I lost my iPhone 4 on august 29 @ a restaurant in Waldorf, MD. I tried using find my iPhone app to find it. The program is not locating it. Shows a red dial button. Is there a way to find where it is? I frequently get a message the pin I entered is wrong.

How can I find my iPhone 4 the tracker is not giving me a location

You won't be able to find it if the thief has
turned off the phone
restored the phone
removed the SIM

Similar Messages

  • I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?

    I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?  I do nto care about anythign else.
    Here are the steps I though I took this morning:
    Backup iPad
    Connect to iTunes and downlaod newest version of iTunes and then newest iOS
    restart Vista Laptop
    upgrade to newest iOS
    I knew somethign was wrong when it took about 6 hours to upgrade the iPad
    at the end it errored with this message error (-50), but the upgrade worked
    I was expecting to see all my photos but didn't see them
    I have tried a restore to a back up 2 times.  The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
    I tried it again 2 hours ago and same message.
    They are very valuable to me and so now I am panicking
    Your help is much appreciated

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • I have an iphone 3 and outlook 2010. I cleaned up all my outlook contacts and tried to sync but not all of the existing contacts on my phone show up in outlook. Is there a way to sync all numbers on iphone to oulook so I can clean them up from my desktop?

    I have an Iphone 3 and use Outlook 2010. I just recently tried to sync with my desktop using Itunes and once they were synced I cleaned up alot of the contacts using outlook but when I tried to sync them not all the information from outlook made it to my iphone. Additionally, there are a lot of contacts in my iphone that are not showing up in outlook. I have tried several things but nothing seems to work. Any ideas?

    So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!

  • InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

    The situation:
    We are working with the InCopy feature (checking in and checking out ICML files).
    The problem:
    I might have saved a document with an ICML file still checked out.
    The question:
    Is there a way to find out which document was saved with the ICML file still checked out?
    or in other words:
    Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
    Thanks for any help!

    Hello Sumit Singh,
    thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
    So, is there a way to trace back where an ICML has been used?
    Is it possible to find out in which document the ICML is still checked out?

  • Is there a way to find the temporary table that are created or read during?

    Hi All,
    I'm working on performance optimization where I have to find the temporary tablespaces that are created or read during runtime? Is there any way to find it?
    Can you please also tell me how the temporary tables are created? And after each run time whether the data is getting deleted or the whole table is getting deleted?
    Whether these tables are created only during runtime? What are the naming conventions for all the temporary tables that are created?
    Is the table creation has anything to do with Delta or Full load?
    Regards,
    Kartik

    Stephen Tyler Bloom wrote:
    When they come out with the next garageband, they should add that feature .
    be sure to let Apple know:
    http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

    What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

    No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
    Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
    Regards.

  • Is there a way to find out how much storage I have used on my iphone4s?

    I am new to icloud and want to back up my phone but it is saying I have too much data to back up to the free 5.0GB.  I can purchase more but note sure how much I will need.  Is there a way to find out how much storage my phone is currently using?

    Go to Settings - General - Usage, and you will see a breakdown of all your apps along with how much space they are using.
    My guess is that you have a lot of pictures that should probably be exported to your PC/Mac to free up your space.   5GB is a lot for one phone, you should be able to get by without buying more storage if you do a little housecleaning first.

  • Is there any way to find out the dependency information for column of view?

    Does Oracle provide some view / table / pl/sql pkgs to find out the dependency information for column of view ?
    For example, there are two table mytable1 (col1 varchar2(10), col2 date) & mytable2 (col1 varchar2(10), qty int), and there is one view myView as
    select mytable1.col1, col2, qty from mytable1 inner join mytable2 on mytable1.col1 = mytable2.col
    Can I get some information such as myView.col1 is come from mytable1.col, myView.col2 is come from mytable1.col2, myView.qty is come from mytable2.qty
    ?

    I can get the information about the columns list in table/view from ALL_TAB_COLUMNS table, but I wish to know the column in the view is come from which original table's column.
    Is there any way to find it out from Oracle meta data / through any PL/SQL packages ?

  • Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

    Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

    '''Here is an update to my former response.'''
    Here is a safe way to look at an email which you think is suspicious:
    * right click on the message and select 'Save As'
    * the file name will be the email subject followed by an extension of .eml
    * store it in a folder you can find easily, such as your Documents
    * using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
    * even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
    Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

  • Is there any way to find out where a standard text is used?

    Is there any way to find out where a standard text is used?
    We can see the text from SO10, but i want to find out where it is used.

