I have an NI5911 high speed digitizer and would like to acquire a video signal from a CCD using it. Does anyone know if this is possible without buying any more hardware please? If it is, how would I go about it?

The only thing I succeeded in finding on the NI site was about using a different high-speed digitizer in tandem with an IMAQ card but I was hoping not to have to buy an IMAQ card as it means I may as well not have got the NI5911 (a while ago) in the first place. Any help would be greatly appreciated!

You can certainly acquire video signals with the 5911. The only tricky part is that the 5911 does not have any video triggering options. That means that you will have to either find a way to provide your own trigger based on the video signal (that's where the IMAQ board comes into play) or you can just take a lot of data and keep only the data you need once it is in software. For instance, you could take one large record and then use software analysis to determine where the frame sync occurs. Hopefully this was helpful.

Similar Messages

I saw a post on how to load iMovie 6 without deleting iMovie 9 or iLife 11 I can't find the post now does anyone know if this is possible. I do not want risk not being able to reload iMovie 9 it appears that I would have to reload the whole iLife suit

I saw a post on how to load iMovie 6 without deleting iMovie 9 or iLife 11 I can't find the post now does anyone know if this is possible. I do not want risk not being able to reload iMovie 9 it appears that I would have to reload the whole iLife suit

Could have been mine!
Happily this is easily achieved, but it has to be done backwards.
Delete iMovie 9 (just drag it to the trash). Now install iMovie 6 from the iLife 6 install disks.
Now re-install iMovie 9. This automatically moves iMovie 6 into a folder it creates in your Applications folder called iMovie Previous Version.
Now you have them both, and you can have both in the Dock as well.
Alternatively you could try this method, suggested by poster Uitech:
Open a terminal and type "touch /Library/Preferences/com.apple.iLife08.plist"
(No quotes)
Install iMovieHD6 from the iLife 6 install disk.
This works with both Leopard and Snow Leopard Macs.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options!!!

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

I would like to install snow leopard instead of lion on latest macbook pro MD318 (oct.2011) Does anyone know if this is possible? If so, will I have to use install-disks of previous model (eg. MC721) or will retail-disks serve?

Experiencing serious problems with lion, I would like to install snow leopard instead of lion on latest macbook pro MD318 (oct.2011) Does anyone know if this is possible? If so, please tell me how. Will I have to use install-disks of previous model (eg. MC721) ? Or will retail-disks serve?
Thanks steph

Snow Leopard is currently running on this MBP 15", late 2011 model, due to my need to run an old version of FileMaker.
A retail disk with 10.6.3 did not work, I restored my previous Snow Leopard install with Disk Utility.
However, it is not the shipped software and is not officially supported on this Mac. Therefore, your advice to troubleshoot Lion is the best option.

Have my exchange contacts appear on iCloud. Does anyone know if this is possible?

Hi there,
Just setup iCloud on my IOS 5 iPhone 4S. Loving it so far. One thing I have been unable to do is have my exchange contacts / calendar also appear on iCloud. Does anyone know if this is possible?

Fair point Tim
I can't speak for the O/P but for me, i think i'd be happy to "move" then to iCloud rather than Exchange then. This all started from the most trival of things. I wanted Suri to recognise my partner but the "Related People" fields are limited to 3 with Exchange. I need them to be iCloud contacts to get the full list including Brother, Father etc etc
I have follows online guuides to sync to the cloud but they ignore Exchange contacts. I have just tried to add the @me.com account to my Outlook but it failed (perhaps servers busy/down?)
and to answer your question this is a High end HP desktop with Outlook 2010 and Exchange 2007 SP3 connected on a gigabit lan.
I'm assuming that when i get my mobile.me account into Outlook, i can just copy/move them into there and then the sync process will work.?

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

HT3702 I am currently being billed a monthly charge from iTunes for Pandora ($3.99) but would like to switch to the annual billing rate of $36. Does anyone know how this is done? Thanks for your help.

I am currently being billed a monthly charge from iTunes for my Pandora subscription ($3.99/mo) but would like to change to the annual rate offered by Pandora which is $36. I don't see where that change can be made through the iTunes Store. Any ideas? Thanks.
A

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

HT3275 Time machine cannot backup due to "The backup disk image "/Volume/Data/Dave's Macbook Pro."sparse bundle" is already in use." Does anyone know what this means and how to fix it??

My time machine is sending me a message; "The backup disk image "/Volume/Data/Dave's Macbook Pro "sparse bundle" is already in use". As a result, the time machine cannot complete a backup. Any suggestions?

Look at the more like this column on the right.. this is the most common problem reported here.
You need to restart the TC.. that is all..
Pull out the power cord.. count to 10.. plug in power cord.
There are a few occasions where this fails.. see C12 http://pondini.org/TM/Troubleshooting.html

HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

You can't buy the part from Creative as a spare.
I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this.

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

I have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

i have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

sorry all - disregard I've identified the issue in the language settings with one set to 'English - United States' and one to 'English - United Kingdom' - now fixed.
Cheers

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Sorry i correct myself i had been an iPhone user for about 3 years. My last Apple iPhone was an iPhone 5. I am getting used to things with the Samsung but really think the extra features such as smart stay and scroll are coverting humans into robots. The configuration of the features is also difficult as it detects your eye movement so if the movement is out of place even the slightest the feature will not function. I think the ios user interface is simple in comparison to the android user interface. Any views are appreciated? I have many friends also using HTC and prefer it in comparison to the iPhone and Galaxy but as raymond73 mentioned choice is a wonderful thing.

I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?

I have a 21" iMac that only boots as far as a folder icon with a question mark in it. Anyone know what this means and how to fix it?

It usually means your OS has corrupted files. You need to reinstall OS X.
If you are using Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you are using Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

I have an NI5911 high speed digitizer and would like to acquire a video signal from a CCD using it. Does anyone know if this is possible without buying any more hardware please? If it is, how would I go about it?

Similar Messages

Maybe you are looking for