I have Numbers 2.3 installed on my IMac and have created several spreadsheets when I try to open the latest one I get a message "You need a newer version to open this spreadsheet. Do have to buy the new one and will it work with my OS - 10.8.5?

Do I have to purchase the new Numbers to replace my version 2.3 in order to open spreadsheets already created? Will the new version work with my OS - 10.8.5?

If you are running Mavericks, and the Mac App store says you are up to date, then you have Numbers 3.2 as well as Numbers 2.3. You are getting the "Need a newer version message because your Mac is trying to open the document using Numbers 2.3.
Launch Numbers 3, then open the document from within that app, or right click/control-click the document and choose Open with Numbers 3.x.
Regards,
Barry

Similar Messages

HT203175 When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer. My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the sam

When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer. My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the same problem occurs.

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

I have air port express 802.11n and imac ver 10.7.5. When I try to set up my wifi I get error message 'that the version mac os x is not supported' Help?

I am trying to set up wifi using air port express 802.11n version 1.3 on my imac os x ver 10.7.5. Get error message Air port can't be installed on this disk that the ver of mac not supported - Help????

Please check the model number on the side of the AirPort Express in the faint print. It will start with an "A" followed by four numbers, as in A x x x x.
Post back with your findings.

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why? Others couldn't open them so I sent them to myself and get the same message. Doesn't seem to be a size issue as I've tried with really short clips (4 seconds). As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto. It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure. Thanks for any and all help!
Jim

When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto?

When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: 140735120521568 GPUManager 2 Sniffer Result Code: 3 Help

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3. I have trashed the CUDA program and reinstalled Premiere and AE but no joy. Same message followed by another error box with options to Retry, Send to Apple or ignore. I have tried all 3 options but nothing works! Every time I launch either program same message appears.

Hi? today i too have this problem.
I found a solution here: https://discussions.apple.com/message/25137524#25137524
Now all good.
Good luck!

When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks...)

When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks... the first exported to iDVD ok, but the next one of 15 minutes balked for the same reason -- too long...)

I wish I had a mac :-P
Sadly, this is Windows machine so I dont have a non-iOS version of iMovie. I have 2 ideas left. The first is xfering the project to my iPhone 4 and trying to export it there (if that works, awesome but geez apple the iPad 2 is way more powerful than the iphone 4.. youd think I wouldnt even have to attempt this). The 2nd idea is to start at the end of my movie and delete clips and sounds backwards, trying to export each time to find whatever clip is causing the issue (when the movie was 5 minutes it mixed no probem, so I only need to go that far).
Wish me luck?
Also, is anyone else besides me and the 5 dudes in the other threads having this issue?? Speak up, guys - Apple cant a fix a problem they dont know about.

When i try to download mavericks i can't . it said that i need at least 2 Go of memory but i have a lot. What to do?

when i try to download mavericks i can't . it said that i need at least 2 Go of memory but i have a lot. What to do?

Also, if you really do not know or sure of what you are doing,
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, download, install and use a data cloning app, like CarbonCopyCloner or SuperDuper to make an exact and bootable copy (clone) of your entire Mac's internal hard drive.
This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUoMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest version of Mavericks by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process of installing OS X 10.9 Mavericks from the Mac App Store.

HT4539 When i try to update/download any app i get a message saying your account is not valid on the indian store go to usa store, can anyone help fix this prob of switching stores. Thnx

When i try to update/download any app i get a message saying your account is not valid on the indian store go to usa store, can anyone help fix this prob of switching stores. Thnx

Change to UK App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

HT5622 When I try to purchase in my games I get a message about "enviroment: sandbox", and I can't buy anything. Why?

When I try to purchase in my games I get a message about "enviroment: sandbox", and I can't buy anything. Why?

Not good !
Same happend to me for an huour ago.
I don´t no the resens, my account are no wrong
and money existing.
What can they more wish ?
I don´t think it can help to register a new account.
Because you have same name and ID:nr
If you like, tell me whats happend after 4 oct to now

When I try to update my iPod touch I get a message that the iTunes is already upgraded. My iPod is 4.1

When I try to update my iPod touch I get a message that the iTunes is already upgraded. My iPod is 4.1

Do you have a 2G, 3G or 4G iPod?
A 2G can go to 4.2.1
A 3G and 4G ro 5.1
Identify yours yours here:
Identifying iPod models
Do you have iTunes 10.6 on the computer?
What computer OS and version do you have?
If a Mac OSX 10.4.11 you need to update to t least 10.5.8. With 10.4.11 you can only go to iTunes 9.X and going beyond 4.1 requires 10.X

When i try to redeem my itunes cards, i get a message that says my session has timed out--i updated to the latest version--still, no luck redeeming cards-help!

when i try to redeem my itunes cards, i get a message that says my session has timed out--i installed the latest version of itunes and tried again--no luck--what else can i do?

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

When i try to upgrade to ff8 i keeping getting a message to restart my computer which i have done 5 or 6 times and that message keeps coming up can u help please. Also when i go to remove the download i get the message to restart computer in English

cannot open Fire fox i keep getting a message to restart my Computer but that does not do anything i still cannot open Fire fox this has happened about 5 0r 6 times

Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
If that doesn't solve the problem then remove the Firefox program folder to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I cannot open iphoto, this message occurs each attemptTo open this Aperture library in iPhoto, you need Aperture 3.3 or later. Click Update Aperture to buy the latest version of Aperture from the Mac App Store. After installing the update, open your

i do not have Apeture, nor do i want it, how can i access iphoto ?

When did this problem first occur? Directly after you upgraded to Yosemite and iPhoto 9.6? Or after a crash?
If this happened directly after the upgrade, look into the iPhoto library package, but do not change anything there - be very careful.
A healthy iPhoto Library should look like this, when you ctrl-click it in the Finder and use the commend "Show Package Contents".
First of all - does the iPhoto Library show the correct "fan of Pictures" icon?
Is there an additional folder "Old Masters" in addition to your folder "Masters"?
When you select the file "Info.plist", does the preview show correctly iPhoto Library 9.6?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleGetInfoString</key>
<string>iPhoto Library 9.6</string>
<key>CFBundleShortVersionString</key>
<string>9.6</string>
</dict>
</plist>
If it is not showing iPhoto but Aperture, try to trick iPhoto in opening the library by setting the File extension of the iPhoto Library to "photolibrary"
But if you are seeing a folder "Old Masters" in your library, you are having a bad library corruption. Then look into that folder, if it contains any photos and post back.

I have Numbers 2.3 installed on my IMac and have created several spreadsheets when I try to open the latest one I get a message "You need a newer version to open this spreadsheet. Do have to buy the new one and will it work with my OS - 10.8.5?

Similar Messages

Maybe you are looking for