I have premiere pro CS6 and a blackmagic intensitiy pro HDMI capture card
I have premiere pro CS6 and a blackmagic intensitiy pro HDMI capture card will I be able to capture HD TV progrsms if I have a HDCP compliant monitor?
No.
As soon as you connect the HDMI cable from your cable box to the BM card it will be seen as non-HDCP compliant.
Similar Messages
-
How can I get a frame accurate output to tape using Premiere Pro CS6 and a Blackmagic Decklink Extre
i can set the frame offeset inside the Export to tape tool (which BTW is horrible, you can't scrub, you MUST use ":" or ";" in the timecode fiellds or the deck just goes to the beginning of the tape etc), but I'm still 12 frames off. there is a frame offset in the Blackmagic device control settings, but that does nothing for the output to tape.
I don't want to have to export a quicktime and then open it in Final Cut to output to tape, the whole object is to get away from FCP because it's a horrible ghorrible program.....TIA
This particular system is an 8core Nehelem Mac Pro with 32GB of ram, OS 10.7.5.I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.
-
Premiere Pro CS6 and Media Encoder CS6 Color shift on export
Hello,
I am working on an early 2008 Mac Pro with 2 X 3.2 GHz Quad Core Intel Xeon Processors 32 GB of RAM a NVIDIA GeForce 8800 GT 512 MB Graphics Card and I am running OS X 10.8.2.
I have the updated Version of Adobe Premiere Pro CS6 and Media Encoder CS6 through the awesome Subscription program that Adobe has started.
My footage is shot with the Canon 1D Mark IV shot 1920X1080 at 24 FPS
I am importing the camera files and then exporting them after I cut them up in to Quicktime Pro Res 422 HQ files
With the technical explination out of the way here is my problem. I have color right from the camera files that I like. and with out doing any thing to change the color I export the footage and get a dramatic color shift. The exported file looks desaturated and slightly green.
I have tried using Media Encoder CS6 to export my footage and that has the same result.
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I have attached three screen shots that show the color shift exactly. Now what I need is a solution. What I am not seeing is color settings for Premiere. I am totally open to any suggestions on what I might be doing incorrectly.
BenBenjamin Peterson wrote:
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I've been doing this for a few years now, and have come to some conclusions. Basically, the difference between still photography and video is like the difference between playing the trumpet and the sax. What you bring to the sax from playing trumpet is your ability to read music, what you know about composition, blending while playint with others, ect. But playing trumpet tells you nothing about how to physically play a sax. So it is with still photography and video.
For starters, your carefully calibrated computer monitor is just that, a computer monitor. It doesn't display the correct working space for video. What you need for WYSIWYG in video is a monitor that can show you the Rec.709 working space. Rec.709 has a different gamut, a different gamma, probably a different white point (D65), different phosphor colors, etc., etc., etc. Enought differences that it's difficult to make a computer monitor that can successfully display Rec.709. Yet there are a couple of computer monitors that can do this (a few Eizos, one HP). The vast majority of people doing serious color correction work in video use a production monitor for just this reason.
But a production monitor isn't enough. You also have to make sure that the signals you're sending the production monitor are correct. There's a sub-industry making signal converters for signals from NLE video cards (usually RGB based) -> signals for production monitors (usually YUV based).
That said, it is certainly possible to get a very good match between your NLE suite and a DVD / BD as displayed on an HDTV. But it's not as simple or easy as a calibrtated computer monitor for still photography use.
This is probably part of your problem. But Quicktime is probably the root of it. Quicktime is, well, I guess the polite way of saying it is that Quicktime is problematic. It gives all kinds of problems. Most people have abandoned it. You should too. -
FAQ: How do I trim in the Timeline using keyboard shortcuts in Premiere Pro CS6 and CC?
You can now trim with a lot more keyboard shortcuts in the Timeline in Premiere Pro CS6 and CC. See this article for details: Timeline trimming using keyboard shortcuts in Premiere Pro CS6.
I'm relieved (if a little frustrated!) that others have the same issues, it makes me feel at least it's not just me! :-)
I am running Windows 7 64 bit Intel quad core processor 8Gb RAM if that helps Jim?
Another quick test shows I have exactly the same issues as shooternz and Ann Bens above at 7 & 8 respectively. An audio only or audio/video clip from Bin to SM and I can add markers on the fly perfectly. Audio/video from the timeline to SM works just the same. Audio only from the timeline will not work however.
I tried linking a video clip to my audio clip to see if that would allow me to add markers then unlink and remove the video... but when I opened that in SM the add marker button was greyed out and the keyboard shortcut (M) didn't work either!
Curiouser and curiouser... -
Difference between adobe premiere pro cs6 and cc
Whats the basic difference between adobe premiere pro cs6 and adobe premiere pro cc?
http://helpx.adobe.com/premiere-pro/using/whats-new.html
This shows you what's new in Premiere CC 2014, and you can use the links on the left side of that page to see earlier updates.
