I have an iPhone 5S, with iOS 8.1.2 I am trying to do a system restore but the message I get on the desktop is that there is not enough room on the iPhone. How much room is required?
I have an iPhone 5S, with iOS 8.1.2 I am trying to do a system restore but the message I get on the desktop is that there is not enough room on the iPhone. How much room is required?
I had an important app. (Memos by bluemarblesoftware.com) that I accidentally deleted. It of course had many memos, some with quite a lot of information. I did sync my phone on a regular basis and I think the memos should be on the desktop computer. I tried to do a restore function but I got a message saying there was not enough room on the iPhone. How much room is needed?
generally you need 1.90gb
what you can do is back up your phone to your computer before doing the update, just as a precaution.
Similar Messages
-
I am nearly out of iCloud storage but I have over 3 gb on my iPad. I just bought a game that requires 1.5 gb but will not download to my iPad because it says that there's not enough storage in the cloud. Why can't I just download the game to my iPad?
That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support
-
There obviously IS enough free space, yet somehow iTunes seems to think there isn't.
What do I do? Did somebody have this problem before?
Tried restarting, switching on and off, nothing workedUnfortunately that's not the case.
I didn't confuse it with my iCloud storage. I'm talking specifically about the storage ON my iPhone.
When syncing the diagram on the bottom of the page (you know the coloured one that gives you Audio, Photos, Apps...) shows me that I have more than 20GB of remaining space.
And I'm trying to get audio on it which is definitely LESS than 20 GB. So it should fit.
But it still gives me the error message that the data I'm trying to sync to my phone is too large -
The message displayed in the Force Quit Applications window says "Your Mac OS X startup disk has no more space available for application memory. The only applications that I have open are Safari and Finder and I am simply reading a discussion board.
It would appear that this error can be caused by an excessive system demand for swap space that exceeds the maximum allocation. Just try restarting the computer.
I found a possible solution for finding the cause of the error. Open Activity Monitor. Be sure you have the Real Memory column showing and the Processes dropdown menu set to All Processes. Select the Real Mem column and sort in descending order. Leave Activity Monitor open. The next time the error appears the application at the top of the column is the one causing the error. -
My family member's iPhone recently erased all of its contact information, with no action taken by my family member. She is trying to use the restore backup function to recover her contacts.
The restore backup functions says that there is not enough space on my iPhone to restore backup. How do I fix this/how do I know how much space I need to complete this backup?
We have removed the majority of pictures from her phone, and she has 4.1 GB of memory free.
Thank you!You need at least as much space as you have used on the iPod. Could be as much as 64 GB but is probably much less.
Find a way to delete what you do not need on the computer. Start by emptying the Recycle Bin.
This may be applicable: iOS: 'Not enough free space' alert when trying to sync -
Write: 0xecf6eb0, 4096: There is not enough space on the disk.
Our applications occasionally get the error in the function specified by set_errcall: "[prefix] write: 0xecf6eb0, 4096: There is not enough space on the disk. " Preceded by "DB00.db: write failed for page"
There most certainly is enough space on disk for one. In this most recent case, the Db::put's succeeded for a full hour before finally failing with an out of space error. At which point, I now have 30 log files and my own log files are filled with Berkeley error callbacks.
How come the set_errcall doesn't return an integer error code? If it did, we would be able to analyze that and decide any action to take. In this example, I might consider closing down all handles and checkpointing then removing logs since maybe the number of logs has gotten to large. Analyzing a string doesn't make sense since that might change with Berkeley versions.
Anyway, can anyone give any advice as to why we would get an out of space error (with plenty of disk space.) And also how to handle such an error.
Edited by: AMARCIONEK on Jun 3, 2009 10:10 AMThe platform is C++ API version 4.7.25 running on Windows Server 2003 Enterprise SP2. The database is on an NTFS disk. We have tested database files up to 20GB in size. The following is my config.
m_pDbEnvironment->set_cachesize(0, 10 * 1024 * 1024, 1);
m_pDbEnvironment->set_lg_max(20000000);
m_pDbEnvironment->set_lg_bsize(10 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_write(4, 0);
m_pDbEnvironment->set_mp_mmapsize(2 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_openfd(1);
// set the alloc methods into the environment
m_pDbEnvironment->set_alloc(QPRT_ALLOC, QPRT_REALLOC, QPRT_FREE);
m_pDbEnvironment->set_lk_detect(DB_LOCK_YOUNGEST);
m_pDbEnvironment->set_timeout(500000, DB_SET_LOCK_TIMEOUT);
m_pDbEnvironment->set_timeout(200000, DB_SET_TXN_TIMEOUT);
m_pDbEnvironment->set_flags(DB_REGION_INIT, 1);
m_pDbEnvironment->set_tx_max(5000);
m_pDbEnvironment->set_flags(DB_TXN_WRITE_NOSYNC, 1);
m_pDbEnvironment->log_set_config(DB_LOG_ZERO, 1);
m_pDbEnvironment->set_lk_max_lockers(5000);
m_pDbEnvironment->set_lk_max_locks(5000);
m_pDbEnvironment->set_lk_max_objects(5000);
m_pDbEnvironment->open((zKSz)sPath, DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
DB_THREAD | DB_INIT_TXN | DB_RECOVER | DB_LOCKDOWN,
0);
We also checkpoint every 2 to 5 minutes with a 5MB threshold. We also explicitly call pDbEnvironment->log_archive(kpNil, DB_ARCH_REMOVE) after checkpointing.
