I have been using a Time Capsule as my modem and back up for the last 6 months, suddenly it has started flashing amber light. I have tried resetting, soft and hard, but no success. On reset, the message is that it does not have access to internet.

I have tried resetting, following instructions on Apple support.
2 amber lights are showing, saying no internet, and no dns servers.
On the same network I have direct link to TV, working fine.
The TC does not seem to be able to pick up IP address even though directly connected with Ethernet cable.
I'd appreciate any help possible.

So what kind of modem is it.. is it cable.. if so you need to power it down and leave it off for 30min or so .. maybe shorter or longer depending on the ISP.
Do a full factory reset on the TC.
The Factory Reset TC Gen1-4. Or AE Gen1-5
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Plug into the TC by ethernet from computer and setup as router .. ie dhcp and nat.. if it fails please give info on the firmware of the TC and the actual modem model number.

Similar Messages

  • HT204023 I've been using my personal hotspot between my iPhone and iPad, but I don't believe I've changed anything with my phone contract, will I be charged on my next bill?

    I've been using my personal hotspot between my iPhone and iPad, but I don't believe I've changed anything with my phone contract, will I be charged on my next bill?

    Depends on whether your carrier supports Personal Hotspot & how/if they charge for this feature. Some carriers include Personal Hotspot as part of your data plan, some require it be provisioned on your account. Contact your carrier & see what their requirements are. The fact that you have the Personal Hotspot setting indicates your carrier supports this feature.

  • I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
    If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
    If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
    If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
    If you are asking if this is OK, the answer for most folks would be "no".
    Can you clarify if this is what you are asking?

  • I keep getting the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below Is this a serious problem?

    My daughter and i use same computer she uses firefox and recently we have noticed on facebook apps we get the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router

    Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!

    Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way -  we also need the types of devices involved and how they are attached - kind of like a nework map  - the more info that you provide, the more answers you will get.
    Regards,
    Charlie    -

  • HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

    I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

    You cannot transfer from the iPhone to the computer.
    You must move the contents of your old computer to the new one directly.
    Use an external hard drive perhaps or restore your old computer backup to your new computer.
    The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

  • Value Misc. Allowance for the flexfield segment Expense Type does not exist

    Dear All,
    can any budy help me out in Internet Expense modulee
    Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
    Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
    Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
    can you please tell me why this is happining and what is the solution.
    Regard
    Ajay Sharma

    Check these things
    1. you have enable PerPeriodOfService DFF to this set.
    2. you are setting Context Variable like (AttributeCategory) with requried value.
    Thanks

  • " ID Generic for the flexfield segment Address Style does not exist"

    "ID Generic for the flexfield segment Address Style does not exist in the Value set $Flex$DF_contexts"
    Can some one help with this iRecruitment issue.

    Just enable the context for the other countries within the definition of the address flexfield. You should then get a drop down list of countries, select it and then the flexfield definition of the address will refresh according to your selection.
    Check that the original definition of the address flexfield on the personalisation page includes all the other contexts.
    Regards
    Tim

  • HT1218 What fix works for 'the backup disk image X could not be accessed (error-1)?

    Our backup fails every time and leaves the message: The backup disk image "X" could not be accessed (error -1).
    The Mac Help options all look like solutions to other problems.
    How do you fix this?

    Reboot the Time Capsule.

  • A file or device required for the operation of Sound 1 does not exist or is used by another process, or you have no permission to access it. The virtual machine will continue running, but the device will be disconnected.

    I encounter this error using OSX version 10.8.2 running Parallels Desktop 8 For Mac (Build 8.0.18345 Revisiopn 820589, November 25, 2012) runing a MacBook Pro using a Thunderbolt Display.
    The Thunderbolt Display Sound does not function when Parallels Deskop is running

    cherholdt wrote:
    I encounter this error using OSX version 10.8.2 running Parallels Desktop 8
    Then you should probably post your question on the Parallels forums:  http://forums.parallels.com

  • Hi can I use Time Capsule 4th generation as a back up at the same time between my iMac and HP PC

    HI Just bought a 4th generation Time Capsule and after a bit of trouble, I was able to do the following...
    1. Connect TC to my modem via ethernet cable
    2. Set up my first time Machine from my iMac to Time Capsule
    3. Set up my HP PC via ethernet cable to Time Capsule
    4. Set up HP Printer Scanner to USB port in Time Capsule, can now print from my PC and iMac using the same printer.
    Here is the question...
    Can I use Time Capsule (2TB version, not that this should matter, I think) as an external back up for my HP PC, running Windows 7?
    I asked this question at Apple Store and they said YES, now I have my doubts as I cannot see Time Capsule as an external drive when I check my PC and computer part there, can see my C drive, D drive (internal backup drive in my PC), E drive (DVD drive) and that is it.
    Installed AirPort utility for Windows, have version 5.5 something. I can see TIme Capsule using this at my PC but can I somehow save my HardDrive to Time Capsule, even manually?
    Or is the problem that as I started Time Capsule with Time Machine Backup first, it has formatted Time Capsule to support only Apple version, and this is why I cannot see Time Capsule as an external harddrive?
    Any help would be appreciated!
    I have already an external HD for my Windows PC, just thought this way I could potentially have all the data in one place and also able to use 1 printer...
    Many Thanks