(CS6 is an old version, which was followed by CC and CC 2014)
And of course CC is subscription based and CS6 is a program you used to be able to purchase and own forever. -
Im working in Pre Pro Cs6 and my audio isn't coming with the rest of the footage even though Ive used the same camera, same setting etc for the clips. One works, subsequent clips don't. This is frustrating. I get an Adobe message telling me there is an error and I keep getting catastrophic shut downs and crashes. please HELP
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
But... if you are having computer crashes, you may have a hardware problem
BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0 may help... or,
http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/ -
Premier Pro CS6 and MOD files.
I am thinking of getting Premier Pro CS6 and wonder if it will work with MOD files. My Panasonic camcorder records in MOD format. I notice that my Media Encoder 5.5 won't work with MOD file so I don't want to spend $$$$ on Premier Pro only to find out it doesn't work tih MOD files either.
ThanksPremiere Pro does not support mod files.
Some are lucky by just changing the extention.
Others have to convert:
http://gilles.bihan.pagesperso-orange.fr/converio_095.htm
However Premiere Elements does support mod files. -
Premiere Pro CC and the New Mac Pro (2014)
I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
1. Is this true?; and
2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
My new Mac Pro will have the following configuration:
3.5GHz 6-core with 12MB of L3 cache
32GB (4x8GB) of 1866MHz DDR3 ECC
1TB PCIe-based flash storage
Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM eachMy main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading. I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
Enviado desde mi iPhone
El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
Re: Premiere Pro CC and the New Mac Pro (2014)
created by BanksMeador in Premiere Pro - View the full discussion
I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
I get similar playback performance to what I experienced on my 09 Mac Pro tower.
Any insights on getting better playback performance in this scenario would be greatly appreciated.
Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hi there guys! I´m very, very, VERY close to buy a full configuration iMac (the late 2012 27" model) but I have reed in different forums that Adobe Premier Pro CS6 and other applications from Adobe such as After Effects DO NOT support the graphic cards found in the new iMacs....
is this true??????
i really wouldn´t understad the logic behid the decission of picking a graphic card that is not supported by one of the leading video editing sofrware used today.... specially when this computer is suppoused to be an Editing Animal....
I hope this rumor is not real..... then I can be just... really happy and get my new desktop computer and work, work, work, work
thanks for your attentionHi there Daniel, thanks for paying attention to this subject. Today I got an answer from Larry Jordan from his blog (I believe he is one of the "videoguys" from http://videoguys.com and he said that actually adobe does not support those GPU that we will find in the new late 2012 iMacs. However it seems there is a way to make that work out.....
here is his review on his new iMac, at the very botton you will see comments from people and his answers... one of the last coments is mine regarding this subject, this is what I asked and his answer:
mGabo Jan 18, 2013 08:50Hi there Larry, I reed in your other post on your iMac that Adobe didn´t support the Nvidia graphic cards found in this model, I have been asking in forums about this and people say Adobe does supports them……Do you know if Adobe now works fine with these cards?
Larry Jan 18, 2013 11:10When I contacted Adobe about this a couple months ago, just after the release of the new iMacs, I was told that Adobe did not support the graphics card at that time. There is, however, a workaround, which I’m hoping to write up this weekend.Larry
mGabo Jan 18, 2013 12:28 oh! great Larry! please post the link of that article so I can follow that!many thanks
here is the link of this article: http://www.larryjordan.biz/app_bin/wordpress/archives/2084/comment-page-1#commen t-7853
so far I haven´t find anyone who can expalin to me how can I get these Nvidia GPUs working with adobe premier and aplications alike from adobe. -
My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?
Once you setup your wife's account you can enable fast user switching to make it easy to switch accounts:
OT -
Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton -
I have dovwloaded photoshop CS6 and bridge is not responding. What to do ?
I have downloaded photoshop CS6 and bridge is not responding. What to do ?
Could you provide a more detailed inquiry, please? What happens while in Photoshop when you choose File > Browse in Bridge? What happens when you choose Applications > Adobe Bridge CS6 > Adobe Bridge CS6.app?
-
I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?
Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O. -
I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem. Not sure what to do next.
It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.
-
Hello, I have an Apple TV, and a Mac Book Pro X Lion 10.7.5 bought it on March 2012. But there is no AirPlay how is it possible? Where do i get it?
Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.
Maybe you are looking for
-
IDM 8.1 deprovisioning of domino user thowing error
Hi, I am using Sun IDM 8.1. I configured Lotus Domino as an resource. I am able to do the following successfully. 1) Creation of a user 2) Modification 3) Change password I am facing problem in deprovisioning or deleting a user from the resouce. Erro
-
Has anyone else experienced this?
-
Default settings for activating warranty subscreen
I have a requirement to activate the warranty subscreen for maintenance equipment. When this subscreen is activated, the "inherit warranty" and "pass on warranty" options are selected by default for equipment that already exists in the system. I wa
-
JAVA MPG code [/i] or whatever the tag is
This is an MPG code I am working on. It can build and run, but it does not find the average and I'm not sure why. Ithink I have something out of place, possibly missing a key piece of code. I have spent WAY too much time trying to figure it out by tr
-
Passing sequence number to queue table
Hi anyone, I am very new to the advance queue. Have a user_info table. I would like to pass the userid sequence to the queuence table up on insert or update on to the usere_info table.. Here is the step I did so far. create type user_id as object(use