Primary and (up to 4) secondary databases are opened with DB_CREATE | DB_AUTO_COMMIT flags.
I'd also appreciate any suggestions as to how to lower the memory footprint used by Berkeley. Ever since we've integrated this DB, our memory usage has been too large and inconsistent. There are 6 independent environments the product uses during runtime. Each of these environments have a primary database and (up to 4) secondary databases, which are all opened with DB_CREATE | DB_AUTO_COMMIT flags.
Just recently we have added a memp_trickle every 5 seconds at 40% (Anything lower and it has no affect in the environment, in other words, db_stat shows dirty pages forced from the cached instead of trickled.) We are trying to reproduce this issue at this point. -
Have a new computer with Win 7 and a new compatible motherboard and a WD 3 Terabyte HDD. itunes keeps saying that there is not enough room after 736mb??? the drive is formated and properties says it has the full 2789. Why won't itunes see it???
What specifically is being done/attempted when the message appears?
-
i have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can get my money back
Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
http://support.apple.com/kb/ht2519
Download to your computer and then sync to your iPod touch whatever will fit.
And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted. -
I am trying to sync an ipod touch 4TH gen. The capacity bar at the bottom shows I am adding 22.29g with 6.5 g free. Yet every time I try to sync it warns that there is not enough room an additional 868.9m is still needed. Does the capacity bar tend to be wrong or am I missing something?
Well when all else fails do a restore! This fixed my problem. Still don't know why the content bar differed, but what the hey!
-
I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?
Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down. -
My iPhone 4 says that there is not enough memory to download apps like Facebook and Instagram. When plugged into iTunes it says that >4GB is filled with "other". How do I clear the "other"? What is this?
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116 -
When i sync my iphone it says that there is not enough room in my itunes library what do I do?
When I try to sync my iPhone with iTunes, it says that there is not enough room in my itunes library for my phone to sync. Why is this? Do I need to delete stuff off my library? Or is my laptop too full? Or is it that my phone hasn't got enough space? ...Or something else?
Why is this so difficult to figure out?
The message is quite clear. The size of the iTunes library is larger than the space available on the device.
Stop attempting to sync the entire library to the device.
Select the desired content to sync to the device.
Sync. -
I recently ran into a problem with syncing my ipod touch to itunes on my Windows 7 pc. It had previously been synced to my older laptop
and I wanted to change to my newer Windows 7 laptop's itunes library that I had already been syncing with.
Anyway, I started seeing this message that prevents my from syncing:
The iPod "Bill's iPod" cannot be synced because there is not enough free space to hold all of the items in the iTunes library
(additional 2.48 GB required)
Not sure if it is talking about my iPod free space or my PC itunes library free space. Either way I have 11.0 GB free space available
on my iPod and 412 GB free space available on my Windows 7 PC.
How do I handle this problem? Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ThanksIt is saying that the iPod does not have enough free storage to sync all the items yu have selected to sync to the iPod. You need 2.48 GB more free on the iPod. You need either to select less to sync or delete some content form the iPod.
-
I try to download an app and it tells me that there is not enough room when there is plenty
An app that is 1.9 GB is saying that there is not enough room to download, even though i have around 3 GB free.
The GB size of the download file is the compressed size (like .zip or .dmg). When the file is installed/uncompressed it can be 2-3 times larger.
You need to delete some files and not run with an almost full storage.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.
I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.
Maybe you are looking for
-
Recommendations for good mouse pad for new Magic Mouse?
Hi, I have several mouse pads with a microfiber, but my new Magic Mouse doesn't operate smoothly on them. Sometimes it hangs up, or is slower to move than at other times. I tried an expensive one made of coated glass, but the noise of the Magic Mouse
-
Hi I see a good price in the nokia E52 and I wish guys to tell me is it a good phone to use and is there any kind of factory defect in software and Bluetooth and wlan please tell me every thing about this phone even if the problem is small tell me pl
-
Which tcode will allow me to see 0cust_sales hierachy on R3 as on BW?
Hi, I have a hierarchy, 0Cust_Sales in BW, and want to see how it looks like on R3, what tcode is used for that? Or, while in R3, from the SAP Menu in R3, can you provide me with the steps to see the hierarchy? Thanks
-
Best way to keep imac and mac book in sync?
I have an imac g5 and a macbook. I have made the initial transfer of all files from the desktop to the laptop. What is the best way to keep the two in sync, such as iTunes, iPhoto, etc? I'm sure this is a stupid question, but I need help!! Thanks in
-
How to route the file, base on the file name without touching file content?
Hi All, can you please provide me solution how to route the file based on file name with out touching file content. Business criteria : > One source directory having zip files with different file names > File adapter have to pick the zip files and ha