I have drop box installed but I get e-mails that and the attachment goes to drop box but I can't open most of the files
I have dropbox installed and most files that go to drop box open OK but some files fail to open and I get a message that my apps don't support thoses files. Help!
Certain files like WMV need 3rd party Apps to open.
Similar Messages
-
Can anyone help me with this problem?
Try
http://www.fadingred.com/senuti/
Senuti is an app that allows you to move stuff from an iPod to your mac. -
I am using iWeb 3.03. I have prepared a new website and several pages. Attempts to publish have failed. An error message appears, which I don't understand. The message includes a note that says "try again later." What might I try next to get past this problem?
Duane FitzgeraldTry the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
reboot.
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
OT -
I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank. I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook. I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?
This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows -
I downloaded Mac OS X and I am having problems installing it: I get messages saying that it is was corrupted during downloading. I have tried re-downloading (which Appstore tells me is free) but everytime I get the same message. Help
Are you using dial-up, cable, or DSL? Do you have a slow or fast connection? The former is likely to make it difficult to get a reliable download of a 4 GB file.
-
I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Hello all.. I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box. I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state? Sorry for the long question. Hopefully one of you clever people can help. SimonClntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ? -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
i try to get my first access and add a book to my library but all it says is E_ADEPT_CORE_USER_NOT_ACTIVATED...and it keeps telling me this although i have the right email and the right password...i am using a tolino..i just got it so it acnt be an update problem
Eva:
Yes, updated to firmware version 1.28. That was the 1st thing I did.
Then I authorized my iRiver. ADE had been installed way before I got
iRiver. It has a couple library books there. I hoped to read them on
iRiver. After I read this thread and another one at
http://www.mobileread.com/forums/showthread.php?p=1832825, I used
CtrlShiftE and CtrlShiftD to de-authorize both my computer and the
device. Then authorized both and had to download books again, deleted
previously copied books from iRiver and copied fresh copies. No luck.
Don't know what to do next. Emailed iRiver. -
My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)
See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.
I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it. -
cannot install itunes I get a message that apple mobile device failed to start.. verify that you have sufficient priveliges to start system services
Hello, Edward.
Thank you for visiting Apple Support Communities.
I think the best option would be to completely uninstall all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, try the steps in the article below.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Cheers,
Jason H. -
when i try to install itunes i get an error that says to verify that i have sufficient privilege to start system sevices. I am the system administrator.
Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
The new update for my computer is ready to be installed. When I try and install it, I get a message that my start up disc is full and does not have enough room. I have tried every avenue I can think with no resolve, of course, I am not a computer genious. Can anyone at all help? Thank you so much.
You need to discard or save to an external disk and then discard some of the stuff we all tend to keep forever (movies, music, pictures, docs, apps no longer used, etc.). A clogged up disk also does not function ideally either.
Maybe you are looking for
-
Synchro problem in fcp4.5 SOLVED!!!!
playing the movie on the monitor gives sync. problems (external video <all frames) when I play the movie in the viewer or canvas without turning the monitor on (ext.video<off) there are no sync. problems . problem solved : easy set up "fire wire<basi
-
Hi, on Win 2003 I'm updating a 10.2.0.1 to 11g using Database upgrade assistant (start/program/ora 11g /...) and it fails with ORA-01722. I looked at logs and found in C:\app\Administrateur\cfgtoollogs\dbua\orcl\upgrade2\Oracle_Server.log: The follow
-
Oracle Intelligent Agent Startup Error
Whenever I try to startup the Oracle Intelligent Agent on my DB server I get the error: could not open emtab at /var/opt/oracle/emtab. I am using Oracle9iR2 and have installed the complete package. I did a search of the HD and this file does not exis
-
Writing BLOBs form Orcle to a file server
We are trying to use PL/SQL code to write Word Documents stored as blobs in Oracle to a users Temp directory or a server directory. Te blos have been added from a legacy PowerBuilder applicaiton that we're trying to migrate to Oracle's Web Appliation
-
How can I fix the lond delay (15 min.) between the time I select a song to the time it begins playing?