    Remember Apple Names are not fully SMB compatible..
    Reset the TC and do the setup with all SMB naming.. ie.. short, no spaces, pure alphanumeric.
    That means TC name eg TC
    Wireless name (different for 5ghz) eg TC24ghz and TC5ghz
    And hard disk share name.. eg Data
    Make sure all passwords also match that convention.. but you can use more characters.. up to 20 or more if you are paranoid. Pure alphanumeric though.
    In the file sharing area. set the right workgroup. And it makes life easier turning on the guest account to read and write.
    Then in windows explorer simply type
    \\TCname or \\TCIPaddress .. obviously you change the names with the actual name or IP.

  • Can i use my time capsule as wireless storage and not as a router too?

    hi there i just bought my self a time capsule its a 500gb one as i do not need the 1tb+ storage.
    i play a lot of online games and have a fast router so i do not want the time capsule for its router capabilitys i only want to use it as a wireless storage unit is this possible to do?
    if not i can connect a usb storage to my current router and use that as my wireless storage if so where is the best place to sell this time capsule?

    You simply bridge the TC and plug it into the existing router.. it will then provide network storage..
    Can connect either via the existing router or the TC.. if you set up wireless correctly.. if it is a gen1 you can set to 5ghz only.. that will keep it from interferring with the existing router.

  • HT4910 hello i have installed icloud on my mac, ipad and iphone. but when i create a document on my mac it does not show up on Pages file in my Ipad/ How do i get it to go from one to the other? and how do i back up to icloud from my Mac

    Hello
    I have uploaded and installed ICLOUD to all three of my devices MAC, i pad nd Iphone.
    From Ipad to Iphone i am able to retrieve PAGES documents as i write them. BUT now that i am back home i see that none of the new documents i am working on which are stored on my desktop are showing up in my PAGES file on my Ipad or Phone.
    How do i save to icloud from mac, how come i can't retrieve docs from IPAD to MAC either?
    should i back up my mac ICLOUD FIRST? and if so, Where do i back it up from?
    going mad as i edit on one during the day and the other in the evening , and would like them to sync automatically
    please can you help
    thanks
    marellaopp

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • I tried to upgrade to Firefox 4. I have lost my Firefox 3.6. Firefox 4 will not open on my computer. The message say that it is not supported on thie architecture. I have OS 10.4.11 on an eMac? What do I do?

    I down loaded 4 and installed it to replace 3.6. I then tried to launch it and got the message that it is not supported on this architecture.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • Time capsule says: This backup is too large for the backup volume.

    What should I do. Has been working quite happily for a year or so. Now every time it tries to back up i get the error message "backup requires 66.4 gb but only 45.3 available."

    Welcome to the discussions!
    Your Time Capsule is almost full. You have a few options:
    1) Add another Time Capsule to keep your current backups and continue future backups. This is a good solution, but it requires an additional purchase.
    2) Erase the Time Capsule disk that you have now and start over with the backup process. If you don't really need all the backups to indicate how your computer looked months ago, this is an economical option.
    The downside to this option is that you will be without backups at all during the period between the time you erase the disk and make master backups for each computer. In the unlikely event that one of your computers might fail at the wrong time, you would lose the data on that computer.

Maybe you are looking for

  • Calling a WCF service from pl sql using a scheduler.

    Hi I am completely new to everything pl sql related. Right now, I need to call a WCF service method that returns a dataset. Then i need to take that dataset and insert the data into a table in the database. I want to do this by having a scheduler be

  • Can't edit text in template

    Ok, so I've opened up a template in Motion, inserted my media into the drop zones and everything has worked so far. I go to edit the default text that the template has... and nothing. I can't find anything under the inspector to edit the text. I clic

  • Problems customizing icons in kde 4.8

    I have installed a new icon theme on my computer called Blue Sora...The problem is that I want to change the default icon for .jpeg images.  I go to File Associations->Configure file associations in my system settings and I change the icon for jpeg i

  • PLZ HELP ME.I BEG YOU ALL!! ABOUT MY SOUNDLESS VIDEO

    hi again... i am getting desperate. can someone help me plz. When i play my video in my ipod, it has no sound. I had tried few video converter programs that some of you recommend.But it doenst seems to solve my problem. Here is the story. Videora ipo

  • Issues with pattern fill in ps 6. Why is it making each tile a different color?

    HELP!!! I've used the Fill>Pattern to tile my seamless patterns tons of times and never had this issue. Suddenly , it started making each tile on the large canvas a different color when I apply Fill>Pattern. At first I thought it was a tip or guide t