I just dropped my iphone and the power botton stopped working and the screen went black i allready tried to connect it to the computer and nothing what can i do

my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do

You can take it to Apple and get replaced as long as you pay for the replacement.
Allan

Similar Messages

I experienced the same prob with Yosemite where my screen went black on startup. I was able to "fix" it and log into my qccount but my mac is running super slow now even just at simple clicks and commands. How can I fix this? Help please!

I updated to Yosemite and everything worked great for a few days until earlier. My mac was plugged to my TV via HDMI wen everything hanged. I did a hard reset and the screen was just black during startup. There were the startup sounds but no images from the screen. it did have images at one point where it gave me options to reset my password. I did a couple of hard reboots and pressed Alt/Option or Cmd+Option+P+R based on previous posts. Didnt know which w but I was able to access my account and log in. My big problem right now is that my Mac became super slow. Even at the simple commands/clicks

My mac was okay up until a few hours ago. If anyone knows how to fix this, would really appreciate your help. Thank you!

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Since installing iOS 8.1.2 on my iPad, the facebook app stopped working. Is there a way to fix it or go back to the previous iOS?

Since installing iOS 8.1.2 on my iPad, the facebook app stopped working. Is there a way to fix it or go back to the previous iOS?

Sorry, no. If Facebook isn't compatible with the current iOS it's on Facebook to make its app compatible.
Have you tried to access facebook via safari? I personally abandoned the app years ago due to it being very buggy. I access it via safari with no issues

A 200 - The 3 little buttons by the power button stopped working

Win XP, SP2, 1Gb memory, nothing else special.
Those pretty little buttons have stopped firing up software. The only function seems to work is that the one next to the power button turns the machine on!
Any Ideas?
The only recent change is I upgraded Microsoft Office 2003 recently.
The buttons ARE set to fire software up.

Hi
Well, I dont know why it doesnt work but these 3 little buttons are Toshiba Controls.
Did you try to update the controls driver? You can find it on the Toshiba website under
http://eu.computers.toshiba-europe.com and Support & Downloads.
Furthermore you can check the settings. Im not sure but I think you can find them in Control Panel .
Bye

HT1222 Since I have installed the iOS 6 I have not been able to get my Internet / wi fi connection freely ..... What can be done..... Please help

Need to know why I am not getting Internet / wi fi connection frequently and smoothly as I use to before installing Iso 6 ... Can I change back to the old system or do something about it. Thanks ...please help

You can't downgrade the iOS.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Iphone 3rd party power cords stopped working

All of a sudden my third party power adapters are no longer working. Any one know why??

The Phone is getting charged directly through USB though.

My iphone 5s screen went black...tried homeand power buttons together apple logo showed up for a few seconds then black again? Can in fix it or do i need to take somewhere?

I am live an hour from verizon store and three hours from an Apple Store. I would like to try something before driving that far.

You can try restoring the software first (which is what they will do at Verizon/Apple store).
http://support.apple.com/kb/ht1414

When i tried to hook my macbook pro up to a projector to show a dvd, the screen on the computer and projector screen went black as if it were trying to connect. yet it didn't show up. The dvd played when it wasn't connected to the projector. any ideas?

When I tried to hook up my macbook pro to a projector and play a dvd, the dvd wouldn't work. I would only get an error message. The dvd worked when it wasn't connected to the projector but doesn't work when it's connected. It just shows a blank screen as if it's trying to connect. Also, the connection works when I don't play the dvd. Any ideas?

Hey there lynmrigg,
It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
Apple computers: Troubleshooting issues with video on internal or external displays
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

My iphone 4 screen went black with a loading circle thing on the bottom

my phones been acking wierd the last 2 days. first more then half of my contacts have went missing. i tryed to add them again and my phone deleted them. then today my screen went black but theres one of those loading circles on the bottom of the screen. i dont really know what i have to do. please help:(

Do o hard reboot by shutting it down by holding the home and power buttons at the same time until the "power off" appears. Shut it down, wait a few minutes and the turn it back on.

Power Cover stops working pretty much as soon as it starts

So, as soon as I touch the screen or use an external mouse, the power cover stops working. If I only use the keyboard or touch pad it works fine. When it stops working the Event Viewer has any of a few messages but the most often one is that a device reported
inconsistent contact information. I've tried all of the remedies suggested earlier (uninstalling, rebooting, letting windows re-install it on boot up, manually installing the driver, etc, etc.) and nothing is fixing this problem. This is even after the windows
8.1 update. I just got the power cover today and it's essentially a brick.
Any ideas? This is 100% reproducible (and I live in Redmond if anyone wants to see this). While I've installed a bunch of software, most of it is windows stuff, office and visual studio and none of those are running when this happens. The mouse I'm using
is a wedge mouse, also from Microsoft and obviously the touch screen is the touch screen but there seems to be a serious issue here.
Jeff Levinson | ALM MVP
Author, "Software Testing with Visual Studio 2010"
I was wrong - it just stopped working and I didn't use the external mouse or the touch screen.

Hi,
How about your problem now? If problem persists, Please try to run this command to repair online image:
dism /online /cleanup-image /restorehealth
Make sure you run this command as administrator.
Roger Lu
TechNet Community Support

Power Adapter stopped working :(

I have a set of FPS2000 cambridge speakers and today the power adapter stopped working. Been looking today for a replacement but can't find one. anyone know which one will work as a replacement?
thanks

guess what i am also in this situation. i have the creative inspire 6700
its specs are 3.5 v, 5 A, 67.5 vA AC
im currently using, but its doggy 2 V DC
i have been looking on e-bay and such for ages. i really need a proper one. can anyone help? i've e-mailed customer support and they say they dont deal with this product anymore.

HT4061 My screen went black. But if I hold down the Siri button it will responded. Is there something I can try or let the batterie die??

My screen went black. Siri will responded when I hold the button and will make my phone calls. How do I get my home screen back

See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons.

MDB and Database - Listener port stops working

Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?

usmanchaudhry wrote:
Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
a simple JDBC rollback won't do it.
which app server are you using?
which jms provider?
%

I just dropped my iphone and the power botton stopped working and the screen went black i allready tried to connect it to the computer and nothing what can i do

Similar Messages

Maybe you are looking for