I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that.
I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that. I have tried to creat new file but the message unknown error (-50) pops up. Also these files have played in the past
We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong
Similar Messages
-
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.
You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3). -
I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?
Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W. -
With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
Thanks
RozAre you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
When i try to download additional garageband sounds, it states that I am not connected to the internet but I am. How can I fix this?
I have a new Macbook Pro, OS X 10.9.3 and the latest Garageband that came installed.However, I can't see any of the new sounds in garageband??
Have you restarted your computer after installing the additional content?
How many drummers do you see, when you select a patch for a Drummer Track?
If the inapt purchase has been installed, you should now be seeing 18 drum patches and not only SoCal:
Also, if you open the "Lesson Store" view, there should be now several free basic guitar and piano lessons available for download. -
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.
Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
Russ -
i want to use the internet on my ipone4 but it says that im not subscribed to a mobile dater service how can i fix this
Subscribe to a mobile data service.
Call your provider and make sure you have a data package. -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?
Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
Also see:
*https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
*http://kb.mozillazine.org/File_types_and_download_actions
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox] -
My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!
Thanks R_Kelly:
Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2400 MHz
Built-in memory: 3069 MB
Free memory: 1631 MB
Memory available to Photoshop Elements: 1598 MB
Memory used by Photoshop Elements: 69 %
Image tile size: 128K
Image cache levels: 8
Video Card: ATI Radeon HD 4800 Series
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series
Video Card Memory: 512 MB
Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
Photoshop Elements scratch has async I/O enabled
Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported. -
I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?
Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa. -
I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?
Are you using the YRW composite connectors on the TV or the RGB composite connectors? - the cable will only work with YRW and the correct input choice on the TV - if you are connecting correctly then I am sorry I don't have any other suggestions
-
my little sisters ipad mini is disabled, it does not say anything but that no plug into itunes or countdown, however it is connected to my mums iphone apple account, she can not lose anything as its for work, how can i fix this???
Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212
Maybe you are looking for
-
Smart View for Essbase Not Available in Planning Rapid Deployment
I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using
-
How to add a dynamic saerch help for a standard field
Hi, As per my requirement I need to add a search help to a Satndard Field in PO. The search help is dyanimc. CAn anyone suggest how can we achieve this functionality. The values to be selected are stored in some Z table. Smriti.
-
How to convert Oracle Queries into SQLite Queries
Hi.. Is it possible to convert Oracle Sql queries into SQLite queries using java ? Regards, Ajay
-
Securing DSP calls via Web Services Mediator API
I have been implementing a client of DSP 3.0 services using the static Web Services Mediator API. I am successfully calling these through the AL Service Bus, where I have deployed the WSDL generated from the DSP. We are calling this from a rich clien
-
Where can I find free back ground music and some sound effects?
Hello out there. Like a lot of amateur editors I am looking for a web site to download free instrumental back ground music for my projects. I am looking for acoustic guitar, drum-n-bass, and also a few sound effects. If you have used or know of any s