporated under 300 different business names but are all Acorn and SEIU and share the same offices many times. This is a nightmare akin to the way Hitler took control of the citizens. He started by owning their bodies because of "health care." Once they own your health - they own you!) It lead to him declaring Jews unfit to live and that is the excuse he used for euthenasia of the old, sick, and Jew alike. He wanted to create the perfect German. That is what can happen if you sell out your personal freedoms for a thing you may hardly need for most of your life - health care. You can pay for your own before you are 50 for the most part and get catastrophic insurance for those kinds of sicknesses, like mine, that most people never even get until their 80's, if at all, and be far ahead financially. Getting old is not a sickness. It is a wearing out. Are old people worthless because they finally wore out living life and paying taxes in American now? Sick! But instead of free insurance, like these young kids foolishly think they are going to get will cost anyone who has a job, it costs actual money and they will be forced to buy this crappy insurance since all private insurances will go broke trying to compete with an entire government that does not have to make a profit because they can tax us for all the money they need (Once unconstitutional and some of this still is.)
    Anyway, now that I learned from roaminggnome about the disk drive being located in my iPod rather than just a flash drive, I will start to use my old 2 gig one for working out. Mine is the 120 gig size and I hardly use any of it except for a few TV shows I missed (Yes it has a screen) and music and podcasts to listen to while I work out. I use about 3 or 3.5 gigs of the 120 possible.
    One thing that roaminggnoe said about the earlier ones is that my 2 gig says it can allow me to use the drive as another one on my computer or something like that. So that puzzles me.
    I have to mention about the ear buds though. The ones that come with it do not have a better sound than ones you can buy. However the ones that come with it are best for working out if you use the bud type rather than the earphone type I see some using at the club, The ones that come with it allow air to get into your ear which keeps the buds dry from sweat. The ear buds that you can buy that have better sound allow your ear canal to fill up with sweat so listening to music or whatever is like listening to it under water! No kidding! I had to take them out while one the orbital machine and try and dry my ears out while jumping up and down on that machine without falling off. The Apple buds stay dry and you can still hear others around you that might be trying to get your attention there.
    Anyway, sorry I wasted so much of your time. I just wanted to assure you that even one so uninformed as I could use the new iPods, right out of the box I think it is great and I am glad I now know how to use it. I just wish I could learn how to download the podcasts in the order done on the air of shows longer than one hour. Each podcast is one hour and they always download in the wrong order - completely backwards from how they played the show. I also wish I could have it automatically play them in order instead of having to stop and select each one each hour. The music shuffles, why not the podcasts? I do find that a bit strange. Oh well, you've likely already made the purchase so you can just delete this rather than to waste your time reading it.
    Have a great day! (Don't you just hate hearing that? Especially in stores where you know they don't mean a word of it.) I have been kidding you about making this so long. I did most of it for a lark (talk about too much time on one's hands huh?)but I did mean to let you know about my using the iPod with no problems. roaminggnome said everything I did in a few sentences. Good writing.

  • Beaten to death I know - but I need some help with Gtalk

    Hello all,
    So I am 100% certain that the topic of Gtalk and the ability to communicate to buddies on other IM servers has been just flat out abused by now. With that said - I've been driving myself completely crazy trying to set this darn thing up correctly, not to mention the tremendous amounts of time that I've blown.
    So...... before I continue to waste away more time & patience - I want to put in my own words what I am trying to accomplish, check with you peeps and see where I need to go from here to fill in the blanks.
    Here we go: I have been using iChat that is set up with my Google talk "Jabber" account and it works great as long as your entire world of people you'd like to chat with are also using Gtalk. My problem has been that many of my friends & family have hotmail or yahoo, I am completely unable to chat with them, as when I try to put in the needed info I get the infamous "waiting for authorization" (if only a snickers bar came with that).
    I would like to be able to use my GTalk account and chat with friends using Yahoo or Hotmail - using iChat as my way of doing so.
    I've already attempted (likely unsuccessfully) the whole Psi thing, heck I've created who knows how many different accounts and can only hope that I've accomplished fully deleting most of them. Quite honestly I'm just not able to put the Psi thing together correctly, or at least in such a way that will allow me to continue using Gtalk + the ability to chat with those using Yahoo or Hotmail.
    If anyone could offer some explicit info on
    a) can this be done (easily would be great), or am I truly just wasting time...
    b) maybe point me to a website(s) that is(are) designed along the lines of "iChat & IM for dummies guide"
    Hope that makes some sense.......
    Thanx in advance!
    -A-

    iChat for Dummies link
    http://www.ralphjohnsuk.dsl.pipex.com/page5.html#_jabber
    See the three links in the Jabber section
    Now it was certainly the case that you could set up Transports on other server and your Jabber ID that was logged in would see that an use it even if you were not logged into that particular server. (So using GoogleTalk would see MSN Buddies effectively)
    I am not quite so sure that this is the case now. I rarely use the Jabber side myself as I have always had some Buddies showing as Not Authorised and Awaiting Authorisation even If I have chatted to them.
    I have found that some of the Jabber servers I originally used have stopped MSN and other transports which does not help.
    I have found I have had to check by using Psi that a transport is still active.
    In the table of poeple willing to test http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html I regard Gil Taylor as the most knowledgable about things Jabber.
    He has not been able to post here as frequently as he did due to other commitments but try AIM texting him first.
    This may not be the answer you wanted but may help moving on.
    5:05 PM Saturday; November 10, 2007

  • Still need some help.. Please!

    I´ve tried to do the tree component transparent so that
    I can see the background thru it but it doesn´t seem to work.
    Do any one know how to do??

    cSource3D=thisComp.layer("Light"); //reference a 3D light as source
    cSource2D=cSource3D.toComp([0,0,0]); //convert to screen coordinates
    cMiddleX=thisComp.width*0.5; //midpoint X
    cMiddleY=thisComp.height*0.5; //midpoint Y
    cDiffX=cSource2D[0]-cMiddleX; //position difference X
    cDiffY=cSource2D[1]-cMiddleY; //position difference Y
    cAngle=Math.atan2(cDiffY,cDiffX); //find angle
    cOffset=200; //distance from middle
    X=cMiddleX+Math.sin(cAngle)*cOffset;
    Y=cMiddleY+Math.cos(cAngle)*cOffset;
    [X,Y]
    Yes, simply copy&paste the above code ( I corrected the typos) to your secondary element and adjust the cOffset variable to suit (you could tie it to a slider, if needed; negative values move in opposite direction). Make sure to adjust the reference to the light in your comp (or your 3D Null). If you use an expression Point control or the Lensflare effect on a solid, you don't need the first line and the second line would then look something like that:
    cSource2D=thisComp.layer("Lensflare").effect("Lens Flare")("Flare Center")
    Mylenium

Maybe you are looking for