    HI
    juct check out this thread
    How to find Standard Text
    a similar query is answered here
    hope this helps
    regards
    Aakash Banga

  • It's There a way to find out where my new phone is?

    I ordered new phone, is there any way to track where it is? It shouldn't be here for another few days but just  wanted to see what state it is in. Thanks if anyone knows or doesn't.

    You should have a confirmation email or text when the phone ships and should have a tracking number within.

  • I imported 100 photos, when I was reading photos iphoto crushed, and when I restarted iphoto all photos imported had disappeared!Is there a way to find them. They were imported, they can not have disappeared from the hard disk?

    I imported 100 photos from my camera (Canon) into iphoto. The importation went well, and when I was watching the photos, suddenly iphoto crashed. I restarted iphoto and realized that the photos had disapered. The events are availbble into iphoto but they are empty, the photos have dispeared. I can not believe they disapeared as they have been imported and read once, they must be hidden somewhere on the disk? Is there a way to find where they are?

    Assuning you're running iPhoto 9 or later try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    OT

  • Is there a way to find out details about, who approved the RMA on system using front end or back end?

    Is there a way to find out details about, who approved the RMA on system using front end or back end?

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • Is there any way to find text highlighted in adobe reader and automatically copy it to comment boxes?

    If I use a pdf highlighted in Adobe Reader (metro) in another PDF reading program, one with functionality to retrieve and list various annotations on the PDF, it simply finds "sticky note" as Adobe Reader highlights the text but fails to copy and paste it into a 'highlight' comment box. I intend to use another program with this feature automatic, from this point forward, but is there any way I can retroactively and automatically do this same task to all the other work I've done with Adobe Reader? It is, as I understand, a standard function of PDF annotation.
    Of course, ideally, I would also like this to be automatic in the future, as the Adobe Reader Metro App is generally well-designed, touch-interface wise. But this lacking feature makes finding my comments a much greater hassle than it should be (as I can see where I highlighted, but not what without traveling directly to the page)
    Also on a side note, I apparently can't delete a sticky note from within the app, what the hell

    You cannot enforce something like that. You have some options when the field is set up to allow rich text formatting, but the user can always change it.

  • Is there a way to find out, whether the student or the full version is currently installed?

    Hi everyone!
    First of all: Merry Christmas!
    A longer text with some background information is following. My question will be at the bottom.
    My computer is a good boy and it didn't disappoint me for quite a while now.
    I had once installed the student version (german) of CS3 extended on this one.
    Then, after having removed the student version some time later when needed, I have re-installed the full version.
    This time, however, it was in english and it wasn't the extended version either.
    After the software has accepted my serial id, I was quite content. It felt much better in english and I was able to use photoshop to the fullest once again.
    Today, I have gotten my hands on the upgrade version to CS5 (again in english and not extended, but that's all I need).
    After the installation guide has told me, that there are no programmes installed which are compatible to the upgrade, I was confused.
    I have realised that my current CS3 version was still the extended one, even though it was in english and it wasn't the student version either (at least, that's what I believe, because there were no "activate"/"deactivate" buttons in the help menu where it used to be in the german student version before).
    So while doing an upgrade to CS5, I had to chose CS3 extended from the list and had to type in the old student's version serial number.
    Nothing else worked, even though I've tried to chose the CS3 version in combination with the other serial number, which belong to the full version both.
    Now to my question:
    Is there a way to find out, whether the student or the full version is currently installed?
    (Other than looking at the box of course, that would be quite trivial. I am worried if the installation guide hasn't removed all components thoroughly.)
    Thanks in advance,
    Happy holidays,
    Jeff

    Thanks for the reply!
    That's what I thought as well. However, that wasn't the case. Whether it's the educational or the full version, both splash screens looked the same.
    At least for the CS3 version.I know how I was quite confused about that in the past when I'd realised that.
    The CS5 splash screen didn't say anything about a student version, but I was able to deactivate the application. I thought this was possible for the student version only.
    I've tried using the adobe clean program like suggested, but that didn't work either. The installation guide of CS5 still didn't bother asking for an older version.
    I.e.: It still used the educational serial number from before.
    After reinstalling windows on my pc, the installation guide finally wanted to know about my CS3 again.
    However, it told me, that the serial number of the full version in combination with CS3 is not valid. Just like it did before.
    Maybe it's because the full version was made in the USA and the CS5 upgrade version was made in Austria - Ireland?
    That would be really frustrating.

Maybe you are looking for